Gear Failure Modes—Importance of Lubrication and Mechanics

ASLE Transactions

Volumn 19, Issue 3, 1976, Pages 239-249

  Ku, P M ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GEARS;

EID: 0016981268     PISSN: 05698197     EISSN: None     Source Type: Journal    
DOI: 10.1080/05698197608982799     Document Type: Article

References (89)

1. Gear Lubrication Symposium, ASLE, Chicago, 111., Jan. 1959; papers published in Lub. Engrg., 15, and ASLE Trans., 2, (1959)
2. Elastohydrodynamic Lubrication, Proc. IMechE, 180, Pt. 3B, (1965-66)
3. Gear Lubrication, Inst. Petroleum, (1966)
4. Conference on Lubrication and Wear, Proc. IMechE, 182, Pt. 3A, (1967-68)
5. Proc. International Conference on Gearing, IMechE, (1970)
6. Ku, P. M., editor, Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA Spec. Publ. 237, (1970)
7. Ku, P. M., editor, Interdisciplinary Approach to Liquid Lubricant Technology, NASA Spec. Publ. 318, (1972)
8. Elastohydrodynamic Lubrication, 1972 Symposium, IMechE, (1972)
9. International Symposium on Gearing and Transmissions, IFToMM-ASME-AGMA, San Francisco, Calif., Oct. 1972; papers published in Mechanism & Machine Theory, 8, (1973) and ASME Trans., Jour. Engrg. for Industry, 95B, (1973) and 96B, (1974)
10. Gear Scuffing—State of Calculation Methods, FZG Colloquium, Munich, Germany, April 1973
11. Guichelaar, P. J., Levy, B. S., and Parikh, N. M., editors, Gear Manufacture and Performance, Am. Soc. of Metals, 1973
12. First Power Transmission and Gearing Conference, ASME, New York, N. Y., Oct. 1974
13. “Nomenclature of Gear-Tooth Wear and Failure, ” AGMA Standard 110.03, 1962
14. Rabinowicz, E., Friction and Wear of Materials. Tohn Wiley & Sons, New York, 1965
15. Archard, J. F., “Wear, ” Interdisciplinary Approach to Friction and Wear, NASA Spec. Publ. 181, 267-334, (1968)
16. Blok, H., “Les temperature des surface dans des condition de graissage sous pression extreme, ” Congr. mondial pitrole, 2 me Congr., 3, (1937)
17. Ku, P. M., “Tribology of Gears and Splines, ” Proc. Tribology Workshop, NSF, 402-427, (1974)
18. Littmann, W. E., “The Mechanism of Contact Fatigue, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA Spec. Publ. 237, 309-368, (1970)
19. Landen, E. W., “Slow-Speed Wear of Steel Surfaces Lubricated by Thin Oil Films, ” ASLE Trans., 11, 6-18, (1968)
20. “Rating the Strength of Spur Gear Teeth, ” AGMA Standard 220.02, 1966
21. Buckingham, E., Analytical Mechanics of Gears, McGraw-Hill Book Co., 1949
22. Dyson, A., General Theory of Kinematics and Geometry of Gears in Three Dimensions, Oxford Univ. Press, 1969
23. Walker, H., “Gear Tooth Deflection and Profile Modification, I, ” The Engineer, 166, 409-412, (1938)
24. Walker, H., “Gear Tooth Deflection and Profile Modification, II, ” The Engineer, 166, 434-436, (1938)
25. Walker, H., “Gear Tooth Deflection and Profile Modification, III, ” The Engineer, 170. 102-104, (1940)
26. Staph, H. E., “A Parametric Analysis of High-Contact-Ratio Spur Gears, ” ASLE Annual Meeting, Atlanta, Ga., May 5-9, 1975
27. Kelley, B. W. and Lemanski, A. J., “Lubrication of Involute Gearing, ” Proc. IMechE, 182, Pt. 3A, 173-184, (1967-68)
28. Reswick, J. B., “Dynamic Loads in Spur and Helical Gear Teeth, ” Trans. ASME, 77, 635-644, (1955)
29. Harris, S. L., “Dynamic Loads on the Teeth of Spur Gears, ” Proc. IMechE, 172, 87-100, (1958)
30. Tuplin, W. A., “Dynamic Loads on Gear Teeth, ” Proc. Int. Conf. on Gearing, IMechE, 18-23, (1958)
31. Seireg, A. and Houser, D., “Evaluation of Dynamic Factors for Spur and Helical Gears, ” Trans. ASME, Jour. Eng. for Industry, 92B, 504-515, (1970)
32. Akin, L. S., “EHD Film Thickness Formulaes for Power Transmission Gears, ” Trans. ASME, Jour. Lub. Tech., 96F, 426-431, (1974)
33. Dowson, D. and Higginson, G. R., Elastohydrodynamic Lubrication, Pergamon Press, 1966
34. Dowson, D., “Elastohydrodynamic Lubrication, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA Spec. Publ. 237, 27-76, (1970)
35. Sanborn, D. M. and Winer, W. O., “Fluid Rheological Effects in Sliding Elastohydrodynamic Point Contacts With Transient Loading: I—Film Thickness, ” Trans. ASME, Jour. Lub. Tech., 93F, 262-271, (1971)
36. Castle, P. and Dowson, D., “A Theoretical Analysis of the Starved Elastohydrodynamic Lubrication Problem for Cylinders in line Contact, ” Elastohydrodynamic Lubrication, 1972 Symposium, IMechE, 131-137, (1972)
37. Cheng, H. S., “Calculation of Elastohydrodynamic Film Thickness in High-Speed Rolling and Sliding Contacts, ” MTI Rept. 67-24, 1967
38. Dyson, A. and Wilson, A. R., “Film Thicknesses in Elastohydrodynamic Lubrication at High Slide/Roll Ratios, ” Proc. IMechE, 183, Pt. 3P, 81-97, (1968-69)
39. Turchina, V., Sanborn, D. M., and Winer, W. O., “Temperature Measurements in Sliding Elastohydrodynamic Point Contacts, ” Trans. ASME, Jour. Lub. Tech., 96F, 464-471, (1974)
40. Cheng, H. S., “A Numerical Solution of the Elastohydrodynamic Film Thickness in an Elliptic Contact, ” Trans. ASME, Jour. Lub. Tech., 92F, 155-162, (1970)
41. Fowles, P. E., “The Application of Elastohydrodynamic Film Thickness to Individual Asperity-Asperity Contacts, ” Trans. ASME, Jour. Lub. Tech., 91F, 464-476, (1969)
42. Johnson, K. L., Greenwood, J. A., and Poon, S. Y., “A Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication, ” Wear, 19, 91-108, (1972)
43. Archard, J. F., “Elastohydrodynamic Lubrication of Real Surfaces, ” Tribology, 6, 8-14, (1973)
44. Naylor, H., “The Rheological Behavior of Lubricants, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA Spec. Publ. 237, 279-308, (1970)
45. Cheng, H. S., “Rheology in Lubrication, ” Interdisciplinary Approach to Liquid Lubricant Technology, NASA Spec. Publ. 318, 263-314, (1973)
46. Bowden, F. P. and Tabor, D., The Friction and Lubrication of Solids, Pt. I, Oxford Univ. Press, 1954
47. Bowden, F. P. and Tabor, D., The Friction and Lubrication of Solids, Pt. II, Oxford Univ. Press, 1964
48. Ku, P. M., editor, Interdisciplinary Approach to Friction and Wear, NASA Spec. Publ. 181, 1968
49. Ling, F. F., Klaus, E. E., and Fein, R. S., editors, Boundary Lubrication—An Appraisal of World Literature, ASME, 1969
50. Ling, F. F., Surface Mechanics, John Wiley & Sons, 1973
51. Blok, H., “Lubrication as a Gear Design Factor, ” Proc. Int. Conf. on Gearing, IMechE, 144-158, (1958)
52. Jefferis, J. A. and Johnson, K. L., “Sliding Friction between Lubricated Rollers, ” Proc. IMechE, 182, Pt. 1, 281-291, (1967-68)
53. Dowson, D. and Whomes, T. L., “Effect of Surface Quality upon the Traction Characteristics of Lubricated Cylindrical Contacts, ” Proc. IMechE, 182, Pt. 1, 292-299, (1967-68)
54. Plint, M. A., “Traction in Elastohydrodynamic Contacts, ” Proc. IMechE, 182, Pt. 1, 300-306, (1967-68)
55. Johnson, K. L. and Cameron, R., “Shear Behavior of Elastohydrodynamic Oil Films at High Rolling Contact Pressures, ” Proc. IMechE, 182, Pt. 1, 307-319, (1967-68)
56. Dyson, A., “Frictional Traction and Lubricant Rheology in Elastohydrodynamic Lubrication, ” Phil. Trans., Roy. Soc., 266A, 1-33, (1970)
57. Archard, J. F. and Baglin, K. P., “Non-Dimensional Presentation of Friction Tractions in Elastohydrodynamic Lubrication: Part I, Fully Flooded Conditions, ” ASME Preprint 75-LUB-31, (1974)
58. Archard, J. F., and Baglin, K. P., “Non-Dimensional Presentation of Friction Tractions in Elastohydrodynamic Lubrication: Part II, Starved Conditions, ” ASME Preprint 74-LUB-32, (1974)
59. Misharin, J. A., “Influence of the Friction Conditions on the Magnitude of the Friction Coefficient in the Case of Rolling with Sliding, ” Proc. Int. Conf. on Gearing, IMechE, 159-164, (1958)
60. Benedict, G. H. and Kelley, B. W., “Instantaneous Coefficients of Gear Tooth Friction, ” ASLE Trans., 4, 59-70, (1961)
61. Bell, J. C. and Dyson, A., “Mixed Friction in an Elastohydrodynamic System, ” Elastohydrodynamic Lubrication, 1972 Symposium, IMechE, 68-76, (1972)
62. Staph, H. E., Ku, P. M., and Carper, H. J., “Effect of Surface Roughness and Surface Texture on Scuffing, ” Mechanism and Machine Theory, 8, 197-208, (1973)
63. Carper, H. J., Ku, P. M., and Anderson, E. L., “Effect of Some Material and Operating Variables on Scuffing, ” Mechanism and Machine Theory, 8, 209-232, (1973)
64. Carper, H. J. and Ku, P. M., “Thermal and Scuffing Behavior of Disks in Sliding-Rolling Contact, ” ASLE Trans., 18, 39-47, (1975)
65. Leach, E. F. and Kelley, B. W., “Temperature—The Key to Lubricant Capacity, ” ASLE Trans., 8, 271-285, (1965)
66. Matveevsky, R. M., “The Critical Temperature of Oil with Point and Line Contact Machines, ” Trans. ASME, Jour. Basic Eng., 87D, 754-760, (1965)
67. Bell, J. C. and Dyson, A., “The Effect of Some Operating Factors on the Scuffing of Hardened Steel Discs, ” Elastohydrodynamic Lubrication, 1972 Symposium, IMechE, 61-67, (1972)
68. Bell, J. C., Dyson, A., and Hadley, J. W., “The Effects of Rolling and Sliding Speeds on the Scuffing of Lubricated Steel Discs, ” ASLE Trans., 18, 62-73, (1975)
69. Dawson, P. H., “The Pitting of Lubricated Gear Teeth and Rollers, ” Power Transmission, 30, 208-271, (1961)
70. Dawson, P. H., “Effect of Metallic Contact on the Pitting of Lubricated Rolling Surfaces, ” Jour. Mech. Eng. Sci., 4, 26-31, (1962)
71. Dawson, P. H., “Further Experiments on the Effect of Metallic Contact on the Pitting of Lubricated Rolling Surfaces, ” Proc. IMechE, 180, Pt. 3B, 95-100, (1965-6)
72. Rounds, F. G., “Effects of Base Oil Viscosity and Type on Bearing Ball Fatigue, ” ASLE Trans., 5, 172-182, (1962)
73. Rounds, F. G., “Some Effects of Additives on Rolling Contact Fatigue, ” ASLE Trans., 10, 243-255, (1967)
74. Appeldoorn, J. K., “Effect of Lubricants—General Background, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA SP-237, 439-462, (1970)
75. Zaretsky, E. V. and Anderson, W. J., “Effect of Materials— General Background, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA SP-237, 379-408, (1970)
76. Bamberger, E. N., “Effect of Materials—Metallurgy Viewpoint, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA SP-237, 409-462, (1970)
77. Rounds, F. G., “Influence of Steel Composition on Additive Performance, ” ASLE Trans., 15, 54-66, (1972)
78. Davidson, T. F. and Ku, P. M., “The Effect of Lubricants on Gear Tooth Surface Fatigue, ” ASLE Trans., 1, 40-50, (1958)
79. Townsend, D. P. and Zaretsky, E. V., “A Life Study of AISI M50 and Super Nitralloy Spur Gears with and without Tip Relief, ” Trans. ASME, Jour. Lub. Tech., 96F, 583-590, (1974)
80. Onions, R. A., and Archard, J. F., “The Pitting of Gears and Discs, ” to be published
81. Rowe, C. N., “Some Aspects of the Heat Adsorption in the Function of a Boundary Lubricant, ” ASLE Trans., 9, 101-111, (1966)
82. Rowe, C. N., “Role of Additive Adsorption in the Mitigation of Wear, ” ASLE Trans., 13, 179-188, (1970)
83. Thompson, R. A. and Weichbrodt, B., “Gear Diagnostics and Wear Detection, ” ASME Preprint 69-VIBR-10, (1969)
84. DeWinter, A., and Blok, H., “Fling-Off Cooling of Gear Teeth, ” Trans. ASME, Jour. Eng. for Industry, 96B, 60-70, (1974)
85. Heijnigen, G. J. J., and Blok, H., “Continuous As Against Intermittent Fling-Off Cooling, ” Trans. ASME, Jour. Lub. Tech., 96F, 529-538, (1974)
86. Blok, H., “The Postulate About the Constancy of Scoring Temperature, ” Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA Spec. Publ. 237, 153-248, (1970)
87. Bathgate, J., Kendall, R. B., and Moorehouse, P., “Thermal Aspects of Gear Lubrication, ” Wear, 15, 117-129, (1970)
88. Mudd, G. C., “A Numerical Means of Predicting the Fatique Performances of Nitride-Hardened Gears, ” Proc. I. Mech. E., 184, Pt. 3.D (1970)
89. Young, I. T., “Gearing for Modern Marine Propulsion Systems, ” G. E. C. Journal of Science & Technology, 41, 143-155 (1974)