Rapidly solidified Al-Cr-Fe alloys for elevated-temperature applications: Mechanical properties and thermal stability (part 2)

International Journal of Non-Equiulibrium Processing

Volumn 10, Issue 1, 1997, Pages 59-82

  Ziani, Abdelouahab ^a   Michot, Gérard ^b  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^b CNRS   (France)

Author keywords

Hardening mechanisms; High temperature Al alloys; Ostwald ripening; Rapid solidification; Yield stress; Young's modulus

Indexed keywords

EID: 0012839929     PISSN: 13689290     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (46)

1. H. JONES, Rapid Solidification of Metals and Alloys, Monograph No. 8, The Institution of Metallurgists, London, U.K. (1982).
2. B. CANTOR, J.H. PEREPEZKO and B. PREDEL, in Science and Technology of the Undercooled Melt, NATO ASI Series, eds P.R. Sahm, H. Jones, C.M. Adam, Martinus Nijhoff Publishers, 1986.
3. A. LAWLEY in Atomization, Monograph in P/M series No. 1, eds A. Lawley, Metal Powder Industries Federation, Princeton, NJ, 1992.
4. A.J. YULE and J.J. DUKLEY, in Atomization of Melts for Powder Production and Spray Deposition, Oxford Series on Advanced Manufacturing, II, eds J.R. Crookall, M.C. Shaw, N.P. Suh, Clarendon Press, 1994.
5. G. THURSFIELD and M.J. STOWELL, J. Mater. Sci., 1974, 9, 1644.
6. L. KATGERMAN, H. KLEINJAN and P. de RUITER, PM Aerospace Materials, Conf. Proc., Berne 12-14 Nov 1984, Vol. 2, p. 37.
7. A. KAMIO, H. TEZUKA, S. SUZUKI and T. TAKAHASHI, J. Jap. Inst. Light Met., 1987, 37, 109.
8. Y.R. MAHAJAN, Y.W. KIM and F.H. FROES, J. Mater. Sci., 1987, 22, 202.
9. D.L. YANEY and W.D. NIX, Metall. Trans., 1987, 18A, 893.
10. R. AYER, L.M. ANGERS, R.R. MUELLER, J.C. SCANLON and C.F. KLEIN, Metall. Trans., 1988, 19A, 1645.
11. Y.M. KIM, in Dispersion Strengthened Aluminium Alloys, eds Y.M. KIM and W.M. GRIFFITH, The Metallurgical Society of AIME, Warrendale, PA., 1988, p. 157.
12. K.T. RAMAKRISHNAN, H.B. McSHANE and T. SHEPPARD, Int. J. Powder Metallurgy, 1995, 31, 4, 325.
13. D.J. SKINNER, ibid 11, p. 181.
14. D.J. SKINNER, M.S. ZEDALIS and P. OILMAN, Mater. Sci. Eng., 1989, A119, 81.
15. M.N. SRINIVASAN and S.D. LITTLE, Scripta. Metall., 1995, 32, 1153.
16. M.C. MacCONNELL and P.G. PARTRIDGE, Acta Metall., 1987, 35, 1973; ibid. 1981.
17. M.C. MacCONNELL and P.G. PARTRIDGE, Acta Metall., 1987, 35, 1973; ibid. 1981.
18. P. TSAKIROPOULOS, R.C. PRATT, H.H. JONES, J.E. RESTALL and R.W. GARDINER, Mater. Sci. Eng., 1988, 98, 143.
19. M. LIEBLICH, G. CARUANA, M. TORRALBA and H. JONES, Int. J. Rapid Solidn., 1995, 9, 45-61.
20. W.S. MILLER, I.R. HUGHES, I.G. PALMER, M.P. THOMAS, T.H. SAINI and J. WHITE, in High Strength Powder Aluminium Alloys-II, eds G.J. Hildeman, M.J.N. Koczak, The Metallurgical Society of AIME, Warrendale, PA, 1986, p. 311.
21. D.N. SPENCER, R. BROOK and H. JONES, Mater. Letters, 1994, 20, 125.
22. I.G. PALMER, M.P. THOMAS and G.J. MARSHALL, 217.
23. H. OCTOR and S. NAKA, Phil. Mag. Letters, 1989, 59, 229.
24. C. SOHN, K.K. BAE and S.J. KIM, J. Korean Inst. Met., 1988, 26, 369.
25. E.K. IOANNIDIS and T. SHEPPARD, J. Mater. Sci., 1990, 25, 3965.
26. R.L. BICKERDIKE, D. CLARK, J.N. EASTABROOK, G. HUGHES, W.N. MAIR, P.G. PARTRIDGE and H.C. RANSON, Int. J. Rapid Solidn, 1986, 2, 1.
27. A. ZIANI and G. MICHOT, Int. J. Rapid Solidn., 1996, 9, 305-321.
28. A. ZIANI, PhD Thesis (1992), Institut National Polytechnique de Lorraine, Nancy (France).
29. A. ZIANI, G. MICHOT, A. REDJAÏMIA, A. PIANELLI, C.Y. and A.M. ZAHRA, J. Mater. Sci., 1995, 30, 2921.
30. T. OHNISHI, Y. NAKATANI and K. OKABAYASHI, Bull. of the University of Osaka Prefecture, Series A, 24, (1975), 183.
31. M.J. COOPER, Acta Cryst., 13, (1960), 257.
32. C. ZHENHUA, W. YUN, Z. DUOSAN and J. XIANGYANG, Scripta Metall. Mater., 24, (1990), 599.
33. A. ZAIDI, PhD Thesis (1991), Institut National Polytechnique de Lorraine, Nancy (France).
34. M. CAMARGO S. de MACEDO, PhD Thesis (1995), Institut National Polytechnique de Lorraine, Nancy (France),
35. J.T. Al-HAIDARY, N.J. PETCH and E.R. de los RIOS, Phil. Mag. A, 1983, 47, 869-890.
36. T. YAMANE, Y. MASUGATA and K. HIRAO, J. Jap. Inst. Light Met., 1986, 36, 819-824.
37. T. TABATA and H. FUJITA, Acta Metall., 1973, 21, 355.
38. J.W. WYRZYKOWSKI and M.W. GRABSKI, Metall. Sci., 1983, 17, 445.
39. R. MAHMUDI, Scripta Metall. Mater., 1995, 32, 781-786.
40. D. DALOZ, PhD Thesis (1995), Institut National Polytechnique de Lorraine, Nancy (France).
41. B. AVITZUR, F1 of Eng. Ind., Trans. ASME, August 1967, p. 556.
42. C.M. ADAM, in Rapidly Solidified Amorphous and Crystalline Alloys, ed. B.H. KEAR, B.C. GIESSEN and M. COHEN, North-Holland. Amsterdam, 1982, pp. 411-422.
43. H. JONES, in Rapid Solidification Processing, Principles and Technologies, II, ed. R. MEHRABIAN, B.H. KEAR, M. COHEN, Claitor's Publishing Division, Baton-Rouge, 1980, pp. 306-316.
44. M. TORRALBA, B. SANCHEZ, M.C. CRISTINA, G. CARUANA and A. GARCIA ESCORIAL, in Proc. of Conf. on Advanced Aluminium and Magnesium Alloys, Amsterdam, The Netherlands, June 20-22, 1990, ASM Int. Publishing, Materials Park, Ohio, USA, pp. 393-400.
45. M. TORRALBA, B. SANCHEZ, M.C. CRISTINA, G. CARUANA and A. GARCIAESCORIAL, in Proc. of EUROMAT 91., Vol. 1, Advanced Processing, Cambridge, UK, 22-24 July 1991, Inst, of Materials, London, 1992, pp. 57-63.
46. G. MICHOT and G. CHAMPIER, in Proc. of Int. Conf. on PM Aerospace Materials 1991, November 4-6, Lausanne, Switzerland, MPR Publishing, Bellstone, U.K., paper 20, p. 8.