Sensitivity of stiffness and damping to various aspects of material and structural behavior

American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCA

Volumn 27, Issue , 2000, Pages 301-308

  Gibson, Ronald F ^a  

^a Wayne State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0012202788     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (44)

1. Adams, R. D., Flitcroft, J. E., Hancox, N. L., and Reynolds, W. N., 1973, "Effects of Shear Damage on the Torsional Behavior of Carbon Fibre Reinforced Plastics," Journal of Composite Materials, Vol. 7, pp. 68-75.
2. Browning, C. E., Husman, G. E., and Whitney, J. M., 1977, "Moisture Effects in Epoxy Matrix Composites," Composite Materials: Testing and Design, Fourth Conference, ASTM STP 617, American Society for Testing and Materials, Philadelphia, PA, pp. 481-496.
3. Cartian, I., and Gibson, R. F., 1998, "Improvement of Damping at the Micromechanical Level in Polymer Composites by the Use of Special Fiber Coatings," Journal of Vibration and Acoustics, Vol. 120, pp. 623-627.
4. Collister, J. and Gruskiewicz, M., 1982, "Dynamic Mechanical Characterization of Fiber Filled Unsaturated Polyester Composites," Short Fiber Reinforced Composite Materials, ASTM STP 772, American Society for Testing and Materials, Philadelphia, PA, pp. 183-207.
5. Crandall, S. H., 1962, On Scaling Laws for Material Damping, NASA TN-1467.
6. Dibenetto, A. T., Gauchel, J. V., Thomas, R. L., and Barlow, J. W., 1972, "Nondestructive Determination of Fatigue Damage Using Vibration Tests," Journal of Materials, Vol. 7, No. 2, pp. 211-215.
7. Foppl, O., 1936, "The Practical Importance of the Damping Capacity of Metals, Especially Steels," Journal of Iron and Steel Institute, Vol. 134, p. 393.
8. Gibson, R. F., and Plunkett, R., 1976, "Dynamic Mechanical Behavior of Fiber Reinforced Composites: Measurement and Analysis," Journal of Composite Materials, Vol. 10, pp. 325-341.
9. Gibson, R. F., Chaturvedi, S. K., and Sun, C. T., 1982a, "Complex Moduli of Aligned Discontinuous Fibre Reinforced Composites," Journal of Materials Science, Vol. 17, pp. 3499-3509.
10. Gibson, R. F., Yau, A., Mende, E. W., and Osborn, W. E., 1982b, "The Influence of Environmental Conditions on the Vibration Characteristics of Chopped Fiber Reinforced Composite Materials," Journal of Reinforced Plastics and Composites, Vol. 1, No. 3, pp. 225-241.
11. Gibson, R. F., Hwang, S. J., and Sheppard, C. H., 1990, "Characterization of Creep in Polymer Composites by the Use of Frequency-Time Transformations", Journal of Composite Materials, Vol. 24, pp. 441-453.
12. Gibson, R. F., and Kathawate, G. R., 1991, "Rapid Screening of Creep Susceptibiltiy of Structural Polymer Composites," Plastics and Plastic Composites: Material Properties, Past Performance and Process Simulation, ASME MD Vol. 29, V. J. Stokes, Editor, American Society of Mechanical Engineers, New York, pp. 161-171.
13. Gibson, R. F., 1994, Principles of Composite Material Mechanics, Mc Graw-Hill, New York.
14. th Annual ESD-SAE Advanced Composites Conference & Exposition (on CD).
15. Gibson, R F., 2000, "Modal Vibration Response Measurements for Characterization of Composite Materials and Structures, Composites Science and Technology, to appear.
16. Granato, A. V., 1965, "Internal Friction Studies of Dislocations," Internal Friction, Damping and Cyclic Plasticity, ASTM STP 378, American Society for Testing and Materials, Philadelphia, PA, pp. 88-108.
17. th Technical Conference, Dearborn, MI, pp. 479-489.
18. Hanstock, R. F., and Murray, A., 1947, "Damping Capacity and the Fatigue of Metals," Proc. Royal Physical Society, Vol. 59, p. 275.
19. Hognat, J., 1983, "Dynamic Thermomechanical Analysis of a Prepreg - Applications to Industrial Curing," Fibre Science and Technology, Vol. 18, No. 2, pp. 109-118.
20. Hwang, S. J., and Gibson, R. F., 1987, "Micromechanical Modeling of Damping in Discontinuous Fiber Composites Using a Strain Energy/Finite Element Approach," Journal of Engineering Materials and Technology, Vol. 109, pp. 47-52.
21. Hwang, S. J., and Gibson, R. F., 1992, "The Use of Strain Energy-Based Finite Element Techniques in the Analysis of Various Aspects of Damping in Composite Materials and Structures," Journal of Composite Materials, Vol. 26, No. 17, pp. 2585-2605.
22. Jones, R. L., and Fourney, M. E., 1987, "A Constitutive Relationship Between Crack Propagation and Specific Damping Capacity in 4340 Steel: Part 1," Proc. 1987 Spring Conference of the Society for Experimental Mechanics, Houston, Texas.
23. Lazan, B. J., 1968, Damping of Materials and Members in Structural Mechanics, Pergamon Press, Oxford, England.
24. Mantena, P. R., Place, T. A., and Gibson, R. F., 1985, "Characterization of Matrix Cracking in Composite Laminates by the Use of Damping Capacity Measurements," Proc. Symposium on the Role of Surfaces and Interfaces in Material Damping, Toronto, Canada, ASM International.
25. Mantena, P. R., Gibson, R. F., Place, T. A., Srivatsan, T. S., and Sudarshan, T. S., 1988, "Debond and Failure Characteristics of a Double Lap Adhesively Bonded Joint," Journal of Adhession Science and Technology, Vol. 2, No. 3, pp. 189-202.
26. Mason, W. P., 1956, "Physical Acoustics and the Properties of Solids," Journal of the Acoustical Society of America, Vol. 28, No. 6, p. 1204.
27. Nelson, D. J., and Hancock, J.W., 1978, "Interfacial Slip and Damping in Fibre Composites," Journal of Materials Science, Vol. 13, pp. 2429-2440.
28. Nielsen, L. E., and Landel, R. F., 1994, Mechanical Properties of Polymers and Composites, Second Edition, Marcel Dekker, Inc., New York.
29. Nowick, A. S., and Berry, B. S., 1972, Anelastic Relaxation in Crystalline Solids, Academic Press, New York.
30. Pant, R., and Gibson, R. F., 1996, "Analysis and Testing of Dynamic Micromechanical Behavior of Composite Materials at Elevated Temperatures," Journal of Engineering Materials and Technology, Vol. 118, pp. 554-560.
31. Plunkett, R., 1980, "Damping in Fiber Reinforced Composites at High Strain," Journal of Composite Materials (Supplement), Vol. 14, pp. 109-117.
32. Pye, C. J., and Adams, R. D., 1982, "A Vibration Method for the Determination of Stress Intensity Factors," Engineering Fracture Mechanics, Vol. 16, No. 3, pp. 433-445.
33. Rehfield, L. W., Briley, R. P., and Putter, S., 1982, "Dynamic Tests of Graphite/Epoxy Composites in Extreme Environments," Composites for Extreme Environments, ASTM STP 768, American Society for Testing and Materials, Philadelphia, PA.
34. Schultz, A. B., and Warwick, D. N., 1971, "Vibration Response: A Nondestructive Test for Fatigue Crack Damage in Filament Reinforced Composites," Journal of Composite Materials, Vol. 5, pp. 394-404.
35. Suarez, S. A., Gibson, R. F., Sun, C. T., and Chaturvedi, S. K., 1986, "The Influence of Fiber Length and Fiber Orientation on Damping and Stiffness of Polymer Composites," Experimental Mechanics, Vol. 26, No 2, pp. 175-184.
36. Torvik, P. J., and Bourne, C., 1980, "Material Damping as a Means of Quantifying Fatigue Damage in Composites," Shock and Vibration Bulletin, Proc. 50, Part 4, U. S. Naval Research Laboratory, pp. 1-11.
37. Tracy, J. J., Dimas, D. J., and Pardoen, G. C., 1985, "The Effect of Impact Damage on the Dynamic Properties of Laminated Composite Plates," Proc. Fifth International Conference on Composite Materials, ICCM-V, pp. 111-125.
38. Ungar, E. E., and Kerwin, E. M., Jr., 1962, "Loss Factors of Viscoelastic Systems in Terms of Strain Energy," Journal of the Acoustical Society of America, Vol. 34, No. 2, pp 954-958.
39. th Annual ESD Advanced Composites Conference & Exposition, Dearborn, MI, pp. 331-350.
40. Yang, S., Gibson, R. F., Crosbie, G. M., and Allor, R. M., 1997, "Thermal Cycling Effects on Dynamic Mechanical Properties and Crystallographic Structures of Silicon Nitride-Based Structural Ceramics," Journal of Engineering for Gas Turbines and Power, Vol. 119, No 2, pp. 279-284.
41. Yang, S., Gibson, R. F., Li, D., and Hecht, R. L., 1998a, "Damping and Microstructures of Brake Rotor Materials," International Journal of Materials and Product Technology, Vol. 13, Nos. 3-6, pp. 155-166.
42. Yang, S., Gibson, R. F., Gu, L., and Chen, W.-H., 1998b, "Modal Parameter Evaluation of Degraded Adhesively Bonded Composite Beams," Composite Structures, Vol. 43, pp. 79-91.
43. Zener, C., 1948, Elasticity and Anelasticity of Metals, The University of Chicago Press, Chicago.
44. Zhao, H., and Gibson, R. F., 1996, "Correlations Between Mode II Fracture Toughness and Nondestructive Damping Measurements in Laminated Composite Materials," Materials Evaluation, pp. 1154-1160.