A survey of heat transfer in separated and reattached flows

Applied Mechanics Reviews

Volumn 53, Issue 8, 2000, Pages 219-235

  Ota, Terukazu ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0011850258     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3097351     Document Type: Article

References (268)

1. Aihara T (1992), Heat-transfer control; Principal focus on Japanese research, ApplMech Rev 109, 129-153.
2. Aung W (1983), Separated forced convection, Proc of ASME-JSME Thermal Eng Conf 2,499-515.
3. Ballio F, Bettoni C, and Franzetti S (1988), A survey of time-averaged characteristics of laminar and turbulent horseshoe vortices, J Fluids Eng 120, 233-242.
4. Chilcott RE (1967), A review of separated and reattaching flows with heat transfer, bit J Heat Mass Transfer 10, 783-797.
5. Eaton JK and Johnston JP (1981), A review of research on subsonic turbulent flow reattachment, AIAAJ 19,1093-1100.
6. Fletcher LS, Briggs DG, and Page RH (1974), Heat transfer in separated and reattached flows: An annotated review, Israel J Tech, 236-261.
7. Hutton AG and Szczepura RT (1987), Turbulent flow and heat transfer in a sudden pipe expansion: A comparison of current models of turbulence, CEGB Rept TPRD/B/0296/R87.
8. Kiya M (1989), Turbulence structure of separated-and-reattaching flows, Trans JSME 55B, 559-564.
9. Launder BE (1988), On the computation of convective heat transfer in complex turbulent flows, J Heat Transfer 110, 1112-1128.
10. Launder BE (1994), On the computation of convective heat transfer in complex turbulent flows: Physical issues, Heat Transfer 1994, Lisbon, l.L.2.
11. Merzkirch W, Page RH, and Fletcher LS (1988), A survey of heat transfer in compressible separated and reattached flows, AIAA J 26,144-150.
12. Patankar SV (1988), Recent developments in computational heat transfer, J Heat Transfer 110, 1037-1045.
13. Roshko A and Lau JC (1965), Some observations on transition and reattachment of a free shear layer in incompressible flow, Proc 1965 Heat Transfer &Fluid Mech Inst, 157-167.
14. Simpson RL (1989), Turbulent boundary-layer separation, Ann Rev Fluid Mech 21,205-234.
15. Abbott DE and Kline SJ (1962), Experimental investigation of subsonic turbulent flow over single and double-backward facing steps, J Basic Eng 84, 317-325.
16. Adams EW and Johnston JP (1988a), Effects of the separating shear layer on the reattachment flow structure. Part 1: Pressure and turbulence quantities, Exp in Fluids 6, 400-408.
17. Adams EW and Johnston JP (1988b), Effects of the separating shear layer on the reattachment flow structure. Part 2: Reattachment length and wall shear stress, Exp in Fluids 6, 493-499.
18. Adams E W and Johnston, J P (1988c), Flow structure in the near-wall zone of a turbulent separated flow, AIAA J 26, 932-939.
19. Armaly BF, Durst F, Pereira JCF, and Schonung B (1983), Experimental and theoretical investigation of backward-facing step flow, J Fluid Mech 127,473-496.
20. Badri Narayanan MA, Khadgi YN, and Viswanath PR (1974), Similarities in pressure distribution in separated flow behind backward-facing steps, Aeronaut Quart 25, 305-312.
21. Bandyopadhyay PR (1991), Instabilities and large structures in reattaching boundary layers, AlAA J 29, 1149-1155.
22. Benedict LH and Gould RD (1997a), The transport of turbulent kinetic energy in the flow behind a backwards-facing step, ASME FEDSM97-3279.
23. Benedict LH and Gould RD (1997b), High-resolution, unbiased LDV measurements in the flow behind a backwards-facing step, ASME FEDSM97-3280.
24. Bradshaw P and Wong FYF (1972), The reattachment and relaxation of a turbulent shear layer, J Fluid Mech 52, 113-135.
25. Chandrsuda C and Bradshaw P (1981), Turbulence structure of a reattaching mixing layer, J Fluid Mech 110, 171-194.
26. Driver DM, Seegmiller HL, and Marvin JG (1987), Time-dependent behavior of a reattaching shear layer, AlAA J 25, 914-919.
27. Eaton JK and Johnston JP (1982), Low frequency un steadiness of a reattaching turbulent shear layer, Turbulent Shear Flow 3, 162-170.
28. Etheridge DW and Kemp JP (1978), Measurements of turbulent flow downstream of a rearward-facing step, J Fluid Mech 86, 545-566.
29. Goldstein RJ, Eriksen VL, Olson RM, and Eckeit ERG (1970), Laminar separation, reattachment, and transition of the flow over a downward-facing step, ASME J Basic Eng 92, 732-741.
30. Govinda Ram HS and Arakeri VH (1990), Studies on unsteady pressure fields in the region of separating and reattaching flows, J Fluids Eng 112,402-408.
31. Isomoto K and Honami S (1989), The effect of inlet turbulence intensity on the reattachment process over a backward-facing step, J Fluids Eng 111, 87-92.
32. Kim J, Kline SJ, and Johnston JP (1980), Investigation of a reattaching turbulent shear layer: Flow over a backward-facing step, J Fluids Eng 102, 302-308.
33. Moss WD and Baker S (1980), Re-circulating flows associated with two dimensional steps, Aeronaut Quart 31, 151-172.
34. Nezu I and Nakagawa H (1989), Turbulent structure of backward-facing step flow and coherent vortex shedding from reattachment in open-chattel flows, Turbulent Shear Flows 6, 313-337.
35. Serpa JM, Lessmann RC, and Hagist WM (1987), Turbulent separated and reattached flow over a curved surface, J Fluids Eng 109,403-409.
36. Tani I, luchi M, and Komoda H (1961), Experimental investigation of flow separation associated with a step or a groove, Aeronaut Res Inst, Univ Tokyo, Rep.364.
37. Troutt TR, Scheelke B, and Norman TR (1984), Organized structures in a reattaching separated flow field, J Fluid Mech 143, 413-427.
38. Westphal RV and Johnston JP (1984), Effect of initial conditions on turbulent reattachment downstream of a backward-facing step, AlAA J 22, 1727-1732.
39. Westphal RV, Eaton JK, and Johnston JP (1981), A new probe for measurement of velocity and wall shear stress in unsteady, reversing flow, J Fluids Eng 103, 478-482.
40. Yang J-T, Tsai B-B, and Tsai G-L (1994), Separated-reattaching flow over a backstep with uniform normal mass bleed, J Fluids Eng 116, 29-35.
41. Abe K, Kondoh T, and Nagano Y (1994a), A new turbulence model for predicting fluid flow and heat transfer in separating and reattaching flows -I. Flow field calculations, Int J Heat Mass Transfer 37, 139-151.
42. Abe K, Nagano Y, and Kondoh T (1994b), Two-equation heat transfer model for turbulent flows with separation and reattachment, Trans JSME 60B, 1743-1750.
43. Achenbach E (1990), Mass transfer downstream a backward or a forward-facing step, Heat Transfer 1990, 16TR4, 305-310.
44. Aung W (1983), An experimental study of laminar heat transfer downstream of back steps, J Heat Transfer 105, 823-829.
45. Aung W and Goldstein RJ (1970), Temperature distribution and heat transfer in a transitional separated shear layer, Heat Transfer 1970, 2, FCT.5.
46. Aung W and Goldstein RJ (1972), Heat transfer in turbulent separated flow downstream of a rearward-facing step, Israel J Tech 10, 35-41.
47. Aung W, Baron A, and Tsou F-K (1985), Wall independency and effect of initial shear-layer thickness in separated flow and heat transfer, Int J Heat Mass Transfer 28, 1757-1771.
48. Bortolus M and Giovannini A (1995), Numerical prediction of wall heat transfer in complex turbulent flow. Turbulence, Heat Mass Transfer 1, 228-232.
49. Cho HH and Goldstein RJ (1994), An improved low-Reynolds-number k-E turbulence model for re circulating flows, Int J Heat Mass Transfer 37, 1495-1508.
50. Dutta S and Achaiya S (1993), Heat transfer and flow past a back step with the nonlinear k-e turbulence model and the modified k-e turbulence model, Numer Heat Transfer A23, 281 -301.
51. Heyerichs K and Pollard A (1996), Heat transfer in separated and impinging turbulent flows, Int J Heat Mass Transfer 39, 2385-2400.
52. Iwai H, Nakabe K, and Suzuki K (2000), Flow and heat transfer characteristics of backward-facing step laminar flow in a rectangular duct, Int J Heat Mass Transfer 43, 457-471.
53. Jovic S (1998), Momentum and heat transfer measurements in the separated region downstream of a step, Heat Mass Transfer 1, 264-270.
54. Kawamura T, Tanaka S, Mabuchi I, and Kumada M (1987-88), Temporal and spatial characteristics of heat transfer at the reattachment region of a backward-facing step, Exp Heat Transfer 1, 299-313.
55. Kawamura T, Yamamori A, Mimatsu J, and Kumada M (1991), Time and spatial characteristics of heat transfer at the reattachment region of a two-dimensional backward-facing step, Proc ASME-JSME Thermal Eng Confi, 197-204.
56. Kondoh T and Nagano, Y (1988), Computational study of laminar heat transfer behind backward-facing steps, Trans JSME 54B, 1760-1767.
57. Kondoh T and Nagano Y (1989), Computational study of separating and reattaching flows behind a backward-facing step (Simulation of a large-scale flow structure), Trans JSME 55B, 1016-1021.
58. Kondoh T, Nagano Y, and Tsuji T (1993), Computational study of laminar heat transfer downstream of a backward-facing step, Int J Heat Mass Transfer 36,577-591.
59. Kottke V (1982), Heat, mass and momentum transfer in separated flows, Chemie ltig Technik 54, 86-94.
60. Kudo K, Taniguchi H, Kobayashi T, and Fukuchi T (1991), Numerical analyses on velocity and temperature fields in the re circulating zone behind a backward-facing step (the influence of Reynolds number), Trans JSME 57B, 1071-1076.
61. Kumar SGR, Narayama PA A, Seetharamu KN, and Ramaswamy B (1989), Laminar flow and heat transfer over a two-dimensional triangular step, Int J Numer Methods Fluids 9, 1165-1177.
62. Mabuchi I, Murata T, and Kumada M (1986), Effect of free-stream turbulence on heat transfer characteristics in the reattachment region on the bottom surface of a backward-facing step (For different angles of separation), Trans JSME 52B, 2619-2625.
63. Mori Y, Uchida Y, and Sakai K (1986), A study of the time and spatial micro-structure of heat transfer performance near the reattaching point of separated flows, Trans JSME 52B, 3353-3361.
64. Nagano Y and Shimada M (1996), Development of a two-equation heat transfer model based on direct simulations of turbulent flows with different prandtl numbers, Phys Fluids 8, 3379-3402.
65. Ota T and Sugawara Y (1994), Turbulent heat transfer in the separated and reattached flow around an inclined downward step, Heat Transfer 1994, 4, 113-118.
66. Ota T, Nakamura N, and Hirayama T (1995), Turbulent separated and reattached flow around an inclined downward step, Heat Mass Transfer 1, 286-293.
67. Oyakawa K, Koike T, and Mabuchi I (1993), Studies of heat transfer control by using jet discharge at reattachment region downstream of a backward-facing step, Trans JSME 59B, 543-549.
68. Oyakawa K, Saitoh T, Teruya I, and Mabuchi I (1995), Heat transfer enhancement using slat at reattachment region downstream of backward-facing step, Trans JSME 61B, 4426-4431.
69. Oyakawa K, Taira T, and Yamazato E (1994), Studies of heat transfer control by jet discharge at reattachment region downstream of a backward-facing step, Trans JSME 60B, 248-254.
70. Oyakawa K, Teruya I, Senaha I, Yaga M, and Mabuchi I (1996), Evaluation of thermal performance on heat transfer enhancement by passive and active methods at downstream region of backward-facing step, Trans JSME 62B, 1104-1110.
71. Rhee GH and Sung HJ (1996), A nonlinear low-Reynolds-number k-E model for turbulent separated and reattaching flows - II. Thermal field computations, Int J Heat Mass Transfer 39, 3465-3474.
72. Scherer V and Wittig S (1991), The influence of the recirculation region: a comparison of the convective heat transfer downstream of a backward-facing step and behind a jet in a cross flow, J Eng Gas Turbines and Power 113, 126-134.
73. Seban R A (1964), Heat transfer to the turbulent separated flow of air downstream of a step in the surface of a plate, J Heat Transfer 86,259-264.
74. Seban RA, Emery A, and Levy A (1959), Heat transfer to separated and reattached subsonic turbulent flows obtained downstream of a surface step, J Aerospace Sci. 26, 809-814.
75. Shishov EV, Roganov PS, Grabamik SI, and Zabolotsky VP (1988), Heat transfer in the re circulating region funned by a backward-facing step, Int J Heat Mass Transfer 31, 1557-1562.
76. Sparrow EM and Chuck W (1987), PC solutions for heat transfer and fluid flow downstream of an abrupt, asymmetric enlargement in a channel, Numer Heat Transfer 12, 19-40.
77. Suzuki H, Suzuki K, Kida S, and Nakamae T (1991), Heat transfer augmentation in the region downstream of a backward-facing step (Effects of a cylinder mounted near the top corner of the step), Trans JSME S7B, 1410-1415.
78. Tsou FK, Chen S-J, and Aung W (1991), Starting flow and heat transfer downstream of a backward-facing step, J Heal Transfer 113, 583-589.
79. Valencia A and Hinojosa L (1997), Numerical solutions of pulsating flow and heat transfer characteristics in a channel with a backward-facing step, Heat Mass Transfer 32, 143-148.
80. Vogel JC and Eaton JK (1985), Combined heat transfer and fluid dynamic measurements downstream of a backward-facing step, J Heat Transfer 107,922-929.
81. Yang J-T and Tsai C-H (1996), High temperature heat transfer of separated flow over a sudden-expansion with base mass injection, Int J Heat Mass Transfer 39, 2293-2301.
82. Yang Y-T and Kuo C-L (1997), Numerical study of a backward-facing step with uniform normal mass bleed, Int J Heat Mass Transfer 40, 1677-1686.
83. Yin Y, Nagano Y, and Tagawa M (1992), Numerical prediction of turbulent heat transfer in high-Prandtl-number fluids, Trans JSME 58B, 2254-2260.
84. Abbott DE and Kline SJ (1962), Experimental investigation of subsonic turbulent flow over single and double backward facing steps, ASME J Basic Eng 84, 317-325.
85. Acrivos A and Schrader M L (1982), Steady flow in a sudden expansion at high Reynolds numbers, Phys Fluids 25, 923-930.
86. Allebom N, Nandakumar K, Rasziiiier H, and Durst F (1997), Further contributions on the two-dimensional flow in a sudden expansion, J Fluid Mech 330, 169-188.
87. Battaglia F, Tavener SJ, Kulkami AK, and Merkle CL (1997), Bifurcation of low Reynolds number flows in symmetric channels, AIAA J 35, 99-105.
88. Burakov BG and Shan’gin NN (1988), Calculation of separated asymmetric viscous flows in symmetrical channels, Heat Transfer - Soviet Res 20, 837-846.
89. Cherdron W, Durst F, and Whitelaw JH (1978), Asymmetric flows and instabilities in symmetric ducts with sudden expansions, J Fluid Mech 84, 13-31.
90. De Zilwa SR, Sivasegaram S, and Whitelaw JH (1997), Active control of isothermal and combusting flows in plane sudden-expansions, Proc Transport Phenomena in Thermal Sci and Process Eng, 325-330.
91. Drikakis D (1997), Bifurcation phenomena in incompressible sudden expansion flows, Phys Fluids 9, 76-87.
92. Durst F, Melling A, and Whitelaw JH (1974), Low Reynolds number flow over a plane symmetric sudden expansion, J Fluid Mech 64,111-128.
93. Durst F, Pereira JCF, and Tropea C (1993), The plane symmetric sudden-expansion flow at low Reynolds numbers, J Fluid Mech 248,567-581.
94. Feam RM, Mullin T, and Cliffe KA (1990), Nonlinear flow phenomena in a symmetric sudden expansion, J Fluid Mech 211, 595-608.
95. Filetti EG and Kays WM (1967), Heat transfer in separated, reattached and redevelopment regions behind a double step at entrance to a flat duct, J Heat Transfer 89, 163-168.
96. Foumeny EA, Ingham DB, and Walker A J (1996), Bifurcations of incompressible flow through plane symmetric channel expansions, Comput Fluids 25, 335-351.
97. Giaquinta AR (1977), Numerical modeling of unsteady, separated viscous flow, J Fluids Eng 99, 657-665.
98. Korobko VI, Malaya EM, and Shashmin V K (1979), Aerodynamics of flow in a plane duct with sudden expansion, J Eng Phys 35, 960-964.
99. Kwon OK, Pletcher RH, and Lewis JP (1984), Prediction of sudden expansion flows using the boundary-layer equations, J Fluids Eng 106, 285-291.
100. Lewis JP and Pletcher RH (1986), Limitations of the boundary-layer equations for predicting laminar symmetric sudden expansion flows, J Fluids Eng 108, 208-213.
101. Macagno EO and Hung T-K (1967), Pressure, Bernoulli sum, and momentum and energy relations in a laminar zone of separation, Phys Fluids 10,78-82.
102. Milos FS and Acrivos A (1986), Steady flow past sudden expansions at large Reynolds number. Part 1: Boundary layer solutions, Phys Fluids 29, 1353-1359.
103. Milos FS and Acrivos A (1987), Steady flow past sudden expansions at large Reynolds number. Part II: Navier-Stokes solutions for the cascade expansion, Phys Fluids 30, 7-18.
104. Mitsunaga S and Hirose T (1976), A contribution to the Canada Effect, Trans JSME 42, 3899-3905.
105. Mitsunaga S, Takagishi K, Endo T, and Hirose T (1978), Laminar flowpat-tems in a two dimensional conduit with an abrupt expansion and influence of temperature on them, Trans JSME 44, 2734-2740.
106. Ota T and Hata T (1992), Numerical analysis of laminar heat transfer and flow in a plane enlarged channel, Proc 2nd JSME-KSME Thermal Eng Confl, 63-68.
107. Ota T and Toda Y (1990), Prediction of laminar heat transfer and flow in plane enlarged channels, Heat Transfer 1990, 6, 20MSC11, 305-311.
108. Ota T, Yanaoka H, and Hata T (1994), Numerical analysis of laminar flow and heat transfer in a two-dimensional symmetrically enlarged channel, Trans JSME 60B, 3930-3936.
109. Scott PS and Mirza FA (1986), A finite element analysis of laminar flows through planar and ax symmetric abrupt expansions, Comput Fluids 14, 423-432.
110. Seki N, Fukusako S, and Hirata T (1976a), Effect of stall length on heat transfer in reattached region behind a double step at entrance to an enlarged flat duct, Int J Heat Mass Transfer 19, 700-702.
111. Seki N, Fukusako S, and Hirata T (1976b), Turbulent fluctuations and heat transfer for separated flow associated with a double step at entrance to an enlarged flat duct, J Heat Transfer 98, 588-593.
112. Seki N, Fukusako S, and Hirata T (1978), Laminar heat transfer downstream of a sudden enlargement of a duct, Bull JSME 21, 254-257.
113. Smyth R (1979), Turbulent flow over a plane symmetric sudden expansion, J Fluids Eng 101, 348-353.
114. Sobey IJ (1985), Observation of waves during oscillatory channel flow, J Fluid Mech 151, 395-426.
115. Sobey IJ and Drazin PG (1986), Bifurcations of two-dimensional channel flows, J Fluid Mech 171,263-287.
116. Ahmed SA (1998), An isothermal experimental investigation of turbulence transport through an abiupt ax symmetric expansion, Proc Inst Mech Engi-s 212, 45-55.
117. Amano R S (1983), A study of turbulent flow downstream of an abrupt pipe expansion, AIAA J 21, 1400-1405.
118. Amano RS, Jensen MK, and Goel P (1983), A numerical and experimental investigation of turbulent heat transport downstream from an abrupt pipe expansion, J Heat Transfer 105, 862-869.
119. Back LH and Roschke EJ (1972), Shear-layer flow regimes and wave instabilities and reattachment lengths downstream of an abrupt circular channel expansion, J Appl Mech 39, 677-681.
120. Bauglin JW, Hoffman MA, Launder BE, Lee D, and Yap C (1989), Heat transfer, temperature, and velocity measurements downstream of an abrupt expansion in a circular tube at a uniform wall temperature, J Heat Transfer 111, 870-876.
121. Baughn ÍW, Hoffman MA, Lee D, and Yap C (1987a), Turbulent velocity and temperature profiles downstream of an abrupt expansion in a circular duct with a constant wall temperature, Proc ASME-JSME Thermal Eng Confl, 449-454.
122. Baughn JW, Hoffman MA, Takahashi RK, and Launder BE (1984), Local heat transfer downstream of an abrupt expansion in a circular channel with constant wall heat flux, J Heat Transfer 106, 789-796.
123. Baughn JW, Hoffman MA, Takahashi RK, and Lee D (1987b), Heat transfer downstream of an abiupt expansion in the transition Reynolds number regime, J Heat Transfer 109, 37-42.
124. Baughn JW, Takahashi RK, Hoffman MA, and McKillop AA (1985), Local heat transfer measurements using an electrically heated thin gold-coated plastic sheet, J Heat Transfer 107, 953-959.
125. Boelter LMK, Young G, and Iversen HW (1948), An investigation of Aircraft Heaters XXVII - Distribution of heat transfer rate in the entrance section of a circular tube, NACA-TN-1451.
126. Chang KC, Chen CS, and Uang Cl (1991), A hybrid k-e turbulence model of re circulating flow, Int J Numer Meth Fluids 12, 369-382.
127. Chang KC, Hsieh WD, and Chen CS (1995), A modified low-Reynolds-number turbulence model applicable to re circulating flow in pipe expansion, J Fluids Eng 117, 417-423.
128. Chieng CC and Launder BE (1980), On the calculation of turbulent heat transport downstream from an abrupt pipe expansion, Numer Heat Transferi, 189-207.
129. Chung BTF and Jia S (1995), A turbulent near-wall model on convective heat transfer from an abrupt expansion tube, Heat Mass Transfer 31, 33-40.
130. Cole DR and Glauser MN (1998), Applications of stochastic estimation in the ax symmetric sudden expansion, Phys Fluids 10, 2941-2949.
131. Devenport WJ and Sutton EP (1991), Near-wall behavior of separated and reattaching flows, AIAA J 29, 25-31.
132. Ede AJ, Hislop CI, and Morris R (1956), Effect of the local heat transfer coefficient in a pipe of an abiupt disturbance of the fluid flow: abiupt convergence and divergence of diameter ratio 2:1, Proc Inst Mech Engrs 170, 1113-1130.
133. Fletcher DF, Masked SJ, and Patrick MA (1985), Heat and mass transfer computations for laminar flow in an ax symmetric sudden expansion, Comput Fluids 13, 207-221.
134. Gooray AM, Watkins CB, and Aung W (1985), Turbulent heat transfer computations for rearward-facing steps and sudden pipe expansions, J Heat Transfer 107, 70-76.
135. Gould RD, Stevenson WH, and Thompson HD (1990), Investigation of turbulent transport in an ax symmetric sudden expansion, AIAA J 28, 276-283.
136. Guo Z-Y, Li D-Y, and Liang X-G (1996), Thermal effect on the recirculation zone in sudden-expansion gas flows, Int J Heat Mass Transfer 39, 2619-2624.
137. Haraguchi S (1992), Measurement of velocity and turbulence distribution after reattachment in an abruptly expanding circular duct (Case of fully developed pipe flow induction), Trans JSME 58B, 1130-1135.
138. Hsieh WD and Chang KC (1996), Calculation of wail heat transfer in pipe-expansion turbulent flows, Int J Heat Mass Transfer 39, 3813-3822.
139. Iguchi M and Sugiyama T (1988), Study on the flow near the wall of the larger pipe, downstream of a sudden expansion, Trans JSME 54B, 3010-3015.
140. Johnson RW and Launder BE (1982), Discussion of “On the calculation of turbulent heat transport downstream from an abrupt pipe expansion,” Numer Heat Transfer 5, 493-496.
141. Koram KK and Sparrow EM (1978), Turbulent heat transfer downstream of an un symmetric blockage in a tube, J Heat Transfer 100, 588-594.
142. Krall KM and Spanow EM (1966), Turbulent heat transfer in the separated, reattachment, and redevelopment regions of a circular tube, J Heat Transfer 88, 131-136.
143. Macagno EO and Hung T-K (1967), Computational and experimental study of a captive annular eddy, J Fluid Mech 28, 43-64.
144. Papadopoulos G, Lekakis I, and Durst F (1997), Reynolds number asymptotic covariance for turbulent pipe flow past a sudden expansion, ASME FEDSM97-2222.
145. Runchal AK (1971), Mass transfer investigation in turbulent flow downstream of sudden enlargement of a circular pipe for veiy high Schmidt numbers, Int J Heat Mass Transfer 14, 781-792.
146. Singh RK, Paquin S, Boy J-M, Deslandes A, and Tavoularis S (1997), Numerical simulation of laminar palatial flow in axisyinmetric sudden expansions, ASME FEDSM9 3-7 320.
147. Suzuki K, Kang Y-M, Sugimoto T, and Sato T (1982), Heat transfer in the downstream region of an orifice in a tube, Trans JSME 48B, 132-140.
148. Tavoularis S and Singh RK (1999), Vortex detachment and reverse flow in pulsatile laminar flow through ax symmetric sudden expansions, J Fluids Eng 121,574-579.
149. Zemanick PP and Dougall RS (1970), Local heat transfer downstream of abrupt circular channel expansion, J Heat Transfer 92, 53-60.
150. Castro IP and Epik E (1998), Boundaiy layer development after a separated region, J Fluid Mech 374, 91-116.
151. Cherry NJ, Hillier R, and Latour MEMP (1983), The unsteady structure of two-dimensional separated-and-reattaching flows, J Wind Eng Indust Aerodyn 11, 95-105.
152. Cherry NJ, Hillier R, and Latour MEMP (1984), Unsteady measurements in a separated and reattaching flow, J Fluid Mech 144, 13-46.
153. Djilali N and Gartshore I (1991a), Applications of pulsed wire anemometry at the Univ of British Columbia, Exp Heal Transfer, Fluid Mech and Thermodyn 1991, 383-388.
154. Djilali N and Gartshore IS (1991b), Turbulent flow around a bluff rectangular plate. Part I: Experimental investigation, J Fluids Eng 113,51 -59.
155. Djilali N and Gartshore IS (1992), Effect of leading-edge geometry on a turbulent separation bubble, AIAA J 30, 559-561.
156. Djilali N, Gartshore IS, and Salcudean M (1991), Turbulent flow around a bluff rectangular plate. Part II: Numerical predictions, J Fluids Eng 113, 60-67.
157. Hillier R and Cherry NJ (1981), The effects of stream turbulence on separation bubbles, J Wind Eng Indust Aero dyn 8, 49-58.
158. Hourigan, K, Welsh LW, Cooper PI, Thompson MC, and Welsh MC (1987), Organized vortex and thermal structures in a forced convection reattaching separated flow, Proc ASME-JSME Thermal Eng Conf 5, 195-202.
159. Kiya M and Sasaki K (1983), Structure of a turbulent separation bubble, J Fluid Mech 137,83-1 13.
160. Kiya M and Sasaki K (1985), Structure of large-scale vortices and unsteady reverse flow in the reattaching zone of a turbulent separation bubble, J Fluid Mech 154, 463-491.
161. Kiya M, Sasaki K, and Arie M (1982), Discrete-vortex simulation of a turbulent separation bubble, J Fluid Mech 120, 219-244.
162. Lane JC and Loehrke RI (1980), Leading edge separation from a blunt plate at low Reynolds number, J Fluids Eng 102, 494-496.
163. Li X and Djilali N (1995), On the scaling of separation bubbles, JSME Int J 38B, 541-548.
164. Ota T (1974), A separated and reattached flow on a blunt flat plate in a tunnel, Quart J Mech Appl Math 27, 379-386.
165. Ota T (1983), Nose shape effects on turbulence in the separated and reattached flow over blunt flat plates, Zeit Flugwiss Weltraumforsch. 7, 316-321.
166. Ota T and Itasaka M (1976), A separated and reattached flow on a blunt flat plate, J Fluids Eng 98, 79-86.
167. Ota T and Kaneko E (1983), A note on development of a reattached turbulent flow over a blunt flat plate, Bull JSME 26, 1563-1566.
168. Ota T and Kon N (1974), Heat transfer in the separated and reattached flow on a blunt flat plate, J Heat Transfer 96,459-462.
169. Ota T and Motegi H (1983), Measurements of spatial correlations and autocorrelations in separated and reattached flow over a blunt flat plate, J Wind Eng Indust Aerodyn 12, 297-312.
170. Ota T and Narita M (1978), Turbulence measurements in a separated and reattached flow over a blunt flat plate, J Fluids Eng 100, 224-228.
171. Ota T, Asano Y and Okawa J (1981), Reattaclunent length and transition of the separated flow over blunt flat plates, Bull JSME 24, 941-947.
172. Parker R and Welsh MC (1983), Effects of sound on flow separation from blunt flat plates, Int J Heat Fluid Flow 4, 113-128.
173. Saathoff PJ and Melbourne WH (1989), The generation of peak pressures in separated/reattaching flows, J Wind Eng Indust Aerodyn 32, 121 -134.
174. Sam RG, Lessmann RC, and Test FL (1979), An experimental study of flow over a rectangular body, J Fluids Eng 101,443-448.
175. Sasaki K and Kiya M (1984), Unsteady reverse-flow characteristics and a possible mechanism of high heat-transfer rate in a turbulent separation bubble, Trans JSME Sm, 2549-2554.
176. Sasaki K and Kiya M (1991), Three-dimensional vortex structure in a leading-edge separation bubble at moderate Reynolds numbers, J Fluids Eng 113,405-410.
177. Sung HJ, Chung YM, and Kiya M (1996), Vortex simulation of leading-edge separation bubble with local forcing, Fluid Dynamics Res 18, 99115.
178. Tafti DK and Vanka SP (1991a), A numerical study of flow separation and reattachment on a blunt plate, Phys Fluids A3, 1749-1759.
179. Tafti DK and Vanka SP (1991b) A three-dimensional numerical study of flow separation and reattachment on a blunt plate, Phys Fluids A3, 2887-2909.
180. Welch LW (1988), The determination of ensemble average flow velocities of perturbed, separating flow around a bluff body using LDA, Exp Heat Transfer, Fluid Mech, and Thermo dyn 476-481.
181. Welsh MC, Hourigan K, Welch LW, Downie RJ, Thompson MC, and Stokes AN (1988), Acoustics and experimental methods: The influence of sound on flow and heat transfer, Exp Heat Transfer, Fluid Mech and Thermo dyn, 141-157.
182. Welsh MC, Stokes AN, Hourigan K, and Stoneman SAT (1987), Acoustic sources of vibrations in cross flow tubular heat exchangers, Proc ASME-JSME Thermal Eng Conf 2, 635-640.
183. Bellows WJ and Mayle RE (1986), Heat transfer downstream of a leading edge separation bubble, J Turbo machinery 108, 131-136.
184. Cooper PI, Sheridan JC, Flood CJ, and Welsh MC (1983), The effect of sound on forced convection from a flat plate, 8th Australasian Fluid Mech Conf Univ of NSW.
185. Djilali N (1994), Forced laminar convection in an array of stacked plates, Numer Heat Transfer 25A, 393-408.
186. Djilali N, Gartshore I, and Salcudean M (1989), Calculation of convective heat transfer in re circulating turbulent flow using various near-wall turbulence models, Numer Heat Transfer 16A, 189-212.
187. Dyban EP, Epik EY, and Yushina LE (1994), Heat transfer on the surface of longitudinally streamlined bodies in the presence of closed separation and external flow turbulization, Heat Transfer 1994,4EC7, 25-30.
188. Hourigan K, Welch LW, Thompson MC, Cooper PI, and Welsh MC (1991), Augmented forced convection heat transfer in separated flow around a blunt flat plate, Exp Thermal Fluid Sci 4, 182-191.
189. Kazeminejad H, Ghamari M, and Yaghoubi MA (1996), A numerical study of convective heat transfer from a blunt plate at low Reynolds number, Int J Heat Mass Transfer 39, 125-133.
190. Kottke V (1983), Stromung Stoff, Wãrme- und Impulsübertragung in loka-len Ablõsegebieten, Fortschr-Ber VDI-Z Reihe 7, 77.
191. Kottke V, Blenke H, and Schmidt KG (1977a), EinfluB von Anstromprofil und Turbulenzintensitát auf die Uinstrõmung Lãngsangstrõmer Platten endlicher Dicke, Warme- und Stoffiibertragung 10, 159-174.
192. Kottke V, Blenke H, and Schmidt KG (1977b), Bestimmung des ortlichen und mittleren Stoffiibergangs an Lángsangestrõmten Platten endiichen Dicke mit Ablõsen und Wiederanlegen der Strõmung, Würme- und Stoffiibertragung 10, 217-232.
193. McCormick DC, Lessman RC, and Test FL (1984), Heat transfer to separated flow regions from a rectangular prism in a cross stream, J Heat Transfer 106, 276-283.
194. Mehendale AB, Han JC, and Ou S (1991), Influence of high mainstream turbulence on leading edge heat transfer, J Heat Transfer 113, 843-850.
195. Nishiyama H, Ota T, and Sato K (1988), Temperature fluctuations in a separated and reattached turbulent flow over a blunt flat plate, Würme- und Stoffiibertragung 23, 275-281.
196. Okamoto R and Ota T (1996), Large eddy simulation of a separated and reattached flow and heat transfer over a blunt flat plate, Proc 3rd KSME-JSME Thermal Eng Conf 1,43-48.
197. Okamoto R and Ota T (1997a), Large eddy simulation of turbulent separated and reattached flow over a blunt flat plate, Trans JSME 63B, 175-181.
198. Okamoto R and Ota T (1997b), Large eddy simulation of turbulent heat transfer over a blunt flat plate, Trans JSME 63B, 1344-1350.
199. Ota T and Kato, H (1991), Turbulent heat transfer in a separated and reattached flow over a blunt flat plate, Proc ASME-JSME Thermal Eng Conf 3, 191-196.
200. Ota T and Kon N (1979), Heat transfer in the separated and reattached flow over blunt flat plates - Effects of nose shape, Int J Heat Mass Transfer 22, 197-206.
201. Ota T and Kon N (1980), Turbulent transfer of momentum and heat in a separated and reattached flow over a blunt flat plate, J Heat Transfer 102,749-754.
202. Ota T, Kon, N and Kikuchi, S (1980), Temperature and velocity fields in the separated and reattached flow over blunt flat plates, Bull JSME 23,402-408.
203. Ota T and Nishiyama H (1987), A correlation of maximum turbulent heat transfer coefficient in reattachment flow region, Int J Heat Mass Transfer 30, 1193-1200.
204. Ota T and Ohi N (1995), Turbulent heat transfer in a separated and reattached flow over a blunt flat plate, Proc ASME-JSME Thermal Eng Conf, 363-370.
205. Ota T and Yanaoka H (1993), Numerical analysis of a separated and reattached flow over a blunt flat plate, Proc 5th Int Symp on Compt Fluid Dynamics 3, 423-428.
206. Ota T and Yanaoka H (1995), Numerical analysis of a separated and reattached flow and heat transfer over a blunt flat plate, Proc ASME-JSME Thermal Eng Conf, 7, 393-400.
207. Sorensen A (1969), Mass transfer coefficients on truncated slabs, Chem Eng Sci 24, 1445-1460.
208. Sparrow EM, Kang SS, and Chuck W (1987), Relation between the points of flow reattachment and maximum heat transfer for regions of flow separation, Int J Heat Mass Transfer 30, 1237-1246.
209. Tafti DK (1993), Vorticity dynamics and scalar transport in separated and reattached flow on a blunt plate, Phys Fluids A5, 1661-1673.
210. Test FL and Lessmann RC (1980), An experimental study of heat transfer during forced convection over a rectangular body, J Heat Transfer 102, 146-151.
211. Thompson MC, Hourigan K, and Welsh MC (1986), Numerical simulation of heat transfer in the separated and reattached flow on a blunt flat plate, Int Comm Heat Mass Transfer 13, 665-674.
212. Yanaoka H and Ota T (1996a), Three-dimensional numerical simulation of separated and reattached flow and heat transfer over blunt flat plate, Trans JSME 62B, 1111-1117.
213. Yanaoka H and Ota T (1996b), Three-dimensional numerical simulation of laminar flow and heat transfer over blunt flat plate in a channel, Trans JSME 62B, 1496-1501.
214. Yanaoka H and Ota T (1996c), Three-dimensional numerical simulation of unsteady flow and heat transfer over blunt flat plate in a channel, Trans JSME 62B, 2745-2750.
215. Yanaoka H and Ota T (1996d), Three-dimensional numerical simulation of separated and reattached flow and heat transfer over blunt flat plate at high Reynolds number, Trans JSME 62B, 3439-3445.
216. Abdelhalim AM, Ghia U, and Ghia KN (1986), Analysis of turbulent flow past a class of semi-infinite bodies, J Fluids Eng 108, 157-165.
217. Acar H, Ilday O, Elbay MK, and Atli V (1993), Separated flow around a plane-nosed circular cylinder at zero angle of attack, La Recherche Aerospatiale 1993-3, 55-62 (in French).
218. Fung K S (1996), Unsteady measurements near leading edge of separated flow, JSME Int J 39, 354-360.
219. Ghia U and Davis RT (1974), Navier-Stokes solutions for flow past a class of two-dimensional semi-infinite bodies, AlAA J 12, 1659-1665.
220. Govinda Ram HS and Arakeri VH (1990), Studies on unsteady pressure fields in the region of separating and reattaching flows, J Fluids Eng 112,402-408.
221. Halim A and Ghia U (1987), Longitudinal flow along circular cylinders and thick plates, including blunt leading-edge separation, AlAA J 25, 655-658.
222. Kiya M, Mochizuki O, Ido Y, and Kosaku H (1993a), Effects of periodic forcing on a turbulent separation zone of a blunt circular cylinder, Trans JSME 59B, 366-372.
223. Kiya M, Mochizuki O, Ido Y, and Kosaku H (1993b), Structure of turbulent leading-edge separation bubble of a blunt circular cylinder and its response to sinusoidal disturbances, J Wind Eng Indust Aero dyn 49,227-236.
224. Kiya M, Mochizuki O, Tamura H, Nozawa T, and Ishikawa R (1991), Turbulence properties of an axisymmetric separation-and-reattaching flow, AlAA J 29,936-941.
225. Kiya M, Shimizu M, and Mochizuki O (1997), Sinusoidal forcing of a turbulent separation bubble, J Fluid Mech 342, 119-139.
226. Kiya M, Shimizu M, Mochizuki O, and Ido Y (1992), Response of an axisymmetric separation bubble to sinuous disturbances, Trans JSME 58B, 2953-2958.
227. Kiya M, Shimizu M, Mochizuki O, and Ido Y (1995), Bimodal forcing of a turbulent leading-edge separation bubble, ASME FED 217, 175-182.
228. Kudoh D, Kiya M, Mochizuki O, and Anezaki Y (1998), Interactive control of a turbulent separated-and-reattaching flow, Trans JSME 64B, 979-985.
229. Ota T (1975), An ax symmetric separated and reattached flow on a longitudinal blunt circular cylinder, J ApplMech 97, 311-315.
230. Ota T and Kon N (1977), Heat transfer in an ax symmetric separated and reattached flow over a longitudinal blunt circular cylinder, J Heat Transfer 99, 155-157.
231. Ota T and Motegi H (1980), Turbulence measurements in an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder, J Appl Mech 47, 1-6.
232. Ota T, Kon N, Hatakeyama S, and Sato S (1980), Measurements of turbulent shear stress and heat flux in an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder, Bull JSME 23,1639-1645.
233. Saathoff PJ and Melbourne WH (1987), Freestream turbulence and wind tunnel blockage effects on stream wise surface pressures, J Wind Eng Indust Aerodyn 26, 353-370.
234. Shimizu M, Kiya M, Mochizuki O, and Ido Y (1993), Response of an ax symmetric separation bubble to sinusoidal forcing (Effects of forcing frequency, forcing level and Reynolds number), Trans JSME 59B, 721-727.
235. Shimizu M, Kiya M, Mochizuki O, and Ido Y (1994), Control of a leading-edge separation bubble by bimodal disturbances, Trans JSME 60B, 432-437.
236. Shimizu M, Kiya M, Mochizuki O, and Ido Y (1995), Response of an ax symmetric separation bubble to sinusoidal forcing (Effects of strong disturbances and change in the separated-shear-iayer, vortex structure), Trans JSME 61B, 2008-2015.
237. Sigurdson LW (1995), The structure and control of a turbulent reattaching flow, J Fluid Mech 298, 139-165.
238. Spairow EM (1988), Heat transfer in fluid flows which do not follow the contour of bounding walls, J Heat Transfer 110, 1145-1153.
239. Watanabe K (1996), Characteristics of axial flow around stepped cylinder, Trans JSME 62B, 2130-2135.
240. Chen YM and Wang KC (1996), Simulation and measurement of turbulent heat transfer in a channel with a surface-mounted rectangular heated block, Heat Mass Transfer 31, 463-473.
241. Chyu MK and Natarajan V (1991), Local heat/mass transfer distributions on the surface of a wall-mounted cube, J Heat Transfer 113, 851-857.
242. Fujita H, Takahama H, and Yamashita R (1976), The forced convective heat transfer on a plate with a cylinder inserted in the boundary layer, Trans JSME 42, 2828-2836.
243. Fusegi T (1995), A computational study of a thermally-stratified channel with obstruction, Turbulence, Heat Mass Transfer 1, 359-365
244. Garcia A and Sparrow EM (1987), Turbulent heat transfer downstream of a contraction-related, forward-facing step in a duct, J Heat Transfer 109, 621-626.
245. Hsieh S-S, Shih H-J, and Hong Y-J (1990), Laminar forced convection from surface-mounted ribs, Int J Heat Mass Transfer 33, 1987-1999.
246. Igarashi T and Takasaki H (1990), Fluid flow and heat transfer around a rectangular cylinder in a flat plate laminar boundary layer, Trans JSME 56B, 2759-2766.
247. Igarashi T and Yamasaki H (1989), Fluid flow and heat transfer of a rectangular cylinder in the turbulent boundary layer on a plate, Trans JSME 55B, 3157-3165.
248. Kim SY, Kang BH and Hyun JM (1998), Forced convection heat transfer from two heated blocks in pulsating channel flow, Int J Heat Mass Transfer 41, 625-634.
249. Luyzhanskiy BY and Solntsev VP (1971), Experimental study of heat transfer in the zone of turbulent boundary layer separation ahead of a step, Heat Transfer - Soviet Res 3, 200-206.
250. Matsubara K, Suzuki K, Treidler EB, Suzuki H, and Mae Y (1994), Unsteady flow and heat transfer in a channel with two ribs attached to one wall, Heat Transfer 1994, 13HA13, 73-78.
251. Meinders ER, Hanjalic K, and van der Meer TH (1998), Similarity and dissimilarity between the surface heat transfer and the flow structure in turbulent flows over surface-mounted cubes, Heat Transfer 1998, 3,51-56.
252. Mori Y and Daikoku T (1972), Effect of 2-dimensional roughness on forced convective heat transfer, Trans JSME 38, 832-841.
253. Mueller TJ, Korst HH, and Chow WL (1964), On the separation, reattachment, and redevelopment of incompressible turbulent shear flow, ASME J Basic Eng 86, 221 -226.
254. Nakajima M and Ota T (1998), Numerical simulation of three dimensional unsteady flow and heat transfer around a surface-mounted hexahedron in a channel, Heat Transfer 1998, 3, 133-138.
255. Nakajima M, Ota T, and Yanaoka H (1997), Numerical simulation of unsteady flow and heat transfer around a surface step, Proc Transport Phenomena in Thermal Sci and Process Eng, 1, 233-237.
256. Nakajima M, Yanaoka H, and Ota T (1998), Three-dimensional numerical analysis of flow and heat transfer around a surface-mounted hexahedron in a channel, Trans JSME 64B, 4116-4121.
257. Nakayama W and Park S-H (1996), Conjugate heat transfer from a single surface-mounted block to forced convective air flow in a channel, J Heat Transfer 118, 301-309.
258. Natarajan V and Chyu MK (1994a), Effect of flow and angle-of-attack on the local heat/mass transfer from a wall-mounted cube, J Heat Transfer 116,552-560.
259. Natarajan V and Chyu M K (1994b), Convective heat transfer from finite cylinders mounted on a plane wall, Heat Transfer 1994,4-EC-15.
260. Ota T and Kaga Y (1992), Numerical analysis of laminar heat transfer around a surface step, Proc 3rd UK Natl Conf/Ist European Conf on Thermal Sci 2, 797-804.
261. Ota T, Nakajima M, and Yanaoka H (1998), Numerical analysis of twodimensional unsteady laminar flow and heat transfer around a rectangular cylinder on a surface, Trans JSME 64B, 226-231.
262. Ota T, Yanaoka H, and Nakajima M (1995), Numerical analysis of laminar flow and heat transfer around a surface-mounted hexahedron, Proc ASME-JSME Thermal Eng Conf, 1, 313-320.
263. Roller PT, Stevens J, and Webb BW (1991), Heat transfer and turbulent flow characteristics of isolated three-dimensional protrusions in channels, J Heat Transfer 113, 597-603.
264. Seban RA and Caldwell GL (1968), The effect of a spherical protuberance on the local heat transfer to a turbulent boundary layer, J Heat Transfer 90,408-412.
265. Solntsev VP, Luzhanskii BE, and Krynkov VN (1973), An investigation of heat transfer in the turbulent separation zones in the vicinity of sudden steps, Heat Transfer- Soviet Res 5, 122-128.
266. Terekhov VI, Yarygina NI, and Zhdanov RF (1997), Heat transfer in the separated and reattached flow behind a rib and downward step during free stream turbulization, Exp Heat Transfer, Fluid Mech, and Thermo-dyn 7997,1571-1577.
267. Terekhov VI, Yatygina NI, and Zhdanov RF (1998), Effect of free-stream turbulence on heat transfer behind a rib and inclined downward step, Heat Transfer 1998, 3, 189-194.
268. Yoo SY, Goldstein RJ, and Chung MK (1993), Effects of angle of attack on mass transfer from a square cylinder and its base plate, Int J Heat Mass Transfer 36, 371-381.