Hydrodynamics of deinking flotation

International Journal of Mineral Processing

Volumn 56, Issue 1-4, 1999, Pages 277-316

  Julien Saint Amand, François ^a  

^a CENTRE TECHNIQUE DU PAPIER   (France)

Author keywords

Bubbles; Deinking; Flotation; Kinetics; Turbulence; Waste paper

Indexed keywords

BUBBLE FORMATION; DEINKING; HYDRODYNAMICS; MIXING; PARTICLE SIZE ANALYSIS; REACTION KINETICS; RECYCLING; SEPARATION; TURBULENCE; WASTE PAPER;

AERATION; BUBBLE SIZE; DEINKING FLOTATION;

FLOTATION;

BUBBLE; FLOTATION; HYDRODYNAMICS; INK; KINETICS; PAPER; RECYCLING;

EID: 0011781081     PISSN: 03017516     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0301-7516(98)00050-7     Document Type: Article

References (68)

1. Abrahamson J. Collision rates of small particles in a vigorously turbulent fluid. Chemical Engineering Science. 30:1975;1371-1379.
2. Ahmed N., Jameson G.J. Flotation kinetics. Mineral Processing and Extractive Metallurgy Review. 5:1989;77-99.
3. Ajersch, M., Pelton, R., 1993. The growth of bubbles on pulp fibers and on carbon black dispersed in supersaturated carbon dioxide solutions. CPPA, 2nd Research Forum on Recycling, pp. 129-134.
4. Ajersch, M., Pelton, R., 1995. Mechanisms of pulp loss in flotation deinking, 3rd Research Forum on Recycling, 20-22 Nov. 1995, Vancouver, pp. 27-40.
5. Barnscheidt W. Die Weiterentwichlung des Verticell Verfahrens. Wochenblatt für Papier-fabrikation. 113(13):1985;484-485.
6. Barnscheidt, W., 1987. Uberlegungen zur Auslegung eines Deinkinginjektors, PTS Deinking Symposium. Munich, p. 85.
7. Bechstein G., Unger E. Ein Beitrag zur Klärung der Wirkungsweise von Sammlern beim Deinking flotationsprozess. Zellstoff und Papier. 10:1972;297-306.
8. Binder, G., 1993. La turbulence. ENSHMG/INPG course, Grenoble.
9. Bird, R.B., Stewart, W.E., Lightfoot, E.N., 1960. Transport Phenomena, Wiley.
10. Britz H. Flotations deinking - Grundlagen und Systemeinbindung. Wochbl. Papierfab. 10:1993;394-401.
11. Britz H., Peschl A. Flotationsdeinken bei erhöhten Stoffdichten - oder wirtschaftlich flotiert. Wochbl. Papierfab. 15:1994;603-608.
12. Carletti, C., Wood, R.J., 1996. Spidercel Reactor technology improves flotation deinking efficiency. TAPPI Recycling Symposium Proc., pp. 321-324.
13. Carlton, K.A., 1996. New deinking system combines GSC contacting with tower flotation technology. TAPPI Recycling Symposium Proc., pp. 325-331.
14. Chudacek, M.W., Fichera, M.A., Estrina, H., Marshall, S.H., 1995. Initial experiments on newsprint deinking by the Fastflot process. Progress in Paper Recycling, pp. 26-31.
15. Comolet, R., Bonnin, J., 1961. Mécanique expérimentale des fluides. Masson et Cie.
16. Davidson J.F., Schuler B.O.G. Bubble formation at an orifice in a viscous liquid. Trans. Int. Chem. Engrs. 38:1960;335.
17. Dessureault, S., Levesque, M., Barbe, M.C., 1995. Column flotation: a new technology for deinking recycled pulp. TAPPI, Recycling Symposium Proc., pp. 251-255.
18. Dorris, G.M., Pagé, M., 1995. Deinking of toner printed papers: Part 1. Flotation kinetics, froth stability and fibre entrainment. 3rd Research Forum on Recycling. Vancouver, 20-22 Nov. 1995, pp. 215-225.
19. Ferguson, L.D., 1991. A review of flotation deinking technology. Progress in Paper Recycling, pp. 17-23.
20. Fischer S. Modellvorstellungen für die physikalish-chemischen Vorgänge in der Flotationsstufe des Deinking-Prozesses. Wochenblatt für Papier-fabrikation. 110(14):1982;511-514.
21. Floccia, L., 1995. Some comments about industrial cells for DIP. International Wastepaper Technology Conference. London Gatwick, 13-15 June, 1995, p. 4.
22. Fortier, A., 1967. Mécanique des Suspensions. Masson et Cie.
23. Galland, G., Bernard, E., Sauret, G., 1977. Aspect physico-chimique du désencrage. Revue ATIP, 31, pp. 10, 374-378.
24. Gilkey, M.W., Yoshida, H., 1992. A new high efficiency flotation device. Proceedings, 78th Annual meeting, Technical Section, CPPA, January 31, 1992, pp. B153-B158.
25. Gilkey, M.W., Conte, T.O., Seifert, P., 1994. Field experiences with a new high air rate flotator. TAPPI, Recycling Symposium Proc., pp. 163-170.
26. Göttsching, L., Hunold, M., Krauthauf, T., Müller, J., Putz, H.J., 1995. Effect of Air Volume and Air Bubble Size Distribution on Flotation in Injector Aerated Deinking Cells. CPPA, 3rd Research Forum on Recycling, 20-22 Nov. 1995. Vancouver, pp. 17-25.
27. Grossmann, H., Hanecker, E., Schulze, G., 1997. Flotation of recycled pulp in a centrifugal force field. TAPPI Recycling Symposium Proc., Chicago, 14-16 April 1997, pp. 65-72.
28. Heindel, T.J., 1997. The fundamentals of flotation deinking. TAPPI Pulping Conference Proceedings. San Francisco, 19-23 October 1997, pp. 521-533.
29. Hinze, J.O., 1959. Turbulence. MacGraw-Hill.
30. Hori H. The present state of small scale papermaking in Japan. Treatment of waste paper. Japan Pulp and Paper. 28(4):1996;19.
31. Hornfeck K. Flotationshilfsmittel und deren Einfluss auf den Deinking Prozess. Wochenblatt für Papierfabrikation. 110-115:1982;542-544.
32. Hou, M.J., Hui, S.H., 1993. Interfacial phenomena in deinking: Part 1. Stability of ink particle-air bubble aggregates in flotation deinking. TAPPI, Pulping Conference Proceedings, pp. 1125-1142.
33. Ives, K.J., 1984. The Scientific Basis of Flotation. Martinus Nijhoff Publishers.
34. Julien Saint Amand F. Evaluation des techniques d'épuration en fonction des caractéristiques physiques des contaminants. Recherche de modèles. Revue ATIP. 45(4):1991;145-164.
35. Julien Saint Amand, F., Perrin, B., 1991. The effect of particle size on ink and speck removal efficiency of the deinking steps. 1st Research Forum on Recycling. 29-31 October 1991, Toronto, pp. 39-47.
36. Julien Saint Amand F., Bernard E., Lamort P. Entwicklung eines rotierenden Cleaners für hocheffizientz Leichtschmutzentfernung. Wochenblatt für Papierfabrikation. 113(20):1985;779-784.
37. Jordan B.D., Popson S.J. Measuring the concentration of residual ink in recycled newsprint. Journal of Pulp and Paper Science. 20(6):1964;161-167.
38. Klein, R., Schwarze, D., Grossmann, H., 1994. Beitrag zur Berwertung des Einflusses der Luftblasengrösse auf das Deinkingergebnis. 6th PTS Deinking Symposium, 15-18 March, 1994.
39. Kocer, H., Johnson, D.A., Thompson, E.V., 1995. Influence of air flow rate, time and total air volume on efficiency of toner removal in mixed office waste flotation. TAPPI, Recycling Symposium Proc., pp. 65-72.
40. Kurz, E., Frymark, J., 1992. The voith multi injector flotation cell. Proc. Pan Pacific Pulp and Paper Technology Conf., Tokyo, 8-10 September 1992, pp. 8-10, 131-138.
41. Larson A., Stenius P., Ström G. Zur Oberflächenchemie des Deinking Prozesses. Wochenblatt für Papierfabrikation. 110-114:1982;502-506.
42. Laskowski, J.S., 1989. Frothing in Flotation. Gordon & Breach.
43. Linck, E., Siewert, W.H., 1994. The new Escher Wyss flotation cell in an improved deinking system. TAPPI, Pulping Conference Proc., pp. 605-610.
44. Mac Cool, M.A., Carroll, W.P., 1990. Pressurized deinking module. TAPPI, Pulping Conference, pp. 145-152.
45. Mac Cool, M.A., Leblanc, P.E., 1989. Deinking and separation technology. PIRA Conference, Recent Developments in Waste Paper Processing and Use, Session 2, Paper 15. 28 Feb.-2 March, 1989, Gatwich.
46. Mac Kinney, R., 1996. The rise and rise of flotation deinking. PPE, January/February, 1996, pp. 21-23.
47. Nguyen-Van, A., Kmet, S., Schulze, H.J., 1995. Collection events in flotation: the quantitative analysis of the particle-bubble collision and the attachment of particle onto bubble surface. 19th Int. Mineral Processing Congress, San Francisco, 22-27 October, 1995.
48. Ortner H., Wood R.F., Gartemann H. Deinking-Stand und Entwicklung. Wochenblatt für Papierfabrikation. 103(6):1975;597-601.
49. Pan, R., Bousfield, D.W., Thompson, E.V., 1992. Modelling particle-bubble dynamics and adhesion in air bubble/solid particle/liquid systems. TAPPI, Pulping Conference Proc., pp. 941-956.
50. Pan, R., Paulsen, F.G., Johnson, D.A., Bousfield, D.W., Thompson, E.V., 1993. A global model for predicting flotation efficiencies: model results and experimental studies. TAPPI, Pulping Conference Proc., pp. 1155-1164.
51. Pan, R., Paulsen, F.G., Kocer, H., Nerez, R., Johnson, D.A., Bonsfield, D.W., Thompson, E.V., 1994. A global model for predicting flotation efficiencies: Part II. Particle size and flotation rate predictions, and experimental studies and comparisons. TAPPI, Recycling Symposium Proc., pp. 291-301.
52. Paulsen, F.G., Pan, R., Bousfield, D.W., Thompson, E.V., 1993. The dynamics of bubble/particle approach and attachment during flotation and the influence of short-range nonhydrodynamic forces on disjoining film rupture. CPPA, 2nd Research Forum on Recycling, pp. 1-12.
53. Pfalzer L., Schweiss P. Die Voith Multi-Injectorzelle-Fonktionsweise und Anwendung in einer modernen Deinkinganlage. Wochbl. Papierfab. 8:1988;303-307.
54. Plate, H., Schulze, H.J., 1991. Modeling of the overall flotation process based on physico-chemical micro-processes - Technique and application. 17th Int. Mineral Processing Congress, Dresden, 23-28 September, 1991.
55. Putz, H.J., Schaffrath, H.J., Göttsching, L., 1991. Deinking of oil and water-born printing inks - a new flotation deinking model. 1st Research Forum on Recycling, Conf. Proc., Toronto, pp. 183 - 190.
56. Santos, A., Carré, B., Roring, A., 1996. Contribution to a better understanding of the basic mechanisms involved in the pulping and flotation of offset ink particles. TAPPI, Recycling Symposium Proceeding, pp. 339-347.
57. Schmidt, D.C., Berg, J.C., Feb. 1996. The effect of particle shape on the flotation of toner particles. Progress in Paper Recycling, pp. 67-77.
58. Schulze, H.J., 1991. The fundamentals of flotation deinking in comparison to mineral flotation. 1st Research Forum on Recycling, Toronto, 29-31 October 1991, pp. 161-167.
59. Schulze H.J. Probability of particle attachment on gas bubbles by sliding. Advances in Colloid and Interface Science. 40:1992;283-305.
60. Schulze, H.J., 1994. Zur Hydrodynamik der Flotations-Elementarvorgänge. PTS Deinking Symposium, 5-8 May 1992. Wochenblatt für Papierfabrikation 5, Munich, 1994.
61. Schulze, H.J., 1996. Personal communication.
62. Schweizer G. Wochenblatt für Papierfabrikation. 93(19):1965;823-830.
63. Serres, A., Colin, E., 1996. The MAC flotation cell on a new deinking concept: Theory and practical results. 7th PTS Deinking Symposium, Munich, 7-9 May, 1996.
64. Stratton R.A. The surface chemistry of flotation of stickies and laser printed inks. Journal of Pulp and Paper Science. 18(6):1992;221-224.
65. Torregrossa, L.A., Chamblee, J.W., Platner, G., 1992. Flotation deinking with the gas sparged cyclone. Pan-Pacific Pulp and Paper Technology Conference, Tokyo, 8-10 September 1992, pp. 101-104.
66. Vidotti, R.M., Johnson, D.A., Thompson, E.V., 1995. Hydrodynamic particle volume and its relationship to mixed office waste paper flotation efficiency: Part. 1. TAPPI, Pulping Conference Proc., pp. 203-213.
67. Weiss, T., Schubert, H., 1987. Zum Einfluss des Feinstkornes auf die Turbulenz der Mehrphasen Strömung fest/flussig in einer Flotationszelle. Kolloquim Mehrphasenströmung, Antonshöhe, Report no. 16, pp. 133-147.
68. Yoon R.H. Hydrodynamic and surface forces in bubble-particle interactions. Aufbereitungs-Technik. 32(9):1991;474-485.