Report No. 1: Interpretative review of weld fatigue-strength-reduction and stress-concentration factors

Welding Research Council Bulletin

Volumn , Issue 432, 1998, Pages 1-25

  Jaske, C E ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

CRACKS; CYCLIC LOADS; DATABASE SYSTEMS; FATIGUE OF MATERIALS; HEAT AFFECTED ZONE; PIPE JOINTS; PRESSURE VESSEL CODES; RESIDUAL STRESSES; STRENGTH OF MATERIALS; STRESS CONCENTRATION; STRUCTURAL ANALYSIS;

FATIGUE-STRENGTH-REDUCTION FACTORS (FSRF);

WELDS;

EID: 0010544496     PISSN: 00432326     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (45)

1. Andrews, R. M. and Jones, R. L., "The Fatigue Performance of Single Sided Closure Welds in Offshore Structures," Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering, Vol. III-B, American Society of Mechanical Engineers, New York, 1991, pp. 377-383.
2. Anon., Criteria of the ASME Boiler and Pressure Vessel Code for Design by Analysis in Sections III and VIII, Division 2, American Society of Mechanical Engineers, New York, 1969.
3. AWS, Standard Welding Terms and Definitions, ANSI/AWS A3.0-89, American Welding Society, Miami, 1989.
4. AWS, Structural Welding Code - Steel, ANSI/AWS D1.1-94, American Welding Society, Miami, 1994.
5. Barsom, J. M. and Vecchio, R. S., "Fatigue Behavior of Weldments," WRC Bulletin, 422, June 1997.
6. Baudry, G., Amzallag, C. and Bernard, J. L., "Fatigue Behavior of Heterogeneous Weldments Between Stainless and Low Alloy Steels," Fatigue Life: Analysis and Prediction, ASM International, Materials Park, OH, 1986, pp. 381-392.
7. Booth G. S., "Constant Amplitude Fatigue Tests on Welded Steel Joints Performed in Air," European Offshore Steels Research Seminar, Welding Institute, Cambridge, UK, 1980, pp. III/4-1 to III/4-15.
8. Booth G. S., "Constant Amplitude Corrosion Fatigue Strength of Welded Joints," Fatigue in Offshore Structural Steels, Paper 2, Thomas Telford Ltd., London, 1981, pp. 5-16.
9. Cole, I. and Vittori, O., "TMCP Steels and the Thickness Effect," Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering, Vol. III-B, American Society of Mechanical Engineers, New York, 1991, pp. 331-337.
10. Dieter G. E., Mechanical Metallurgy, Second Edition, McGraw-Hill, Inc., New York, 1976.
11. English, W. F., Greene, R. L., Hughes, D. A. and Post, R. I., "Discussion of Fatigue Design Criteria for Pressure Vessel Alloys," Journal of Pressure Vessel Technology, 100, 1978, pp. 236-238.
12. Harvey J. F., Theory and Design of Pressure Vessels, Second Edition, Van Nostrand Reinhold, New York, 1991.
13. Heald, J. D. and Kiss, E., "Low Cycle Fatigue of Nuclear Pipe Components," Journal of Pressure Vessel Technology, 96, 1974, pp. 171-176.
14. Higuchi, M., Nakagawa, A., Chujo, N., Iida, K., Matsuda, F. and Sato, M., "Effects of Weld Defects at Root on Rotating Bending Fatigue Strength of Small Diameter Socket Welded Pipe Joints," Pressure Vessels and Piping Codes and Standards, PVP-Vol. 338, Vol. 1, American Society of Mechanical Engineers, New York, 1996a, pp. 3-10.
15. Higuchi M., Nakagawa, A., Hayashi, M., Yamauchi, T., Saito, M., Iida, K., Matsuda, F. and Sato, M., "A Study on Fatigue Strength Reduction Factor for Small Diameter Socket Welded Pipe Joints," Pressure Vessels and Piping Codes and Standards, PVP-Vol. 338, Vol. 1, American Society of Mechanical Engineers, New York, 1996b, pp. 11-19.
16. Iida, K. and Iino, N., "Effect of Angular Distortion on Fatigue Strength of Transverse Butt Welds in High Strength Steels," International Institute of Welding Paper XIII, 1977, pp. 827-877.
17. Jaske, C. E. and O'Donnell, W. J., "Fatigue Design Criteria for Pressure Vessel Alloys," Journal of Pressure Vessel Technology, 99, 1977, pp. 584-592.
18. Koves, W. J., "Comparison Pressure Vessel and Piping Criteria," Paper No 88-PVP-5, American Society of Mechanical Engineers, New York, 1988.
19. Lawrence, F. V., "Coping With Weldment Geometry in Fatigue Design: Problems and Options," Sixth Annual North American Welding Research Conference, Columbus, OH, 1990.
20. Leshnoff, S. and Riccardella, P. C., Metal Fatigue in Operating Nuclear Power Plants, EPRI TR-100252, Electric Power Research Institute, Palo Alto, CA, 1992.
21. Lundin, C. D., "Bibliography on Fatigue of Weldments and Literature Review on Fatigue Crack Initiation from Weld Discontinuities," WRC Bulletin, 333, May 1988.
22. Maddox, S. J., "Fatigue Analysis of Welded Joints Using Fracture Mechanics," Fatigue Life: Analysis and Prediction, ASM International, Materials Park, OH, 1986, pp. 155-166.
23. Markl, A. R. C., "Fatigue Tests of Piping Components," Transactions ASME, 74, 1952, pp. 287-303.
24. Nishijima, S., et al., Data Sheets on Fatigue Properties for Butt Welded Joints of SB42 Carbon Steel Plate for Boilers and Other Pressure Vessels - Effect of Stress Ratio, NRIM Fatigue Data Sheet No. 34, National Research Institute for Metals, Tokyo, 1983.
25. Nishijima, S., et al., Data Sheets on Fatigue Properties for Butt Welded Joints of SPV50 Steel Plate for Pressure Vessels - Effect of Stress Ratio, NRIM Fatigue Data Sheet No. 40, National Research Institute for Metals, Tokyo, 1984a.
26. Nishijima, S., et al., Data Sheets on Fatigue Crack Propagation Properties for Butt Welded Joints of SB42 Carbon Steel Plate for Boilers and Other Pressure Vessels - Effect of Stress Ratio, NRIM Fatigue Data Sheet No. 41, National Research Institute for Metals, Tokyo, 1984b.
27. 2 YS) Steel Plate for Pressure Vessels - Effect of Stress Ratio, NRIM Fatigue Data Sheet No. 46, National Research Institute for Metals, Tokyo, 1985a.
28. 2YS) Steel Plate for Pressure Vessels, NRIM Fatigue Data Sheet No. 47, National Research Institute for Metals, Tokyo, 1985b.
29. Nishijima, S., et al., Data Sheets on Fatigue Properties for Butt Welded Joints of SUS304-HP (18Cr-8Ni) Hot Rolled Stainless Steel Plate - Effect of Stress Ratio, NRIM Fatigue Data Sheet No. 53, National Research Institute for Metals, Tokyo, 1986a.
30. Nishijima, S., et al., Data Sheets on Fatigue Crack Propagation Properties for Butt Welded Joints of SUS304-HP (18Cr-8Ni) Hot Rolled Stainless Steel Plate - Effect of Stress Ratio, NRIM Fatigue Data Sheet No. 54, National Research Institute for Metals, Tokyo, 1986b.
31. 2TS) Carbon Steel Plate for Boilers and Other Pressure Vessels, NRIM Fatigue Data Sheet No. 57, National Research Institute for Metals, Tokyo, 1987.
32. Nishijima, S., et al., Data Sheets on Fatigue Properties for Weld and Base Metals of SUS304-HP (18Cr-8Ni) Hot Rolled Stainless Steel Plate, NRIM Fatigue Data Sheet No. 65, National Research Institute for Metals, Tokyo, 1990.
33. Peterson, R. E., Stress Concentration Factors, John Wiley & Sons, New York, 1974.
34. Radziminski, J. B., Srinivasan, R., Moore, D., Thrasher, C. and Munse, W. H., Fatigue Data Bank and Data Analysis Investigation, UILU-ENG-73-2025, University of Illinois, Urbana, IL, 1973.
35. Roberts, D. I., Ryder, R. H. and Viswanathan, R., "Performance of Dissimilar Welds in Service," Residual-Life Assessment, Nondestructive Examination, and Nuclear Heat Exchanger Materials, PVP-Vol. 98-1, American Society of Mechanical Engineers, New York, 1985, pp. 55-63.
36. Rodabaugh, E. C., Comparisons of ASME Code Fatigue Evaluation Methods for Nuclear Class 1 Piping With Class 2 or 3 Piping, NUREG/CR-3243, E. C. Rodabaugh Associates, Hilliard, OH, 1983.
37. Rodabaugh, E. C. and Moore, S. E., Phase Report No. 115-10 on Comparisons of Test Data With Code Methods for Fatigue Evaluation, ORNL-TM-3520, Oak Ridge National Laboratory, Oak Ridge, TN, 1971.
38. Scott, P. M. and Wilkowski, G. M., "A Comparison of Recent Full-Scale Component Fatigue Data With the ASME Section III Fatigue Design Curves," Fatigue and Crack Growth: Environmental Effects, Modeling Studies, and Design Considerations, PVP-Vol. 306, American Society of Mechanical Engineers, New York, 1995, pp. 129-138.
39. Smith, K. N., Watson, P. and Topper, T. H., "A Stress-Strain Parameter for the Fatigue of Metals," Journal of Materials, 5, 1970, pp. 767-778.
40. Topper, T. H., Wetzel, R. M. and Morrow, J. D., "Neuber's Rule Applied to Fatigue of Notched Specimens," Journal of Materials, 4, 1969, pp. 200-209.
41. van der Zanden, A. M., Robins, D. B. and Topper, T. H., "Fatigue Life Prediction for Weldments With Internal Cavities," Testing for Prediction of Material Performance in Structures and Components, ASTM STP 515, American Society for Testing and Materials, Philadelphia, 1972, pp. 268-284.
42. Vaessen, G. H. G., de Back, J. and van Leeuwen, J. L., "Fatigue Behavior of Welded Steel Joints in Air and Seawater," Journal of Petroleum Technology, 34, 1982, pp. 440-446.
43. Vosikovsky, O. and Bell, R., "Attachment Thickness and Weld-Profile Effects on Fatigue Life of Welded Joints," Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering, Vol. III-B, American Society of Mechanical Engineers, New York, 1991, pp. 339-362.
44. Yagi, J., Machida, S., Tomita, Y., Matoba, M. and Soya, I., "Influencing Factors on Thickness Effect of Fatigue Strength in As-Welded Joints for Steel Structures," Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering, Vol. III-B, American Society of Mechanical Engineers, New York, 1991a, pp. 305-313.
45. Yagi, J., Machida, S., Tomita, Y, Matoba, M. and Soya, I., "Thickness Effect Criterion for Fatigue Strength Evaluation of Welded Steel Structures," Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering, Vol. III-B, American Society of Mechanical Engineers, New York, 1991b, pp. 315-322.