메뉴 건너뛰기




Volumn 54, Issue 6, 2001, Pages 503-524

Review of inverse analysis for indirect measurement of impact force

Author keywords

[No Author keywords available]

Indexed keywords


EID: 0010078395     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1420194     Document Type: Article
Times cited : (203)

References (81)
  • 1
    • 0017505664 scopus 로고
    • Analysis of elastic waves from two-point strain measurement
    • Lundberg B and Henchoz A (1977), Analysis of elastic waves from two-point strain measurement, Exp. Mech. 17, 213-218.
    • (1977) Exp. Mech , vol.17 , pp. 213-218
    • Lundberg, B.1    Henchoz, A.2
  • 5
    • 85137273366 scopus 로고
    • An experimental surface-wave method for recording force-time curves in elastic impacts
    • Goodier JN, Jahsman WE, and Ripperger EA (1959), An experimental surface-wave method for recording force-time curves in elastic impacts, ASME J. Appl. Mech. 26, 3-7.
    • (1959) ASME J. Appl. Mech , vol.26 , pp. 3-7
    • Goodier, J.N.1    Jahsman, W.E.2    Ripperger, E.A.3
  • 6
    • 0021386885 scopus 로고
    • An experimental method for determining the dynamic contact law
    • Doyle JF (1984), An experimental method for determining the dynamic contact law, Exp. Mech. 24, 10-16.
    • (1984) Exp. Mech , vol.24 , pp. 10-16
    • Doyle, J.F.1
  • 7
    • 0024907188 scopus 로고
    • Determining transverse impact force on a composite laminate by signal deconvolution
    • Chang C and Sun CT (1989), Determining transverse impact force on a composite laminate by signal deconvolution, Exp. Mech. 29, 414-419.
    • (1989) Exp. Mech , vol.29 , pp. 414-419
    • Chang, C.1    Sun, C.T.2
  • 8
    • 0029272950 scopus 로고
    • Two methods for determining impact-force history on elastic plates
    • Wu E, Tsai T-D, and Yen C-S (1995), Two methods for determining impact-force history on elastic plates, Exp. Mech. 35, 11-18.
    • (1995) Exp. Mech , vol.35 , pp. 11-18
    • Wu, E.1    Tsai, T.-D.2    Yen, C.-S.3
  • 9
    • 85024668047 scopus 로고
    • On the inverse problem of rectangular plates subjected to elastic impact, Part II: Experimental verification and further applications
    • Yen C-S and Wu E (1995), On the inverse problem of rectangular plates subjected to elastic impact, Part II: Experimental verification and further applications, ASME J. Appl. Mech. 62, 699-705.
    • (1995) ASME J. Appl. Mech , vol.62 , pp. 699-705
    • Yen, C.-S.1    Wu, E.2
  • 10
    • 0028483950 scopus 로고
    • Impact on composite laminated plates: An inverse method
    • Wu E, Yeh J-C, and Yen C-S (1994), Impact on composite laminated plates: an inverse method, Int. J. Impact Eng. 15, 417-433.
    • (1994) Int. J. Impact Eng , vol.15 , pp. 417-433
    • Wu, E.1    Yeh, J.-C.2    Yen, C.-S.3
  • 11
    • 0032208969 scopus 로고    scopus 로고
    • Forward and inverse analysis for impact on sandwich panels
    • Tsai C-Z, Wu E, and Luo B-H (1998), Forward and inverse analysis for impact on sandwich panels, AIAA J. 36, 2130-2136.
    • (1998) AIAA J , vol.36 , pp. 2130-2136
    • Tsai, C.-Z.1    Wu, E.2    Luo, B.-H.3
  • 13
    • 0031118994 scopus 로고    scopus 로고
    • Estimation of impact force on a space vehicle based on an inverse analysis technique (In Japanese)
    • Tanaka H and Ohkami Y (1997), Estimation of impact force on a space vehicle based on an inverse analysis technique (in Japanese), Trans. Jpn. Soc. Mech. Eng., Ser. C 63C, 1172-1178.
    • (1997) Trans. Jpn. Soc. Mech. Eng., Ser. C , vol.63C , pp. 1172-1178
    • Tanaka, H.1    Ohkami, Y.2
  • 14
    • 0024620646 scopus 로고
    • An estimation of impact force by convolution integral (In Japanese)
    • Hojo A, Chatani A, and Uemura F (1989), An estimation of impact force by convolution integral (in Japanese), Trans. Jpn. Soc. Mech. Eng., Ser.A 55A, 477-482.
    • (1989) Trans. Jpn. Soc. Mech. Eng., Ser.A , vol.55A , pp. 477-482
    • Hojo, A.1    Chatani, A.2    Uemura, F.3
  • 15
    • 0026419869 scopus 로고
    • A time domain method for identifying dynamic loads on continuous systems
    • Zhu J and Lu Z (1991), A time domain method for identifying dynamic loads on continuous systems, J. Sound Vib. 148, 137-146.
    • (1991) J. Sound Vib , vol.148 , pp. 137-146
    • Zhu, J.1    Lu, Z.2
  • 16
    • 0018108261 scopus 로고
    • A technique for obtaining compressive strength at high strain rates using short load cells
    • Holzer AJ (1978), A technique for obtaining compressive strength at high strain rates using short load cells, Int. J. Mech. Sci. 20, 553-560.
    • (1978) Int. J. Mech. Sci , vol.20 , pp. 553-560
    • Holzer, A.J.1
  • 17
    • 0021595541 scopus 로고
    • Further developments in determining the dynamic contact law
    • Doyle JF (1984), Further developments in determining the dynamic contact law, Exp. Mech. 24, 265-270.
    • (1984) Exp. Mech , vol.24 , pp. 265-270
    • Doyle, J.F.1
  • 18
    • 0023311615 scopus 로고
    • Determining the contact force during the transverse impact of plates
    • Doyle JF (1987), Determining the contact force during the transverse impact of plates, Exp. Mech. 27, 68-72.
    • (1987) Exp. Mech , vol.27 , pp. 68-72
    • Doyle, J.F.1
  • 19
    • 0023648531 scopus 로고
    • Experimentally determining the contact force during the transverse impact of an orthotropic plate
    • Doyle JF (1987), Experimentally determining the contact force during the transverse impact of an orthotropic plate, J. Sound Vib. 118, 441-448.
    • (1987) J. Sound Vib , vol.118 , pp. 441-448
    • Doyle, J.F.1
  • 20
    • 0027556774 scopus 로고
    • Force identification from dynamic responses of a bimaterial beam
    • Doyle JF (1993), Force identification from dynamic responses of a bimaterial beam, Exp. Mech. 33, 64-69.
    • (1993) Exp. Mech , vol.33 , pp. 64-69
    • Doyle, J.F.1
  • 21
    • 0029760805 scopus 로고    scopus 로고
    • Impact force identification from wave propagation responses
    • Martin MT and Doyle JF (1996), Impact force identification from wave propagation responses, Int. J. Impact Eng. 18, 65-77.
    • (1996) Int. J. Impact Eng , vol.18 , pp. 65-77
    • Martin, M.T.1    Doyle, J.F.2
  • 23
  • 24
    • 0342393621 scopus 로고
    • Measurement of impact force applied to a plate by the deconvolution method
    • Inoue H, Shibuya T, Koizumi T, and Fukuchi J (1989), Measurement of impact force applied to a plate by the deconvolution method, Trans JSNDI 2, 74-83.
    • (1989) Trans JSNDI , vol.2 , pp. 74-83
    • Inoue, H.1    Shibuya, T.2    Koizumi, T.3    Fukuchi, J.4
  • 25
    • 0017991372 scopus 로고
    • Numerical Laplace transformation and inversion
    • Wilcox DJ (1978), Numerical Laplace transformation and inversion, Int. J. Electr. Eng. Educ. 15, 247-265.
    • (1978) Int. J. Electr. Eng. Educ , vol.15 , pp. 247-265
    • Wilcox, D.J.1
  • 27
    • 0024012241 scopus 로고
    • Source wave analysis of impact force on wood based panel floor (In Japanese)
    • Nakao T, Tanaka C, and Takahashi A (1988), Source wave analysis of impact force on wood based panel floor (in Japanese), J. Soc. Mater. Sci. Jpn. 37, 565-570.
    • (1988) J. Soc. Mater. Sci. Jpn , vol.37 , pp. 565-570
    • Nakao, T.1    Tanaka, C.2    Takahashi, A.3
  • 28
    • 0032183509 scopus 로고    scopus 로고
    • Regularization of numerical inversion of the Laplace transform for the inverse analysis of impact force
    • Inoue H, Kishimoto K, Shibuya T, and Harada K (1998), Regularization of numerical inversion of the Laplace transform for the inverse analysis of impact force, JSME Int. J., Ser. A 41A, 473-480.
    • (1998) JSME Int. J., Ser. A , vol.41A , pp. 473-480
    • Inoue, H.1    Kishimoto, K.2    Shibuya, T.3    Harada, K.4
  • 29
    • 0000570697 scopus 로고
    • Analysis of discrete ill-posed problems by means of the L-curve
    • Hansen PC (1992), Analysis of discrete ill-posed problems by means of the L-curve, SIAM Rev. 34, 561-580.
    • (1992) SIAM Rev , vol.34 , pp. 561-580
    • Hansen, P.C.1
  • 31
    • 0026932101 scopus 로고
    • Estimation of impact load by inverse analysis (Optimal transfer function for inverse analysis)
    • 1351
    • Inoue H, Kishimoto K, Shibuya T, and Koizumi T (1992), Estimation of impact load by inverse analysis (Optimal transfer function for inverse analysis), JSME Int. J., SER. 1351, 420-427.
    • (1992) JSME Int. J., SER , pp. 420-427
    • Inoue, H.1    Kishimoto, K.2    Shibuya, T.3    Koizumi, T.4
  • 34
    • 0031353684 scopus 로고    scopus 로고
    • A wavelet deconvolution method for impact force identification
    • Doyle JF (1997), A wavelet deconvolution method for impact force identification, Exp. Mech. 37, 403-408.
    • (1997) Exp. Mech , vol.37 , pp. 403-408
    • Doyle, J.F.1
  • 35
    • 0021758097 scopus 로고
    • Remote impact analysis by use of propagated acceleration signals, I: Theoretical methods
    • Whiston GS (1984), Remote impact analysis by use of propagated acceleration signals, I: Theoretical methods, J. Sound Vib. 97, 35-51.
    • (1984) J. Sound Vib , vol.97 , pp. 35-51
    • Whiston, G.S.1
  • 36
    • 0021758159 scopus 로고
    • Remote impact analysis by use of propagated acceleration signals, II: Comparison between theory and experiment
    • Jordan RW and Whiston GS (1984), Remote impact analysis by use of propagated acceleration signals, II: Comparison between theory and experiment, J. Sound Vib. 97, 53-63.
    • (1984) J. Sound Vib , vol.97 , pp. 53-63
    • Jordan, R.W.1    Whiston, G.S.2
  • 37
    • 0022762689 scopus 로고
    • A measuring system for dynamic stress intensity factors using a FFT analyzer (In Japanese)
    • Kishimoto K, Kuroda M, Aoki S, and Sakata M (1986), A measuring system for dynamic stress intensity factors using a FFT analyzer (in Japanese), J. Soc. Mater. Sci. Jpn. 35, 850-853.
    • (1986) J. Soc. Mater. Sci. Jpn , vol.35 , pp. 850-853
    • Kishimoto, K.1    Kuroda, M.2    Aoki, S.3    Sakata, M.4
  • 38
    • 0342393616 scopus 로고
    • Measurement of impact load in instrumented impact testing (In Japanese)
    • Inoue H, Shibuya T, Koizumi T, and Kishimoto K (1990), Measurement of impact load in instrumented impact testing (in Japanese), J JSNDI39, 390-395.
    • (1990) J JSNDI39 , pp. 390-395
    • Inoue, H.1    Shibuya, T.2    Koizumi, T.3    Kishimoto, K.4
  • 40
    • 0002473606 scopus 로고
    • Cepstral analysis as a tool for robust processing, deverbaration and detection of transients
    • Kim JT and Lyon RH (1992), Cepstral analysis as a tool for robust processing, deverbaration and detection of transients, Mech. Syst. Signal Process. 6, 1-15.
    • (1992) Mech. Syst. Signal Process , vol.6 , pp. 1-15
    • Kim, J.T.1    Lyon, R.H.2
  • 41
    • 0027594405 scopus 로고
    • Extension of clearance and impact force estimation approaches to a beam-stop system
    • Lin SQ and Bapat CN (1993), Extension of clearance and impact force estimation approaches to a beam-stop system, J. Sound Vib. 163, 423-428.
    • (1993) J. Sound Vib , vol.163 , pp. 423-428
    • Lin, S.Q.1    Bapat, C.N.2
  • 42
    • 0004880815 scopus 로고
    • Recovery of impact signatures in machine structures
    • McCarthy DJ and Lyon RH (1995), Recovery of impact signatures in machine structures, Mech. Syst. Signal Process. 9, 465-483.
    • (1995) Mech. Syst. Signal Process , vol.9 , pp. 465-483
    • McCarthy, D.J.1    Lyon, R.H.2
  • 44
    • 85013666742 scopus 로고
    • On the inverse problem of rectangular plates subjected to elastic impact, Part I: Method development and numerical verification
    • Yen C-S and Wu E (1995), On the inverse problem of rectangular plates subjected to elastic impact, Part I: Method development and numerical verification, ASME J. Appl. Mech. 62, 692-698.
    • (1995) ASME J. Appl. Mech , vol.62 , pp. 692-698
    • Yen, C.-S.1    Wu, E.2
  • 45
    • 0026241612 scopus 로고
    • Measurement of impact load by using an inverse analysis technique (Comparison of methods for estimating the transfer function and its application to the instrumented Charpy impact test)
    • 1341
    • Inoue H, Ishida H, Kishimoto K, and Shibuya T (1991), Measurement of impact load by using an inverse analysis technique (Comparison of methods for estimating the transfer function and its application to the instrumented Charpy impact test), JSME Int. J., Ser. 1341, 453-458.
    • (1991) JSME Int. J., Ser , pp. 453-458
    • Inoue, H.1    Ishida, H.2    Kishimoto, K.3    Shibuya, T.4
  • 46
    • 0343760277 scopus 로고
    • Transfer function phase and truncated impulse response
    • Tohyama M and Lyon RH (1989), Transfer function phase and truncated impulse response, J. Acoust. Soc. Am. 86, 2025-2029.
    • (1989) J. Acoust. Soc. Am , vol.86 , pp. 2025-2029
    • Tohyama, M.1    Lyon, R.H.2
  • 47
    • 0031666132 scopus 로고    scopus 로고
    • A deconvolution method for force reconstruction in rods under axial impact
    • Wu E, Tsai C-Z, and Tseng L-H (1998), A deconvolution method for force reconstruction in rods under axial impact, J. Acoust. Soc. Am. 104 Pt 1, 1418-1426.
    • (1998) J. Acoust. Soc. Am , vol.104 , pp. 1418-1426
    • Wu, E.1    Tsai, C.-Z.2    Tseng, L.-H.3
  • 51
    • 0024928306 scopus 로고
    • Impact force identification using the general inverse technique
    • Hollandsworth PE and Busby HR (1989), Impact force identification using the general inverse technique, Int J. Impact Eng. 8, 315-322.
    • (1989) Int J. Impact Eng , vol.8 , pp. 315-322
    • Hollandsworth, P.E.1    Busby, H.R.2
  • 54
    • 0031628395 scopus 로고    scopus 로고
    • Estimation of contact force on composite plates using impact-induced strain and neural networks
    • Chandrashekhara K, Chukwujekwu Okafor A, and Jiang YP (1998), Estimation of contact force on composite plates using impact-induced strain and neural networks, Composites, Part B 29B, 363-370.
    • (1998) Composites, Part B , vol.29B , pp. 363-370
    • Chandrashekhara, K.1    Chukwujekwu Okafor, A.2    Jiang, Y.P.3
  • 55
    • 0033698462 scopus 로고    scopus 로고
    • Dynamic force calibration for measuring impact fracture toughness using the Charpy testing machine
    • Kishimoto K, Inoue H, and Shibuya T (2000), Dynamic force calibration for measuring impact fracture toughness using the Charpy testing machine, Pendulum Impact Testing: A Century of Progress, ASTM STP 1380, 253-266.
    • (2000) Pendulum Impact Testing: A Century of Progress, ASTM STP , vol.1380 , pp. 253-266
    • Kishimoto, K.1    Inoue, H.2    Shibuya, T.3
  • 57
    • 0001248857 scopus 로고
    • The inverse source problem for an oblique force on an elastic plate
    • Michaels JE and Pao Y-H (1985), The inverse source problem for an oblique force on an elastic plate, J. Acoust. Soc. Am. 77, 2005-2011.
    • (1985) J. Acoust. Soc. Am , vol.77 , pp. 2005-2011
    • Michaels, J.E.1    Pao, Y.-H.2
  • 58
    • 0022674464 scopus 로고
    • Determination of dynamic forces from wave motion measurements
    • Michaels JE and Pao Y-H (1986), Determination of dynamic forces from wave motion measurements, ASME J. Appl. Mech. 53, 61-68.
    • (1986) ASME J. Appl. Mech , vol.53 , pp. 61-68
    • Michaels, J.E.1    Pao, Y.-H.2
  • 59
    • 0025413020 scopus 로고
    • Characterization of particle impact by quantitative acoustic emission
    • Buttle DJ and Scruby CB (1990), Characterization of particle impact by quantitative acoustic emission, Wear 137, 63-90.
    • (1990) Wear , vol.137 , pp. 63-90
    • Buttle, D.J.1    Scruby, C.B.2
  • 62
    • 0027947815 scopus 로고
    • Identification of impact forces at multiple locations on laminated plates
    • Wu E, Yeh J-C, and Yen C-S (1994), Identification of impact forces at multiple locations on laminated plates, AIAA J. 32, 2433-2439.
    • (1994) AIAA J , vol.32 , pp. 2433-2439
    • Wu, E.1    Yeh, J.-C.2    Yen, C.-S.3
  • 63
    • 0023419095 scopus 로고
    • An experimental method for determining the location and time of initiation of an unknown dispersing pulse
    • Doyle JF (1987), An experimental method for determining the location and time of initiation of an unknown dispersing pulse, Exp. Mech. 27, 229-233.
    • (1987) Exp. Mech , vol.27 , pp. 229-233
    • Doyle, J.F.1
  • 64
    • 0028543052 scopus 로고
    • Identification of foreign object impact in structures using distributed sensors
    • Choi K and Chang F-K (1994), Identification of foreign object impact in structures using distributed sensors, J. Intell. Mater. Syst. Struct. 5, 864-869.
    • (1994) J. Intell. Mater. Syst. Struct , vol.5 , pp. 864-869
    • Choi, K.1    Chang, F.-K.2
  • 65
    • 0028400625 scopus 로고
    • A genetic algorithm for determining the location of structural impacts
    • Doyle JF (1994), A genetic algorithm for determining the location of structural impacts, Exp. Mech. 34, 37-44.
    • (1994) Exp. Mech , vol.34 , pp. 37-44
    • Doyle, J.F.1
  • 66
    • 0029736154 scopus 로고    scopus 로고
    • Impact force location in frame structures
    • Martin MT and Doyle JF (1996), Impact force location in frame structures, Int. J. Impact Eng. 18, 79-97.
    • (1996) Int. J. Impact Eng , vol.18 , pp. 79-97
    • Martin, M.T.1    Doyle, J.F.2
  • 67
    • 0030241294 scopus 로고    scopus 로고
    • Experimental wavelet analysis of flexural waves in beams
    • Inoue H, Kishimoto K, and Shibuya T (1996), Experimental wavelet analysis of flexural waves in beams, Exp. Mech. 36, 212-217.
    • (1996) Exp. Mech , vol.36 , pp. 212-217
    • Inoue, H.1    Kishimoto, K.2    Shibuya, T.3
  • 68
    • 84952051486 scopus 로고
    • Time-frequency analysis of dispersive waves by means of wavelet transform
    • Kishimoto K, Inoue H, Hamada M, and Shibuya T (1995), Time-frequency analysis of dispersive waves by means of wavelet transform, ASME J. Appl. Mech. 62, 841-846.
    • (1995) ASME J. Appl. Mech , vol.62 , pp. 841-846
    • Kishimoto, K.1    Inoue, H.2    Hamada, M.3    Shibuya, T.4
  • 69
    • 0031369534 scopus 로고    scopus 로고
    • Estimation of impact force and its location exerted on spacecraft (In Japanese)
    • Ohkami Y and Tanaka H (1997), Estimation of impact force and its location exerted on spacecraft (in Japanese), Trans. Jpn. Soc. Mech. Eng, Ser. C. 63C, 4246-4252.
    • (1997) Trans. Jpn. Soc. Mech. Eng, Ser. C , vol.63C , pp. 4246-4252
    • Ohkami, Y.1    Tanaka, H.2
  • 70
    • 0032202336 scopus 로고    scopus 로고
    • Identification of the impact location on a plate using wavelets
    • Gaul L and Hurlebaus S (1998), Identification of the impact location on a plate using wavelets, Mech. Syst. Signal Process. 12, 783-795.
    • (1998) Mech. Syst. Signal Process , vol.12 , pp. 783-795
    • Gaul, L.1    Hurlebaus, S.2
  • 71
    • 0026983935 scopus 로고
    • Impact force identification using extracted modal parameters and pattern matching
    • Briggs JC and Tse MK (1992), Impact force identification using extracted modal parameters and pattern matching, Int. J. Impact Eng. 12, 361-372.
    • (1992) Int. J. Impact Eng , vol.12 , pp. 361-372
    • Briggs, J.C.1    Tse, M.K.2
  • 72
    • 0040531751 scopus 로고    scopus 로고
    • Remote identification of impact forces on loosely supported tubes: Part 2—Complex vibro-impact motions
    • Antunes J, Paulino M, and Piteau P (1998), Remote identification of impact forces on loosely supported tubes: Part 2—Complex vibro-impact motions, J. Sound Vib. 215, 1043-1064.
    • (1998) J. Sound Vib , vol.215 , pp. 1043-1064
    • Antunes, J.1    Paulino, M.2    Piteau, P.3
  • 74
    • 0040039794 scopus 로고    scopus 로고
    • Remote identification of impact forces on loosely supported tubes: Part 1—Basic theory and experiments
    • De Arauijo M, Antunes, J, and Piteau P (1998), Remote identification of impact forces on loosely supported tubes: Part 1—Basic theory and experiments, J. Sound Vib. 215, 1015-1041.
    • (1998) J. Sound Vib , vol.215 , pp. 1015-1041
    • De Arauijo, M.1    Antunes, J.2    Piteau, P.3
  • 75
    • 0032296291 scopus 로고    scopus 로고
    • Identification of unknown, time-varying forces/moments in dynamics and vibration problems using a new approach to deconvolution
    • Johnson CD (1998), Identification of unknown, time-varying forces/moments in dynamics and vibration problems using a new approach to deconvolution, Shock Vib. 5, 181-197.
    • (1998) Shock Vib , vol.5 , pp. 181-197
    • Johnson, C.D.1
  • 76
    • 0032098904 scopus 로고    scopus 로고
    • A study of an inverse method for the estimation of impulsive loads
    • Ma CK, Tuan PC, Lin DC, and Liu CS (1998), A study of an inverse method for the estimation of impulsive loads, Int. J. Syst. Sci. 29, 663-672.
    • (1998) Int. J. Syst. Sci , vol.29 , pp. 663-672
    • Ma, C.K.1    Tuan, P.C.2    Lin, D.C.3    Liu, C.S.4
  • 77
    • 13344252717 scopus 로고    scopus 로고
    • Improvement of impact force estimation exerted on spacecraft and its accuracy (In Japanese)
    • Ohkami Y and Tanaka H (1998), Improvement of impact force estimation exerted on spacecraft and its accuracy (in Japanese), Trans. Jpn. Soc. Mech. Eng., Ser. C 64C, 2019-2025.
    • (1998) Trans. Jpn. Soc. Mech. Eng., Ser. C , vol.64C , pp. 2019-2025
    • Ohkami, Y.1    Tanaka, H.2
  • 78
    • 0033078598 scopus 로고    scopus 로고
    • Remote identification of impact forces on loosely supported tubes: Analysis of multi-supported systems
    • Paulino M, Antunes J, and Izquierdo P (1999), Remote identification of impact forces on loosely supported tubes: Analysis of multi-supported systems, ASME J. Pressure Vessel Technol. 121, 61-70.
    • (1999) ASME J. Pressure Vessel Technol , vol.121 , pp. 61-70
    • Paulino, M.1    Antunes, J.2    Izquierdo, P.3
  • 79
    • 0032658182 scopus 로고    scopus 로고
    • Optimal estimation of dynamic loads for multiple-input system
    • Rao Z, Shi Q, and Hagiwara I (1999), Optimal estimation of dynamic loads for multiple-input system, ASME J. Vibr. Acoust. 121, 397-401.
    • (1999) ASME J. Vibr. Acoust , vol.121 , pp. 397-401
    • Rao, Z.1    Shi, Q.2    Hagiwara, I.3
  • 80
    • 0000644630 scopus 로고    scopus 로고
    • Method for investigation of frictional properties at impact loading
    • Sundin KG and Ahrstrom, BO (1999), Method for investigation of frictional properties at impact loading, J. Sound Vib. 222, 669-677.
    • (1999) J. Sound Vib , vol.222 , pp. 669-677
    • Sundin, K.G.1    Ahrstrom, B.O.2
  • 81
    • 13344251431 scopus 로고    scopus 로고
    • Identification of an impact force by radiated sound from the impacted body (Noncontact measuring experiments of the identification by the inverse analysis) (in Japanese)
    • Tsuji T, Kawada Y, Suzuki Y, Yamaguchi T, and Noda N (1999), Identification of an impact force by radiated sound from the impacted body (Noncontact measuring experiments of the identification by the inverse analysis) (in Japanese), Trans. Jpn. Soc. Mech. Eng., Ser A 65A, 701-707
    • (1999) Trans. Jpn. Soc. Mech. Eng., Ser A , vol.65A , pp. 701-707
    • Tsuji, T.1    Kawada, Y.2    Suzuki, Y.3    Yamaguchi, T.4    Noda, N.5


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.