Mitigation of Water Fouling: Technology Status and Challenges

Advances in Heat Transfer

Volumn 31, Issue C, 1998, Pages 431-474

  Panchal, C B ^a   Knudsen, J G ^b  

^a ARGONNE NATIONAL LABORATORY   (United States)

^b OREGON STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0008337221     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(08)70244-2     Document Type: Chapter

References (79)

1. Allenman, J. E. 1981. Quantitative assessment of the effectiveness of permanent magnetic water conditioning devices. Report to Water Quality Association, July.
2. Bernardin J., and Chan S.H. Magnetic effects on simulated brine properties pertaining to magnetic water treatment. ASME HTD 164 (1991) 109-115
3. Bott T.R. Design and operation of the heat-exchange equipment for fouling conditions. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 3-12
4. Bott T.R. Fouling Notebook (1990), The Institute of Chemical Engineers, Rugby, England
5. Characklis W.G. Biofilm processes. In: Characklis W.G., and Marshall K.C. (Eds). Biofilms (1990), John Wiley, New York 195-231
6. Chenoweth J.M. Final report of the HTRI/TEMA Joint Committee to Review the Fouling Section of the TEMA Standards. Heat Transfer Engineering 11 1 (1990) 73-107
7. Chenoweth J.M. The TEMA standards fouling section: Another look. In: Panchal C. (Ed). Fouling Mmitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 61-72
8. Chow, W., J. S. Maulbetsch, and Y. G. Muddalli, 1984. Biofouling control through targeted chlorination. Power Engineering, October, 38-41.
9. Energy Information Agency. 1995. Monthly Energy Review, April.
10. Ekono, 1994. Environmental Performance Regulations and Technologies in the Pulp & Paper Industry, Ekono/Duoplan Strategic Study, Ekono, Bellevue, Washington.
11. Epstein N. Thinking about heat transfer fouling: A 5 X 5 matrix. Heat Trans. Eng. 4 (1983) 43-56
12. Epstein, N. 1997. Particle deposition and its mitigation. Paper presented at the Engineering Foundation Conference, Lucca, Italy.
13. Faltzin A.E., Garcia H., and LaCava A.I. Avoiding fouling and corrosion in water cooled heat exchangers: The expert system approach. In: Melo J.F., Bott T.R., and Bernando C.A. (Eds). Fouling Science And Technology (1988), Kluwer Academic, Dordrecht, the Netherlands 637-648
14. Flemming H. Biofilms as a particular form of microbial life. In: Flemming H., and Geeset G. (Eds). Biofouling and Biocorrosion in Industrial Water Systems (1990), Springer-Verlag, New York 1-6
15. Flemming H. Biofouling in water treatment. In: Flemming H., and Geeset G. (Eds). Biofouling and Biocorrosion in Industrial Water Systems (1990), Springer-Verlag, New York 47-80
16. Garret-Price B.A., Smith S.A., Watts R.L., Knudsen J.G., Mamer W.J., and Suitor J.W. Fouling of Heat Exchangers (1985), Noyes Publication, Park Ridge, N.J.
17. Garrett W.E., and Rabas T.J. Biofouling mitigation of plain and enhanced condenser tubes. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 177-200
18. Geesey G.G. What is biocorrosion?. In: Flemming H., and Geeset G. (Eds). Biofouling and Biocorrosion in Industrial Water Systems (1990), Springer-Verlag, New York 155-164
19. Gleadow, P., C. Hastings, and P. Lownertz, 1994. Towards the closed-cycle bleached kraft mill: Metals managment for closed cycle hardwood kraft mills. Proc. of Tappi Pulping Conference, San Diego, CA.
20. Gruber, C. E., and D. D. Carda, 1991. Performance analysis of permanent magnet type water treatment devices, Report to Water Quality Association, July.
21. Hasson D., and Branson D. The performance of a magnetic water conditioner under accelerated scaling conditions (1981), Nottingham University, U.K. Proc. Progress in the Prevention of Fouling in Industrial Plant.
22. Hasson, D. 1997. Crystallization and scaling. Paper presented at the Engineering Foundation Conference, Lucca, Italy.
23. Hays G. Fouling allowances are self-fulfilling prophecies. In Heat Transfer Equipment Fundamentals, Design, Applications, and Operating Problems. ASME HTD 108 (1989) 325-330
24. Hays, G., and J. G. Knudsen, 1997. A description of three monitors. Paper presented at the Engineering Foundation Conference, Lucca, Italy.
25. Haquet Y., Loutaty, and Patureaux T. Turbototal: A mechanical means for continuously fighting tubular heat exchanger fouling. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 503-512
26. Heat Exchange Institute. 1984. Standards for Steam Surface Condensers, 8th ed.
27. Hoory S. Use of fluidized bed for prevention of scaling in heat exchangers (in Hebrew) (1962), Technion-Israel Institute of Technology, Israel M.Sc. thesis
28. Katz, J. L. 1989. Mechanistic Study of the Effects of Magnetic Fields on Scale Formation, Department of Energy Report, DOE/ER/13446-5.
29. Kern D.Q., and Seaton R.E. A theoretical analysis of thermal surface fouling. Brit. Chem. Eng. 4 (1969) 258-262
30. Kern, W. I. 1975. Increasing heat exchanger efficiency through continuous mechanical tube maintenance. Combustion, August, 18-27.
31. Kim N., and Lee Y. A study of the pressure loss, heat transfer enhancement and fouling control in liquid fluidized heat exchanger. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 421-433
32. Klaren, D. G., and R. E. Bailie, 1989. The non-fouling fluidized bed heat exchanger. ASME Publication HTD-108, Heat Transfer Equipments Fundamentals, Design, Applications, and Operating Problems, 273-279.
33. Knudsen J.G. Fouling in heat exchangers. Heat Exchanger Design Hand Book (1984), Hemishphere Publishing, New York Section 3.17
34. Knudsen J.G. Mitigation technology trend. In: Garret-Price, et al. (Ed). Fouling of Heat Exchangers (1985), Noyes Publications, Park Ridge, N.J. 84-97
35. Knudsen, J. G., A. A. Al-Saud, T. C. Breske, and J. M. Chenoweth, 1989. Fouling characteristics of cooling tower water containing phosphate corrosion inhibitors and the scale inhibiting effects of copolymer additives. In Heat Transfer Equipment Fundamentals, Design, Applications, and Operating Problems, ASME Publication HTD-Vol. 108, 297-304.
36. Knudsen J.G., and Hays G. Use of operating conditions to mitigate fouling of heat exchangers. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 41-52
37. Knudsen J.G., and Roy B.V. In: Grigull U., Hahne E., and Stephan K. (Eds). Influence of fouling on heat transfer (1982), Hemisphere Publishing Corp, New York 269-287 Heat Transfer-1982, Proc. Seventh International Heat Transfer Conference, 6-10, September, Munich, Germany
38. Kostoglou M., Andristos N., and Karabelas A.J. Flow of supersaturated solutions in pipes: Modeling bulk precipitation and scale formation. Chem. Eng. Comm. 133 (1995) 107-131
39. Martynova O.I., Tebenekhin E.F., and Gusev. Conditions and mechanism of deposition of the solid calcium carbonate phase from aqueous solutions under the influence of a magnetic field. Kollodnyl Zhurnal 29 (1967) 292
40. Mazzola, M. S., M. G. Grothaus, M. Walch, J. Jones-Meehan, and S. L. Keever, 1995. New electrical control methods to prevent power plant fouling. Proc. Tenth International Pulsed Power Conference, IEEE, New York, 34-39.
41. McGarvey, G. B., and C. W. Turner, 1997. Synergism models for heat exchanger fouling mitigation. Paper presented at the Engineering Foundation Conference, Lucca, Italy.
42. McMullen A.S., Gough M., Gibbard I.J., and Polley G.T. Case studies of refinery fouling reduction. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 513-522
43. Mohammed M., and Hodgkiess T. Investigation of the effect of magnetic control device on calcium carbonate deposition. Desalination & Water Reuse 6 4 (1997) 11-12
44. Morese, 1990, U.S. Patent No., 943,654, July.
45. Mott I.E.C., Stickler D.J., Coakley W.T., and Bott T.R. Ultrasound in the control of biofilms in pipes. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 213-226
46. Muller-Steinhagen, H., Q. Zhao, and M. Reiss, 1997. Ion implantation-A new method of preparing low fouling metal surfaces. Paper presented at the Engineering Foundation Conference, Lucca, Italy.
47. Nordin S., and Westergren L. Practical experience of prevention of scaling by means of high-finish surfaces in evaporator tubes (1981), Lund University, Sweden Proc. International Workshop on Fundamentals and Applications of Surface Phenomena Associated with Fouling and Cleaning in Food Processing., 356-364
48. Novak L. Comparison of the Rhine river and the Aresund seawater fouling and its removal by chlorination. In Fouling in Heat Exchange Equipment. ASME HTD 17 (1981) 61-66
49. Ono Y., Monozaki K., and Takahashi M. On-stream scale removing method using newly developed anionic copolymer for cooling water systems. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 313-322
50. Panchal, C. B. et al. 1982. OTEC Biofouling-Control and Corrosion-Protection Study at the Seacoast Test Facility: 1981-1983. Argonne National Report, ANL/OTEC/TM-5.
51. Panchal, C. B. et al. 1990. OTEC Biofouling and Corrosion Study at the Natural Energy Laboratory of Hawaii: 1983-1987, Argonne National Laboratory Report, ANL/ESD-10.
52. Panchal C.B., Takahashi P.K., and Avery W. Biofouling control using ultraviolet and ultrasound treatments. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 201-212
53. Pearce, D. L. 1990. Projects for spirally-roped condenser tubes. Proc. GEN-UPGRADE 90 International Symposium, Washington, DC, Vol. 2, 7.5.1-7.5.15.
54. Perrakis, M., Andritsos, and A. J. Karabelas, 1997. Fouling database: A novel computer-aided tool. Paper presented at the Engineering Foundation Conference, Lucca, Italy.
55. Pritchard A.M. Deposition of hardness salts. In: Melo J.F., Bott T.R., and Bernando C.A. (Eds). Fouling Science and Technology (1988), Kluwer Academic, Dordrecht, the Netherlands 261-273
56. Rabas T.J., Panchal C.B., Sasscer D.S., and Schaefer R. Comparison of river-water fouling rates for spirally indented and plain tubes. Heat Transfer Engineering 14 4 (1993) 58-73
57. Rabas, T. J., and R. Schaefer, 1993. Enhanced surface condensers improve heat rates. Power Engineering, July, 36-38.
58. Rabas, T. J., and E. S. Elliott, 1993. Fouling and thermal performance characteristics of Humboldt Bay Unit 2 power-plant condenser. In Condensation and Condenser Design, ASME Publication, 509-521.
59. Rabas, T. J., R. Merring, R. Schaefer, R. Lopez-Gomez, and P. Thors, 1990. Heat-rate improvements obtained with the use of enhanced tubes in surface condensers. EPRI Condenser Technology Conference, Boston.
60. Raisen, E. 1984. The control of scale and corrosion in water systems using magnetic fields. Corrosion-84, Paper No. 117, New Orleans, LA.
61. Rautenbach R., Erdmann C., and Kolbach J.St. Fluidized bed technique in the evaporation of wastewaters with severe fouling scaling potential: Latest developments, application limitations. Desalination 81 (1991) 285-298
62. Rautenbach R., and Katz T. Survey of long time behavior and costs of industrial fluidized bed heat exchangers. Desalination 108 (1996) 335-344
63. Rautenbach, R., and J. Widua, 1995. Application of seeding to horizontal-tube film evaporators as scale prevention method. Proc. of World Congress on Desalination and Water Sciences, Abu Dhabi. 3:559-576.
64. Renfftlen R.G. On-line sponge ball cleaning of enhanced heat exchanger tubes. Fouling and Enhancement Interactions. ASME HTD 164 (1991) 55-60
65. Shinnar, R. 1962. British Patent No. 16313.
66. Someah, K. 1992. On-line tube cleaning: The basics. Chemical Engineering Progress, July, 39-45.
67. Somerscales E.F.C. Corrosion fouling. In: Melo J.F., Bott T.R., and Bernando C.A. (Eds). Fouling Science and Technology (1988), Kluwer Academic, Boston 621-636
68. Somerscales E.F.C., Ponteduro A.F., and Bergles A.E. Particulate fouling of heat transfer tubes enhanced on their inner surface. Fouling and Enhancement Interactions. ASME HTD 164 (1991) 17-28
69. Stegelman A.F., and Renfftlen R.G. On-line mechanical cleaning of heat exchangers. Hydrocarbon Processing (1983) 25-27
70. Taborek J., Aoki T.T., Ritter R.B., Palen J.W., and Knudsen J.G. Fouling: The major unresolved problem in heat transfer. Chem. Eng. Prog. 68 2 (1972) 59-67 and 68(7):69-78
71. Taborek J. Assessment of fouling research on the design of heat exchangers. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 27-40
72. Taylor R.J., and Bott T.R. Biofouling prevention and destruction using chemical biocides. In: Panchal C. (Ed). Fouling Mitigation of Industrial Heat-Exchange Equipment (1997), Begell House, New York 163-176
73. Tjoe, T., and B. Linhoff, 1986. Using pinch technology for process retrofit. Chemical Engineering, April, 47-60.
74. Vidil R., and Isdale J.D. Round table discussion: The needs of R & D. In: Bohnet M., Bott T.R., Karabelas A.J., Pilavachi P.A., Semeria R., and Vidil R. (Eds). Fouling Mechanism: Theoretical and Practical Aspects (1992), Editions Europeans Thermique ET Industrie, France
75. Watkinson A.P. Fouling of augmented heat transfer tubes. Heat Trans. Eng. 11 (1990) 57-65
76. Webb, R. L., and R. G. Renfftlen, 1985. Control of biofouling in enhanced tubes. EPRI Condenser Biofouling Control Symposium: State-of-the-Art, Lake Buena Vista, FL.
77. Webb R.L., and Kim N.-H. Particulate fouling in enhanced tubes. In Heat Transfer Equipment Fundamentals, Design, Applications, and Operating Problems. ASME HTD 108 (1989) 315-323
78. Webb R.L., and Chamra L.M. On-line cleaning of particulate fouling in enhanced tubes. In Fouling and Enhancement Interactions. ASME HTD 164 (1991) 47-54
79. Willis, A. J., and T. J. Bott, 1997, Inhibition of Pseudomonas fiuorescens biofilm development by hydrogen peroxide. Paper presented at the Engineering Foundation Conference, Lucca, Italy.