Adjustable-Speed AC Drives

Proceedings of the IEEE

Volumn 76, Issue 4, 1988, Pages 455-471

  Leonhard, Werner ^a  

^a TECHNICAL UNIVERSITY OF BRAUNSCHWEIG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0007923042     PISSN: 00189219     EISSN: 15582256     Source Type: Journal    
DOI: 10.1109/5.4430     Document Type: Article

References (88)

1. A. Abbondanti, “Method of flux control in induction motors driven by variable frequency, variable voltage supplies”, in IEEE-IAS Semicond. Power Conv. Conf., p. 177, 1977.
2. L. Abraham, “Power electronics in German railway propulsion, Proc. IEEE, this issue.
3. E. F. W. Alexanderson and A. H. Mittag, “The thyratron motor”, AIEE Trans., p. 1517, 1934.
4. Ansaldo, “SILCOVERT-A, static frequency converters for asynchronous motor variable speed drives”, brochure.
5. A. H. Beiler, “The thyration motors at the Logan plant”, AIEE Trans., 1938.
6. F. Blaschke, “The principle of field orientation as applied to the new TRANSVECTOR-closed loop control system for rotating field machines”, Siemens Rev., p. 217, 1972.
7. B. K. Bose, Ed., Adjustable Speed AC-Drive Systems. New York, NY: IEEE Press, 1981.
8. B.K. Bose, “Adjustable speed AC-drives-A technology status review”, Proc. IEEE, vol. 70, p. 116, 1982.
9. A. Brickwedde, D. Head, and H. Graham, “Microprocessor controlled 50 kVA PWM inverter drive”, in Proc. IEEE Ind. Appl. Ann. Conf., p. 666. 1981.
10. H. Bühler, Einführung in die Theorie geregelter Drehstro-mantriebe, vols. 1 und 2. Basel, Switzerland: Birkhäuser, 1977.
11. A. Busse and J. Holtz, “A digital space vector modulator for the control of a three phase power converter”, Microelectronics in power electronics and electrical drives, Darmstadt 1982, VDE Fachberichte 11, p. 189 R.
12. R. Chauprade and A. Abbondanti, “Variable speed drives: Modern concepts and approaches”, in Proc. IEEE Int. Semicond. Power Conv. Conf., p. 20, 1982.
13. R. M. Davis, “A variable speed drive that took a century and a half to develop”, Electrical Times, 1983.
14. R. Dirr, I. Neuffer, W. Schliiter,and H. Waldmann, “Neuartige elektronische Regeleinrichtungen für doppeltgespeiste Asynchronmaschinen großer Leistung”, Siemens Z., p. 362, 1971.
15. Y. Dote, “Stabilization of controlled current induction motor drive system via new nonlinear state observer”, in IEEE Ind. Elec. Contr. Inst, p. 77, 1980.
16. H. Eisenack, “Design language for microprocessor-controlled converters and converter drives”, in Proc. EPE 85, Brussels, p. 5.11.
17. Emerson Industrial Controls, “Adjustable speed drives and systems”, brochure.
18. G. Fabvier, J. Malherbe, and C. Osseland, “High power electric drives save energy”, Hydrocarbon Processing, July 1984.
19. R. Fink, P. Gumbrecht, and E. Raatz, “Steuerung und Regelung von direktumrichter-gespeisten Synchronmaschi-nen”, AEG-Mitteilungen, 1981.
20. J. D. Fischer, T. Deriaud, O. V. Bertele, and R. A. Morgan, “Direct high speed drive for a compressor train”, Drives/ Motors/Controls, 1985.
21. H. Fürsich, E. Thum, J. Hamann, and D. Köllensperger, “New converter-fed permanent-field motor”, in Proc. ICEM 86, München, p. 50.
22. R. Gabriel, W. Leonhard, and C. Nordby, “Field oriented control of a standard AC-motor using microprocessors”, IEEE Trans. Ind. Appl., p. 186, 1980.
23. R. Gabriel and W. Leonhard, “Microprocessor control of induction motor”, in Proc. Int. Semicond. Power Conv. Conf., p. 385, 1982.
24. L. J. Garces, “Parameter adaptation for the speed controlled static AC-drive with squirrel cage induction motor”, in Proc. IEEE Ind. Appl. Ann. Conf., p. 843, 1979.
25. General Electric, “GTO induction motor drive,” and “Load commutated inverter drive”, brochures.
26. V. Gelman, “High performance current source inverter drive”, in Proc. Int. Semicond. Power Conf., p. 266, 1982.
27. G. Gleissner and H. Wokusch, “Umrichtergespeiste Drehstrommotoren verdrängen den Gleischstromantrieb im oberen Leistungsbereich”, Siemens Z., p. 4, 1987.
28. G. Gölz and P. Gumbrecht, “Umrichtergespeiste Synchron-maschinen”, AEG-Mitteilungen, p. 141, 1973.
29. H. Grotstollen and G. Pfaff, “Bürstenloser Drehstrom-Ser-voantrieb mit Erregung durch Dauermagnete”, Elektrotech. Z. Ausg. A., p. 1382, 1979.
30. P. Gumbrecht and H. H. Voigt, “Cycloconverter-fed synchronous machine with microprocessor-based control system ISA85”, in Proc. Motor Conv. Conf., p. 202, 1985.
31. A. Haböck, “Digital control in power electronic equipment”, in Proc. EPE 85, Brussels, p. 24.
32. K. Hasse, “Drehzahlregelverfahren für schnelle Umrich-terantriebe mit stromrichtergespeisten Asynchron-Kurz-schlußläufermaschinen”, Regelungstechnik, p. 60, 1972.
33. G. Henneberger, “Servo drives for machine tools and robotics”, in Proc. ICEM, München, 1986, p. 21.
34. G. Henneberger, H. Härer, and W. Schleuter, “A new generation of servomotors with rare earth magnets”, in Proc. ICEM 86, München, p. 1083.
35. J. Holtz and S. Stadtfeld, “A predictive controller for stator current vector of ac-machines fed from a switched voltage source”, in Proc. Int. Power Electr. Conf., Tokyo, p. 1665, 1983.
36. M. Hombu, K. Veda, and M. Nakazato, “Current source inverters with sinusoidal inputs and outputs”, Hitachi Rev., p. 29, 1987.
37. K. Ishihara et al., “Application of new drive systems for plate mill drives”, in Proc. IEEE IAS Ann. Conf., p. 43, 1984.
38. Y. Jifuku, J. Noda, and T. Kawaguchi, “Large capacity AC variable speed drive systems for electric power and general industrial use”, Hitachi Rev., p. 21, 1987.
39. R. Jötten and P. Zimmermann, “Sub- and supersynchronous cascade with current-source inverter”, in IFACSymp. Contr. in Power Electron, and Elec. Drives, p. 337, 1983.
40. T. Irisa et al., “A novel approach on parameter self tuning method in AC servo systems”, in IFAC Symp. Contr. in Power Electron. and Elec. Drives, p. 41, 1983.
41. E. Kiel, W. Schumacher, and R. Gabriel, “PWM gate array for AC-drives”, in Proc. EPE, p. 653, 1987.
42. W. H. Koch, “Thyristor controlled pulsating field reluctance motor system”, Electr. Machines and Electro-mechanics, p. 201, 1977.
43. P. J. Lawrenson et al., “Controlled-speed switched-reluc-tance motors: Present status and future potential”, Drives/ Motors/Controls, 1982.
44. W. Leonhard, Control of Electrical Drives. New York, NY: Springer Berlin, 1985.
45. W. Leonhard, “Microcomputer control of high dynamic performance ac-drives-a survey”, Automatica p. 1, 1986.
46. R. Lessmeier, W. Schumacher, and W. Leonhard, “Microprocessor controlled ac-servo drives with synchronous or induction motors: Which is preferable?” IEEE Trans. Ind. Appl., p. 812, 1986.
47. T. A. Lipo, “Analysis and control of torque pulsations in current fed induction motor drives”, in Proc. Power Electr. Specialists Conf., 1978.
48. R. Mayer, H. Mosebach, U. Schroder, and H. Weh, “Inverter-fed multi phase reluctance machine with reduced armature reaction and improved power density”, in Proc. ICEM 86, München, p. 1138.
49. R. Merridew, L. Laftman, and Y. Mathisen, “KASKAD 8A, a new slip recovery drive providing efficient and reliable speed control”, ASEA J., p. 26, 1984.
50. A. Meyer and H. Rohrer, “High speed electrical motors for variable speed drives”, in Proc. ICEM 86, München, p. 880.
51. M. Miyazaki, A. Kuroiwa, and T. Kudor, “High performance vector control drive system by microprocessor-based current source inverter”, in IEEE IECON 84, p. 821.
52. B. Mokrytzki, “Pulse width modulated inverters for ac-motor drives”, IEEE Trans. Ind. Appl., p. 312, 1968.
53. K. Moll, “Untersynchrone Stromrichterkaskaden, VERIVERT K”, BBC-Technik, p. 459, 1987.
54. R. V. Musil, “Survey of large inverter-fed motor designs for variable speed drives”, in Proc. ICEM 86, München, p. 32.
55. A. Nabae, K. Otsuka, H Vekino, and R. Kurosawa, “An approach to flux cotrol of induction motors operated with variable-frequency power supply”, IEEE Trans. Ind. Appl., p. 342, 1980.
56. I. Ogawa, “Large capacity Scherbius systems-slip power recovery control”, Toshiba Rev., p. 17, 1985.
57. H. S. Patel and R. C. Hoft, “Generalized techniques of harmonic elimination and voltage control in thyristor inverters”, IEEE Trans. Ind. Appl., pt. I, p. 310, 1973; pt. II, p. !!666, 1974.
58. B. R. Pelly, Thyristor Phase-Controlled Converters and CyloConverters. New York, NY: Wiley, 1971.
59. G. Pfaff and A. Wick, “Direkte Stromregelung bei Drehstro-mantrieben mit Pulsumrichter, ”Regelungstechnische Praxis, p. 472, 1983.
60. A. B. Plunkett, “Direct flux and torque regulation in a PWM induction motor drive”, IEEE Trans. Ind. Appl., p. 139, 1977.
61. A. Pollmann, “A digital PulseWidth modulator employing advanced modulation techniques”, IEEE Trans. Ind. Appl., p. 409, 1983.
62. W. Richter, “Microprocessor controlled inverter-fed synchronous motor drive”, in Proc. IEE Conf. on Variable Speed Drives, p. 161, 1979.
63. J. Rosa, “Utilization and rating of machine commutated inverter synchronous motor drives”, IEEE Trans. Ind. Appl., p. 155, 1979.
64. K. Saito et al., “A multiprocessor-based fully digital ac-drive system for rolling mills”, in Proc. IAS Ann. Conf., p. 36, 1986.
65. K. Saito, H. Kiwaki, and I. Watanabe, “State-of-the art AC-drive systems”, Hitachi Rev., p. 1, 1987.
66. T. Salzmann and H. Wokusch, “Direktumrichter-Antrieb fur große Leistungen und hohe dynamische Anforderungen”, Siemens-Energietechnik, p. 409, 1980.
67. N. Sato, “A brushless dc-motor with armature induced voltage commutation”, IEEE-Trans. Ind. Appl., p. 1485, 1971.
68. K. Sato, T. Sukegawa, M. Yamashina, and T. Okunyama, “AC motor drive system for rolling mills”, Hitachi Rev., p. 13, 1987.
69. N. Sawaki and N. Sato, “Steadystate and stability analysis of induction motor driven by current source inverter”, IEEE Trans. Ind. Appl., p. 244, 1977.
70. J. Schörner, “Speed controlled industrial drives”, in Proc. ICEM 86, München, p. 40.
71. W. Schumacher and W. Leonhard, “Transistor-fed AC-servo drive with microprocessor control”, in Proc. Int. Power Electr. Conf., Tokyo, p. 1465, 1983.
72. A. Schönung and H. Stemmler, “Static frequency changers with subharmonic control in conjunction with reversible speed drives”, BBC Rev., p. 555, 1964.
73. H. E. Schweickardt, H. Kobi, and A. S. Mitchell, “12MW/6000 RPM variable speed load commutated inverter drives for Matimba power station”, in Proc. Int. Conf. on Large High Voltage Electric Systems, pp. 11-15, 1986.
74. D. Singh and R. H. Hoft, “Microcomputer-controlled single phase cycloconverter”, in Proc. IEEE-IECI Conf., p. 233, 1978.
75. J. M. Stephenson, P. J. Lawrenson, and N. N. Fulton, “High power switched reluctance drives”, in Proc. ICEM 86, München, p. 1052.
76. K. Sugi et al., “A microcomputer based high capacity cycloconverter drive for main rolling mill”, in Proc. Int. Power Electr. Conf., Tokyo, p. 744, 1983.
77. J. Tamura, S. Tanaka, and S. Tadakuma, “Control method and upper limit of output frequency in circulating current type cycloconverter”, in Proc. IEEE Semicond. Power Conv. Conf., p. 313, 1982.
78. H. Tanaka and T. Kuga, “2000 kW-8000 RPM very high speed induction motor drive system”, in Proc. IEEE IAS Ann. Conf., p. 676, 1985.
79. L. Terens, J. Bommeli, and K. Peters, “Der Direktumrichter- Synchronmotor”, BBC-Mitteilungen, p. 122, 1982.
80. F. G. Turnbull, “Selected harmonics reduction in static DC- AC-inverters”, IEEE Trans. Comm. Electr., p. 374, 1964.
81. J. D. van Wyk, H.-C. Skudelny, and A. Müller-Hellmann, “Power electronics, control of the electromechanical energy conversion process and some applications”, Proc. Inst. Elec. Eng., p. 369, 1986.
82. L. H. Walker and P. M. Espelage, “A high performance con- trolled-current inverter drive”, IEEE Trans. Ind. Appl., p. 193, 1980.
83. O. Warnecke, “Einsatz einer doppelt-gespeisten Asynchron- maschine in der grofcen Windkraftanlage Growian”, Siemens-Energietechnik, p. 364, 1983.
84. U. Waschatz, “Adaptive control of electrical drives”, Microelectronics in Power Electronics and Electrical Drives, Darmstadt, 1982, ETG-Fachberichte 11, p. 135.
85. H. Weh, “Hochausgenutzte elektrische Maschinen mit Permanenterregung”, Elektrotech. Z., p. 219, 1982.
86. H. W. Weiss, “Adjustable speed AC-drive systems for pump and compressor applications”, IEEE Trans. Ind. Appl., p. 162, 1975.
87. Westinghouse, “Adjustable frequency ac drive systems”, brochure.
88. S. Yamamura, AC-Motor for High Performance Applications. New York, NY: Marcel Dekker, 1986.