Modeling of diesel spray impingement on a flat wall

KSME International Journal

Volumn 14, Issue 7, 2000, Pages 796-806

  Lee, Seong Hyuk ^b   Ryou, Hong Sun ^a  

^a Chung Ang University   (South Korea)

^b NONE

Author keywords

Deposition; Diesel engines; Impingement; Rebound; Splash; Sprays

Indexed keywords

EID: 0007283638     PISSN: 12264865     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF03184466     Document Type: Article

References (25)

1. Arcoumanis C. and Chang, J. C., 1994, "Flow and Heat Transfer Characteristics of Impinging Transient Diesel Sprays," SAE940678.
2. Bai, C and Gosman, A. D., 1995, "Development of Methodology for Spray Impingement Simulation," SAE950283.
3. Eckhause, J. E. and Reitz, R. D., 1995, "Modeling Heat Transfer to Impinging Fuel Sprays in Direct-Injection Engines," Atomization and Sprays, Vol 5, pp. 213-242.
4. Fujimoto, H., Senda, J., Nagae, M., Hashimoto, A., Saito, M. and Katsura, N., 1990, "Characteristics of a Diesel Spray Impinging on a Flat Wall," COMODIA 90 Proceedings of International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, pp. 193-198, Kyoto, Japan.
5. Gonzalez, M. A., Borman, G. L. and Reitz, R. D., 1991, "A Study of Diesel Cold Starting Using Both Cycle Analysis and Multidimensional Calculations," SAE910180.
6. Guerrassi, N. and Champoussin, J. C., 1996, "Experimental Study and Modeling of Diesel Spray/Wall Impingement," SAE960864.
7. Katsura, N., Saito, M., Senda, J. and Fujimoto, H., 1989, "Characteristics of a Diesel Spray Impinging on a Flat Wall," SAE890264.
8. Kolpakov, A. V., Romanov, K. V. and Titova, E. I., 1985, "Calculation of the Rebound Condition for Colliding Drops of Sharply Different Sizes," Kolloidn. Zh., Vol. 47, p. 953.
9. Lee, S. H., Ryou, H. S., and Chae, S., 1999, "Development of a New Spray/Wall Interaction Model," 2nd International Symposium on Two-Phase Flow Modeling and Experimentation, Vol. 3, pp. 1915-1999, Pisa, Italy, 23-26.
10. Matsumoto, S. and Saito, S., 1970, "On the Mechanism of Suspension of Particles in Horizontal Conveying : Monte Carlo Simulation Based on the Irregular Bouncing Model," J. Chem. Engng. Japan, Vol. 3, pp. 83-92.
11. Mundo, C., Sommerfeld, M. and Tropea, C., 1995, "Droplet-Wall Collisions : Experimental Studies of the Deformation and Breakup Process," Int. J. Multiphase Flow, Vol. 21, pp. 151 -173.
12. Mundo, C, Sommerfeld, M. and Tropea, C., 1998, "On the Modeling of Liquid Sprays Impinging on Surfaces," Atomization and Sprays, Vol. 8, pp. 625-652.
13. Naber, J. D. and Farrell, P., 1993, "Hydrodynamics of Droplet Impingement on a Heated Surface," SAE930919.
14. Naber, J. D. and Reitz, R. D., 1988, "Modeling Engine Spray/Wall Impingement," SAE880107.
15. O'Rourke, P. J., 1981, Collective Drop Effects on Vaporizing Liquid Sprays, Ph. D Thesis of Princeton Univ.
16. Park, K., 1994, Development of a Non-Orthogonal-Grid Computer Code for the Optimization of Direct-Injection Diesel Engine Combustion Chamber Shapes, Ph. D. Thesis, UMIST, UK.
17. Reitz, R. D., 1987, "Modeling Atomization Processes in High-Pressure Vaporizing Sprays," Atomization and Spray Technology, Vol. 3, pp. 309-337.
18. Reitz, R. D. and Diwakar, R., 1987, "Structure of High-Pressure Fuel Sprays," SAE870598.
19. Reynolds, W. C., 1980, Modeling of Fluid Motions in Engines-an Introductory Overview, in Combustion Modeling in Reciprocating Engines, ed. J. N. Mattavi and C. A. Amann, Plenum Press, NY.
20. Saito, A., Kawamura, K., Watanabe, S., Takahashi, T. and Tuzuki, N., 1993, "Analysis of Impinging Spray Characteristics under High-Pressure Fuel Injection (1st Report, Measurements of Impinging Spray Characteristics)," Trans. of Jap. Soc. Mech. Engg., Part. B, Vol. 59, pp. 3290-3295.
21. Senda, J., Kanda, T., Al-Roub, M., Farrell, P. V., Fukami, T. and Fujimoto, H., 1997, "Modeling Spray Impingement Considering Fuel Film Formation on the Wall," SAE970047.
22. Stanton, D. W. and Rutland, C. J., 1996, "Modeling Fuel Film Formation and Wall Interaction in Diesel Engines," SAE960628.
23. Watkins, A. P. and Wang, D. M., 1990, "A New Model for Diesel Spray Impaction on Walls and Comparison with Experiment," COMODIA 90 Proceedings of International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, pp. 243-248, Kyoto, Japan.
24. Wachters, L. H. J and Westerling, N. A. J., 1966, "The Heat Transfer From a Hot Wall to Impinging Water Drops in a Spherical State," Chem. Eng. Sci., Vol. 21, pp. 1047-1056.
25. Yarin, A. L. and Weiss, D. A., 1995, "Impact of Drops on Solid Surfaces : Self-Similar Capillary Waves, and Splashing as a New Type of Kinematic Discontinuity," J. Fluid Mech., Vol. 283, pp. 141-173.