ANSI/AWS A5.1-91 E6013 rutile electrodes: The effect of wollastonite

Welding Journal (Miami, Fla)

Volumn 76, Issue 12, 1997, Pages 498-s

  De Rissone, N M R ^a   Bott, I D S ^b   Jorge, J C F ^c   Corvalan P ^d   Surian, E ^e  

^a UNIVERSIDAD TECNOLÓGICA NACIONAL   (Argentina)

^b PONTIFICAL CATHOLIC UNIVERSITY OF RIO DE JANEIRO   (Brazil)

^c CEFET   (Brazil)

^d Research and Development   (Argentina)

^e Independent Consultant   (Argentina)

Author keywords

Calcium Carbonate; Coating Formulation; E6013; Mechanical Properties; Microstructure; Rutile Electrodes; Slag Basicity; SMAW; Wollastonite

Indexed keywords

EID: 0007192991     PISSN: 00432296     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (46)

1. Myazaki, T. 1988. Flux Cored Wires for Robots. Hitachi Zosen Corp. Ariabe Works, IIW Doc XII-1084-88.
2. Timerman, R., and de Vedia, L. 1991. Welding in Latinoamerica. Conferencia Internacional del Southafrican Welding Institute: Towards Cheaper Welding. Pretoria, South Africa.
3. Taylor, D. S. 1990. The role of MMA welding in 1990. Welding and Metal Fabrication, May, pp. 7-9.
4. Evans, G. 1990. Factors affecting the microstructure and properties of C-Mn all-weld-metal deposits. Weld. Research Abroad, WRC, 28.
5. Evans, G. 1990. The Effect of Alloying Elements on the Microstructure and Properties of Ferritic All-Weld-Metal Deposits. IIW Doc. II-A-817-90.
6. Taylor, D. S. 1982. The effect of manganese on the toughness of E7016 type weld metal. Welding and Metal Fabrication, 50(9): 452-460.
7. Surian, E., and Boniszewski, T. 1992. Effect of manganese and type of current on the properties and microstructure of all-weld-metal deposited with E7016-1 electrodes. Welding Journal 71(9): 348-s to 363-s.
8. Surian, E., Maraniello, E., and Boniszewski, T. 1995. The effect of carbon in E7024 SMAW electrode all weld metal. IIW-IIS Doc. II-A-905-94. Welding Journal 74(8): 279-s to 288-s.
9. Ramini de Rissone, N. M., Corvalan, P., and Surian, E. 1995. The effect of the Variation of the Slag Basicity on an AWS A5.1-91 E6013 Type Electrode. IIW Doc. II-A-929-94 (II-1262-95).
10. Boniszewski, T., Evans, G. M., and Hart, P. H. M. 1995. Studies of AWS E6013 Rutile Electrodes. Part 1: Effects of Calcium Carbonate. IIW Doc. II-A-931-94 (II-1263-95).
11. Boniszewski, T., and Evans, G. M. 1995. Studies of AWS Rutile Electrodes. Part 2: Changes in Toughness at Constant Strength. IIW Doc. II-A-940-95 (II-A-1263-95).
12. Boniszewski, T., and Evans, G. M. 1995. Studies of AWS Rutile Electrodes. Part 3: Deoxidation with Silicon. IIW Doc. II-A-948-95.
13. Boniszewski, T., and Colvin, P. 1995. Studies of AWS E6013 Rutile Electrodes. Part 4: Deoxidation with Magnesium. IIW Doc. II-A-949-95.
14. Rules and regulations for the classification of ships. Lloyd's Register of Shipping, January 1994 Edition.
15. Ibarra, S., Olson, D. L., and Grubbs, C. E. 1989. Underwater wet welding of higher strength offshore steels. OTC 5889, pp. 277-282, 21st OTC, Houston Tex., May 1-4.
16. Sanchez-Osio, A., Liu, S., Olson D. L., and Ibarra, S. 1993. Underwater wet welding consumables for offshore applications. 12th International Conference of Offshore Mechanics and Arctic Engineering. Book No. G0679A-1993.
17. Tuliani, S. S., Boniszewski, T., and Eaton, N. F. 1969. Notch toughness of commercial submerged-arc weld metal. Welding Met. Fab., Aug., Vol. 37, pp 327-339.
18. ISO 2560-1973(E), Covered Electrodes for Manual Arc Welding of Mild Steel and Low Alloy Steel - Code of Symbols for Identification.
19. Schnadt, H. M., and Leinhard, E. W. 1963. Experimental Investigation of the Sharp-Notch Behaviour of 60 Steels at Different Temperature and Strain Rates. IIW-IIS Doc. 196-343-63.
20. Guide to the Light Microscope Examination of Ferrite Steel Weld Metals. 1988. IIW Doc. IX-1533-88.
21. Andrews, K. W. 1973. Physical Metallurgy, Techniques and Applications, Vol. II. Ed. George Allen. Unwin Ltd. p. 67.
22. IIW Commission II, Arc: Welding. 1991. Measurement of Hydrogen in Ferritic Arc Weld Metal. IIW Doc. II-1155-91, The Hague 1991 Edition. Draft IIW/ISO Standard.
23. Losano, L. G., Raiter, V. E., and Boniszewski, T. 1989. Effect of the Use of Different Types of Wires on the Microstructure and Mechanical Properties of Basic Electrode Deposits. IIW Doc. II-A-792-89.
24. Eagar, T. W. 1978. Sources of weld metal oxygen contamination during submerged arc welding. Welding Journal 57 (3): 76-s to 80-s.
25. Blunt, F. J. 1995. Prediction of Weld Metal Area and Chemical Composition in C-Mn Steels: A Literature Survey. IIW Doc. II-A-956-95.
26. Svensson, L. E., and Gretoft, B. 1990. Microstructure and impact toughness of C-Mn weld metals. Welding Journal 69(12): 454-s to 461-s.
27. Ferrante, M., and Farrar, R. A. 1982. The role of oxygen-rich inclusions in determining the microstructure of weld metal deposits. Journal of Material Sciences 17: 3293-3298.
28. Harrison P. L., and Farrar, R. A. 1981. Influence of oxygen-rich inclusions on the austenite to ferrite phase transformation in HSLA steel weld metals. Journal of Material Sciences, Vol. 16, p. 2218s.
29. Liu, S., and Olson, D. L. 1986. The role of inclusions in controlling HSLA steel weld microstructure. Welding Journal 65(6): 139-s to 149-s.
30. Farrar, R. A., Zhang, Z., Bannister, S. R., and Barritte, G. S. 1993. The effect of prior austenite grain size on the transformation behaviour of C-Mn-Ni weld metal. Journal of Material Science. 28: 1385-1390.
31. Ricks, R. A., Howell, P. R., and Barritte, G. S. 1982. The nature of acicular ferrite in HSLA steel weld metals. Journal of Material Science, 17: 732-740.
32. Cochrane, R. C. 1982. Weld metal microstructures: A State of the Art Review. IIW Doc. IX-1248-82.
33. Jorge, J. C. F., Souza, L. F. G., and Rebello, J. M. A. 1993. A contribution to the study of the relationship toughness-microstructure of C-Mn weld metal. Proceedings of the XIX Encontro Nacional de Tecnologia da Soldagem, Brazil. pp. 1 -19 (in Portuguese).
34. Jorge, J. C. F., Rebello, J. M. A., and Evans, G. M. 1993. Microstructure and Toughness Relationship in C-Mn-Cr All Weld Metal Deposits. IIW-Doc. II-A-880-93.
35. Zeeman, A., and Rebello, J. M. A. 1992. Microstructure and Toughness Relationship in C-Mn-Ni All Weld Metal Deposits. IIW-Doc. II-A-858-92.
36. Paranhos, R. P. R., and Rebello, J. M. A. 1984. Toughness-microstructure relationship of a C-Mn weld metal obtained from submerged arc multi-run welds. Proceedings of the X ENTS, pp. 95-115 (in Portuguese).
37. Abson, D. J., and Pargeter, R. J. 1987. Factors Influencing the As-Deposited Strength, Microstructure and Toughness of Manual Arc Welds Suitable for C-Mn Steel Fabrication. IIW Doc. II-1092-87.
38. Surian, E. S., and Boniszewski, T. 1992. Effect of oxygen content on Charpy V-notch toughness in 3% Ni steel SMA weld metal. Welding Journal 71(7): 263-s to 268-s.
39. Klunken, O., and Grong, O. 1989. Mechanisms of inclusion formation in Al-Ti-Si-Mn deoxidised steel weld metals. Metall. Trans. A. Vol. 20A, August, pp. 1335-1349.
40. Babu, S. S., David, S. A., Vitek, J. M., Mundra, K., and DebRoy, T. 1995. Development of macro and microstructures of carbon-manganese low alloy steel weld metals: inclusion formation. Materials Sci. Technology, Vol. 11, Feb., pp. 186-199.
41. Kayali, S., Colbert, J. M., and Kerr, H. W. 1982. Observation of inclusions and acicular ferrite nucleation in submerged arc HSLA welds. Journal of Materials Science Letters, Vol 2, pp. 126-128.
42. Ferrant, M., and Farrar, R. A. 1982. The role of oxygen rich inclusions in determining the microstructure of weld metal deposits. Journal of Materials Science, Vol 17, pp. 3293-3298.
43. Grong, O., and Matlock, D. K. 1986. Microstructural development in mild and low-alloy steel weld metals, Int. Metals Review, 31(1): 27-48.
44. International Standard ISO 3690-1977/Addendum 2. Published 1983/09/15.
45. Boniszewski, T. 1979. Manual metal arc welding - old process, new developments. Part II: understanding MMA electrodes. The Metallurgist and Materials Technology, 11(11): 640-643.
46. Pokhodnya, I. K., et al. 1975. Effects of the welding conditions, and the temperature at which rutile-coated electrodes are baked, on porosity in welds. Avt. Svarka, No. 8, pp. 34-37.