Environmental Factors in the Stress Corrosion Cracking of Type 316L Stainless Steel and Alloy 825 in Chloride Solutions

Corrosion (Houston)

Volumn 52, Issue 3, 1996, Pages 194-203

  Cragnolino, G ^a   Dunn, D S ^a   Sridhar, N ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

Alloy 825; Chloride; Corrosion potential; Nuclear waste; Pitting; Repassivation potential; Slow strain rate test; Stainless steel; Stress corrosion cracking; Type 316L stainless steel; U bend testing

Indexed keywords

CHLORINE; ENVIRONMENTAL IMPACT; GEOLOGICAL REPOSITORIES; INTERFACES (MATERIALS); MECHANICAL TESTING; NICKEL ALLOYS; PASSIVATION; PITTING; RADIOACTIVE WASTES; STAINLESS STEEL; STRAIN RATE; THERMAL EFFECTS;

ALLOY 825; CORROSION POTENTIAL; REPASSIVATION POTENTIAL; SLOW STRAIN RATE TEST; THIOSULFATE; U BEND TEST; VAPOR SOLUTION INTERFACE;

STRESS CORROSION CRACKING;

EID: 0006365914     PISSN: 00109312     EISSN: None     Source Type: Journal    
DOI: 10.5006/1.3292114     Document Type: Article

References (26)

1. U.S. Department of Energy, "MPC Implementation Program Conceptual Design Phase, Volume 1 - MPC Conceptual Design Summary Report," DOC ID: A20000000-00811-5705-00001, WBS: 3.1.07 (Washington, DC: U.S. Department of Energy, Office of Civilian Radioactive Waste Management, 1993).
2. T.A. Buschek, D.G. Wilder, J.J. Nitao, "Large-Scale In Situ Heater Tests for Hydrothermal Characterization at Yucca Mountain," in High-Level Radioactive Waste Management, Proc. 4th Annual Intl. Conf. (La Grange Park, IL: American Nuclear Society, 1993), p. 1,854-1,872.
3. J.A. Beavers, N.G. Thompson, C.L. Durr, "Pitting, Galvanic, and Long-Term Corrosion Studies on Candidate Container Alloys for the Tuff Repository," NUREG/CR-5709 (Columbus, OH: Cortest Columbus Technologies Inc., 1992).
4. W.C. Patrick, "Spent Fuel Test - Climax: An Evaluation of the Technical Feasibility of Geologic Storage of Spent Nuclear Fuel in Granite -Final Report," UCRL-53702 (Livermore, CA: Lawrence Livermore National Laboratory, 1986).
5. R.M. Zimmerman, R.L. Schuch, D.S. Mason, M.L. Wilson, M.E. Hall, M.P. Board, R.P. Bellman, M.P. Blanford, "Final Report: G-Tunnel Heated Block Experiment," SAND84-2620, (Albuquerque, NM: Sandia National Laboratories, 1986).
6. A.L. Ramirez, ed., "Prototype Engineered Barrier System Field Test (PEBSFT) Final Report UCRL-ID-106159" (Livermore, CA: Lawrence Livermore National Laboratory, 1991).
7. T. Abraham, H. Jain, P. Soo, "Stress Corrosion Cracking Tests on High-Level Waste Container Materials in Simulated Tuff Repository," NUREG/CR-4619 (Washington, DC: Nuclear Regulatory Commission, 1986).
8. J.C. Farmer, G.E. Gdowski, R.D. McCright, H.S. Ahluwalia, Nucl. Eng. Design 129 (1991): p. 57-88.
9. G.A. Cragnolino, N. Sridhar. "A Review of Stress Corrosion Cracking of High-Level Nuclear Waste Container Materials -1," CNWRA 92-021 (San Antonio, TX: Center for Nuclear Waste Regulatory Analyses, 1992).
10. J.A. Beavers, G.H. Koch, Corrosion 48 (1992): p. 256-264.
11. Annual Book of ASTM Standards, "Wear and Corrosion, Metal Corrosion," vol. 03.02 (West Conshohocken, PA: ASTM, 1994), p. 95-103.
12. N. Sridhar, G.A. Cragnolino, Corrosion 49 (1993): p. 885-894.
13. G.A. Cragnolino, D.S. Dunn, N. Sridhar, "Environmental Effects on Stress Corrosion Cracking of the Type 316L Stainless Steel and Alloy 825 as High-Level Nuclear Waste Container Materials," CNWRA 94-028 (San Antonio, TX: Center for Nuclear Waste Regulatory Analyses, 1994).
14. S.E. Lott, R.C. Alkire, J. Electrochem. Soc. 136 (1989): p. 973-979.
15. G. Geesey, "A Review of the Potential for Microbially Influenced Corrosion of High-Level Nuclear Waste Containers," G.A. Cragnolino, ed., CNWRA 93-014 (San Antonio, TX: Center for Nuclear Waste Regulatory Analyses, 1993).
16. M. Takano, Corrosion 30 (1974): p. 441-446.
17. F. Stalder, D.J. Duquette, Corrosion 33 (1977): p. 67-72.
18. C. Manfredi, I.A. Maier, J.R. Galvele, Corros. Sci. 27 (1987): p. 887-903.
19. G.S. Duffo, I.A. Maier, J.R. Galvele, Corros. Sci. 28 (1988): p. 1,003-1,018.
20. H. Okada, Y. Hosio, S. Abe, Corrosion 27 (1971): p. 424-428.
21. K. Tamaki, S. Tsujikawa, Y. Hisamatsu, "Development of a New Test Method for Chloride Stress Corrosion Cracking of Stainless Steel in Dilute NaCl Solutions," in Advances in Localized Corrosion, eds. H.S. Isaacs, U. Bertocci, J. Kruger, S. Smialowska (Houston, TX: NACE, 1990), p. 207-214.
22. S. Tsujikawa, T. Shinohara, W. Lichang, "Spot-Welded Specimen Potentiostatically Kept Just Above the Crevice Repassivation Potential to Evaluate Stress Corrosion Cracking susceptibility of Improved Type 304 Stainless Steels in NaCl Solutions," in Applications of Accelerated Corrosion Tests to Service Life Prediction of Materials, eds. G. Cragnolino, N. Sridhar, ASTM STP 1194 (Philadelphia, PA: ASTM, 1994), p. 340-354.
23. G. Nakayama, H. Wakamatsu, M. Akashi, "Effects of Chloride, Bromide, and Thiosulfate Ions on the Critical Conditions for Crevice Corrosion of Several Stainless Alloys as a Material for Geological Disposal Packages for Nuclear Waste," in Scientific Basis for Nuclear Waste Management XVI, eds. C.G. Interrante, R.T. Pabalan (Pittsburgh, PA: Materials Research Society, 1993), pp. 294, 323-328, 1,993.
24. N. Sridhar, G.A. Cragnolino, "Stress Corrosion Cracking of Nickel-Based Alloys," in Stress Corrosion Cracking, Materials Performance and Evaluation, ed. R.H. Jones (Materials Park, OH: ASM Int., 1992), p. 131-179.
25. S. Tsujikawa, A. Miyasaka, M. Uedo, S. Ando, T. Shibata, T. Haruna, M. Katahira, Y. Yamane, T. Aoki, T. Yamada, Corrosion 49 (1993): p. 409-419.
26. D.S. Dunn, N. Sridhar, G.A. Cragnolino, Corrosion 52 (1996): p. 115.