Capacitance probe measurement technique for local particle volume concentration in circulating fluidized bed combustors

Journal of Chemical Engineering of Japan

Volumn 29, Issue 4, 1996, Pages 594-602

  Hage, Bernd ^a   Werther, Joachim ^a   Narukawa, Kimihito ^b   Mori, Shigekatsu ^b  

^a HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

^b NAGOYA UNIVERSITY   (Japan)

Author keywords

Capacitance Probe; Circulating Fluidized Bed; Fluidized Bed Combustion; Sewage Sludge; Solids Volume Concentration

Indexed keywords

EID: 0005991907     PISSN: 00219592     EISSN: None     Source Type: Journal    
DOI: 10.1252/jcej.29.594     Document Type: Article

References (34)

1. Acree Riley, C.; M. S. Thesis, Cornell University, USA (1989)
2. Almstedt A. E. and E. Olsson; Proc. 7th Int. FBC Conf., Philadelphia p. 89-98 (1982)
3. Bakker P. J. and P. M. Heertjes; "Porosity Determination in a Fluidized Bed," Brit. Chem. Engng., 10, 524-529 (1958)
4. Bartels, J., P. Ten Bruggencate, H. Hausen, K.-H. Hellwege, K. Schäfer and E. Schmidt(eds.); "Landolt-Börnstein, Zahlenwerte und Funktionen aus Physik, Chemie, Astronomie Geophysik und Technik II," 6, p. 502+890 Springer, Berlin, Heidelberg, New York, Germany (1959)
5. Berkelmann, K.-G. and U. Renz; "Gleichzeitge Messung von Partikelgeschwindigkeit und Partikelgröße im Freiraum einer Kohlen-Wirbelschicht," Chem.-Ing.-Tech, 2, 168-169 (1989)
6. Boelens G., F. Liefhebber and C. W. J. van Koppen; "A High Temperature Impedance Probe for Local Porosity Measurements in a Fluidized Bed Combustor," Chem. Eng. Sci., 40, 3, 365-373 (1985)
7. Brereton C. M. H. and J. R. Grace; "Microstructural Aspects of the Behavior of Circulating Fluidized Beds," Chem. Eng. Sci., 48, 14, 2565-2572, (1993)
8. Gitzen W. H. (ed.); "Alumina as a Ceramic Material," The American Ceramic Society, Chicago, USA, p. 78-80 (1970)
9. Glicksman L. R., D. Westphalen, K. Woloshun, T. Ebert, K. Roth, M. Lints, C. M. H. Brereton and J. R. Grace; Anthony E. J. (ed.), Proc. 11th Int. Conf. on Fluidized Bed Combustion, ASME, Montreal, Canada, 3, 1169-1176 (1991)
10. Gonzalez, A., J. Chaouki, A. Chehbouni, C. Guy and D. Klvana; Preprints Fluidization VIII Conf., p. 681-688, Tours, France (1995)
11. Grace, J. R. and J. Tuot; "Theory For Cluster Formation in Vertically Conveyed Suspensions of Intermediate Density Trans," Trans. IChemE, 57, 49-54 (1979)
12. Grace, J. R., J. Zhao, R. Wu, R. Senior, R. Legros, C. M. H. Brereton and J. C. Lim; Proc. Workshop on Material Issues in Circulating Fluidized Bed Combustors, EPRI, USA, 10, 1-21 (1990)
13. Hartge, E. U., D. Rensner and J. Werther; Preprints PARTEC 4th Europ. Symp. Particle Characterization, Neurnberg, Germany, 617-634 (1989)
14. Horio, M., K. Morishita, O. Tachibana and N. Murata; in CFB II (P. Basu, J. F. Large (eds.)), Pergamon Press, Compiegne, France, 147-154 (1988)
15. Horio, M.; Proc. 2nd Int. Conf. Multiphase Flow '95-Kyoto, 3, FB1-1-FB1-12, Japan (1995)
16. Johnsson H. and F. Johnsson; Report A 92-204, ISSN 0281-0034, Chalmers University of Technology, Sweden (1992)
17. Kruse, M., H. Schoenfelder and J. Werther; "A Two-Dimentional Model for Gas Mixing in the Upper Dilute Zone of a Circulating Fluidized Bed," Can. J. Chem. Eng., 73, 5, 620-634 (1995)
18. Lancia A., R. Nigro and G. Volpicelli; "Transition From Slugging to Turbulent Flow Regimes in Fluidized Beds Detected by Means of Capacitance Probes," Powder Technol., 56, 49-56 (1988)
19. Levy, Y.; "LDA Technique for Measurements in Freeboards of Fluidized Beds," AIChE J., 32, 9, 1579-1583 (1986)
20. Louge, M. and M. Opie; "Measurements of the Effective Dielectric Permittivity of Suspensions," Powder Technology, 62, 85-94 (1990)
21. Louge M.; in: "Circulating Fluidized Beds" (eds.: J. R. Grace, A. Avidan, T. M. Knowlton), London, UK, Chapman & Hall (1996)
22. Malos J., N. R. Heckenberg, E. W. Dearden, Y. O. Chong and V. Rudolph; "Initial Tests an a Microwave Monitor for Industrial Fluidized Beds," Powder Technol., 78, 287-290 (1994)
23. Pugsley T. and F. Berruti; paper submitted to Powder Technol. (1995)
24. Rensner D., E. U. Hartge and J. Werther; Proc. 1st Int. Conf. on Multiphase Flow, Tsukuba, Japan, 2, 255-258 (1991)
25. Rössel Messtechnik GmBH & Co.; Werne, Germany (1995)
26. Soong C. H., K. Tuzla and J. Chen; Preprints Fluidization VIII, 1-8, Tours, France (1995)
27. Uchida S., S. Okamura and T. Katsumata; "Measurement of Longitudinal Distribution of Solids Holdup in a Three-phase Fluidized Bed by Ultrasonic Technique," Can. J. Chem. Eng., 67, 1, 166-169 (1989)
28. Weimer A. W., D. C. Gyure and D. E. Clough; "Application of Gamma-Radiation Density Gauge for Determining Hydrodynamic Properties of Fluidized Beds," Powder Technol., 44, 179-194 (1985)
29. Werdermann C. and J. Werther; "Heat Transfer in Large Scale Fluidized Bed Combustors of Different Sizes," Proc. CFB IV, 521-528 (1993)
30. Werther J. and B. Hage; "A Fibre-optical Sensor for High Temperature Application in Fluidized Bed Combustion," Preprints Fluidization VIII, 689-696 (1995)
31. Werther J. and J. Wein; "Expansion Behavior of Gas Fluidized Beds in the Turbulent Regime," AIChE Symp., Ser 301, 90, 31-44 (1994)
32. Werther J.; "Fluid Mechanics of Large Scale CFB Units," Proc. CFB IV, 1-11 (1993)
33. Werther, J. and O. Molerus; "The Local Structure of Gas Fluidized Beds-I. A Statistically Based Measuring System," Int. J. Multiphase Flow, 1, 103-122 (1973)
34. Wiener, O.; "Theorie des Mischkörpers für das Feld der Stationären Strömung," Abhandl. Sächs. Ges. Wiss. Math. Phys. Kl., 509-598 (1912)