Creep life of ceramic components using a finite-element-based integrated design program (CARES/CREEP)

Journal of Engineering for Gas Turbines and Power

Volumn 120, Issue 1, 1998, Pages 162-171

  Powers, L M ^a   Jadaan, O M ^b   Gyekenyesi, J P ^c  

^a CLEVELAND STATE UNIVERSITY   (United States)

^b UNIVERSITY OF WISCONSIN PLATTEVILLE   (United States)

^c NASA GLENN RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0005814563     PISSN: 07424795     EISSN: 15288919     Source Type: Journal    
DOI: 10.1115/1.2818070     Document Type: Article

References (44)

1. Brown, S., Kim, K., and Anand, L., 1989, “An Internal Variable Constitutive Model for Hot Working of Metals,” International Journal of Plasticity, Vol. 5, pp. 85-130.
2. Boyle, J., and Spence, J., 1983, Stress Analysis for Creep, Butterworth & Co., London.
3. Conway, J. B., 1968, Stress-Rupture Parameters: Origin, Calculations, and Use, Gordon and Breach, Science Publishers, New York.
4. Cuccio, J., Brehm, P., Fang, H., Hartman, J., Meade, W., Menon, M., Peralta, A., Song, J., Strangman, T., Wade, J., Wimmer, J., and Wu„ D., 1995, “Life Prediction Methodology for Ceramic Components of Advanced Heat Engines, Phase I,” Oak Ridge National Lab, ORNL-Sub/89-SC674/l/Vl.
5. Ding, J.-L., Liu, K. C., More, K. L., and Brinkman, C. R., 1994, “Creep and Creep Rupture of an Advanced Silicon Nitride Ceramic,” Journal of the American Ceramic Society, Vol. 77, pp. 867-874.
6. Duffy, S. F., and Gyekenyesi, J. P., 1989, “Time Dependent Reliability Model Incorporating Continuum Damage Mechanics for High-Temperature Ceramics,” NASA TM-102046.
7. Dunne, F., Othman, A., Hall, F., and Hayhurst, D., 1990, “Representation of Uniaxial Creep Curves Using Continuum Damage Mechanics,” International Journal of Mech. Science, Vol. 32, No. 11, pp. 945-957.
8. Evans, R., and Wilshire, B., 1985, “The Projection Concept,” Creep of Metals and Alloys, The Institute of Metals, London, pp. 197-256.
9. Evans, R., Murakami, T., and Wilshire, B., 1987, “The Generation of LongTerm Creep Data for Silicon Nitride Ceramics,” British Ceramics-Proceedings, No. 39.
10. Ferber, M., and Jenkins, M., 1992, “Evaluation of the Strength and Creep-Fatigue Behavior of Hot Isostatically Pressed Silicon Nitride,” Journal of the American Ceramic Society, Vol. 75, pp. 2453-2462.
11. Ferber, M., Jenkins, M., Nolan, T., and Yeckley, R., 1994, “Comparison of the Creep and Creep Rupture Performance of Two HIPed Silicon Nitride Ceramics,” Journal of the American Ceramic Society, Vol. 77, pp. 657-665.
12. Foley, M., Rossi, G., Sundberg, G., Wade, J., and Wu, F., 1992, “Analytical and Experimental Evaluation of Joining Silicon Carbide to Silicon Carbide and Silicon Nitride to Silicon Nitride for Heat Engine Applications,” Final Report, Ceramic Technology for Advanced Heat Engines, Oak Ridge National Lab.
13. Grathwohl, G., 1984, “Regimes of Creep and Slow Crack Growth in High-Temperature Rupture of Hot-Pressed Silicon Nitride,” in: Deformation of Ceramics II, Tressler, R. E., and Bradt, R. C., eds., Plenum Press, New York, pp. 573-586.
14. Hayhurst, D., Dimmer, P., and Chemuka, M., 1975, “Estimates of the Creep Rupture of Lifetime of Structures Using the Finite Element Method,” Journal of Mechanical Physics of Solids, Vol. 23, pp. 335-355.
15. Jones, D., 1986, “Phenomenological Analysis of Time-Temperature Mechanical Behavior of Ceramic Materials,” Proc. 10th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, FL.
16. Kachanov, L., 1960, The Theory of Creep, English Translation, Kennedy, A., ed., British Library, Wetnerley.
17. Khandelwal, P. K., Provenzano, N. J., and Schneider, W. E., 1995, “Life Prediction Methodology for Ceramic Components of Advanced Vehicular Heat Engines-Final Report,” Ceramic Technology Project, Oak Ridge National Lab.
18. Krempl, E., 1974, “Cyclic Creep—An Interpretive Literature Survey,” Welding Research Council Bulletin, No. 195, pp. 63-123.
19. Kraus, H., 1980, Creep Analysis, Wiley, New York.
20. Lange, F., 1976, “Interrelations Between Creep and Slow Crack Growth for Tensile Loading Conditions,” International Journal of Fracture, Vol. 12, pp. 739-744.
21. Larson, F., and Miller, J., 1952, “A Time-Temperature Relationship for Rupture and Creep Stresses,” Transactions ASME, Vol. 74, pp. 765-771.
22. Le Gac, H., and Duval, P., 1980, “Constitutive Relations for the Non-elastic Deformation of Polycrystalline Ice,” IUTAM Symposium on the Physics and Mechanics of Ice, pp. 51-59.
23. Lewis, G., and Ostvoll, A., 1992, “Constitutive Equations for the Creep of a Silicon Carbide Whisker-Reinforced Polycrystalline Alumina Composite Material,” Journal of the American Ceramic Society, Vol. 75, No. 12, pp. 3481-3484.
24. Luecke, W., Wiederhorn, S., Hockey, B., and Long, G., 1993, “Cavity Evolution During Tensile Creep of Si3N4,” Materials Research Society Symposium Proceedings, Vol. 287, pp. 467-472.
25. Manson, S., and Ensign, C., 1971, “A Specialized Model for Analysis of Creep-Rupture Data by the Minimum Commitment Method, Station-Function Approach,” NASA TM-X-52999.
26. Manson, S., and Halferd, A., 1953, “A Linear Time-Temperature Relation for Extrapolation of Creep and Stress-Rupture Data,” NASA TN-2890.
27. Maruyama, K., and Oikawa, H., 1987, “On Physical Bases of the Modified Projection Concept,” Proc. 3rd International Conference on Creep and Fracture of Engineering Materials and Structures, Wilshire and Evans, eds.
28. Menon, M., Fang, H. Wu., Jenkins, M., Ferber, M., More, K., Hubbard, C., and Nolan, T., 1994a, “Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part I, Experimental Observations,” Journal of the American Ceramic Society, Vol. 77, pp. 1217-1227.
29. Menon, M., Fang, H., Wu, D., Jenkins, M., and Ferber, M., 1994b, “Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part 111, Stress Rupture and Monkman-Grant Relationship,” Journal of the American Ceramic Society, Vol. 77, pp. 1235-1241.
30. Monkman, F., and Grant, N., 1956, “An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep-Rupture Test,” Proc. American Society for Testing and Materials, Vol. 56, 593-620.
31. Nemeth, N. N., Manderscheid, J. M., and Gyekenyesi, J. P., 1990, “Ceramics Evaluation and Reliability Analysis of Structures (CARES), Users and Programmers Manual,” NASA TP-2916.
32. Nemeth, N. N., Powers, L. P., Janosik, L. A., and Gyekenyesi, J. P., 1993, “Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program, Users and Programmers Manual,” NASA TM, to be published.
33. Norton, F., 1929, The Creep of Steel at High Temperatures, McGraw-Hill.
34. Ohji, T„ and Yamauchi, Y., 1993, “Tensile Creep and Creep Rupture Behavior of Monolithic and SiC-Whisker-Reinforced Silicon Nitride Ceramics,” Journal of the American Ceramic Society, Vol. 76, pp. 3105-3112.
35. Orr, R., Sherby, O., and Dorn, J., 1954, “Correlations of Rupture Data for Metals at Elevated Temperatures,” Transactions American Society for Metals, Vol. 46, p. 113.
36. Othman, A., and Hayhurst, D., 1990, “Multi-axial Creep Rupture of a Model Structure Using a Two Parameter Material Model,” International Journal of Mechanical Science, Vol. 32, pp. 35-48.
37. Quinn, G. D., 1986, “Static Fatigue Resistance of Hot Pressed Silicon Nitride,” Fracture Mechanics of Ceramics, Vol. 8, Bradt et al., eds., Plenum Press, pp. 319-332.
38. Quinn, G. D., 1990, “Fracture Mechanism Maps for Advanced Structural Ceramics, Part 1, Methodology and Hot Pressed Silicon Nitride Results,” Journal of Materials Science, Vol. 25, pp. 4361-4376.
39. Saith, A., Norton, P., and Parthasarathy, V., 1994, “SPSLIFE: Application to Preliminary Design Evaluation and Life Assessment of CSGT Components,” ASME Paper No. 94-GT-486.
40. Sankar, J., Krishnaraj, S., Vaidyanathan, X., and Kelkar, A., 1994, “Elevated Temperature Behavior of Sintered Silicon Nitride Under Pure Tension, Creep, and Fatigue,” Life Prediction Data and Methodologies for Ceramic Materials, ASTM STP 1201, Brinkman, C. R., and Duffy, S. F., eds., American Society for Testing and Materials, Philadelphia, pp. 19-35.
41. Sundberg, G., Vartabedian, A., Wade, J., and White, C., 1994, “Analytical and Experimental Evaluation of Joining Silicon Carbide to Silicon Carbide and Silicon Nitride to Silicon Nitride for Advanced Heat Engine Applications Phase II,” Final Report, Ceramic Technology Project, Oak Ridge National Lab.
42. Wiederhorn, S. M., 1974, “Subcritical Crack Growth in Ceramics,” Fracture Mechanics of Ceramics, Vol. 2, Bradt, R. C., et al., eds., Plenum Press, New York, pp. 613-646.
43. Wiederhorn, S., Quinn, G., and Krause, R., 1993, “Fracture Mechanism Maps: Their Applicability to Silicon Nitride,” Life Prediction Methodologies and Data for Ceramic Materials, ASTM STP-1201, Brinkman, C. R., and Duffy, S. F., eds., American Society for Testing and Materials, Philadelphia, pp. 36-61.
44. White, C., and Hazime, R., 1995, “Internal Variable Modeling of the Creep of Monolithic Ceramics,” Proc. 11th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention, Jadaan, O., ed., Philadelphia, PA, ASME.