Geometric variations: Analysis, optimization and control

International Journal of Pattern Recognition and Artificial Intelligence

Volumn 11, Issue 1, 1997, Pages 79-113

  Daniel, Brett T ^a   West, Geoff A W ^a   Cardew Hall, Michael ^b  

^a CURTIN UNIVERSITY   (Australia)

^b AUSTRALIAN NATIONAL UNIVERSITY   (Australia)

Author keywords

Automatic inspection; Deformable models; Process modeling

Indexed keywords

EID: 0005368538     PISSN: 02180014     EISSN: None     Source Type: Journal    
DOI: 10.1142/S0218001497000056     Document Type: Article

References (48)

1. A. Albano, "Representation of digitized contours in terms of conic arcs and stright-line segments", Computer Graphics and Image Processing 3 (1974) 23-33.
2. T. J. Baker, "Automatic mesh generation for complex three-dimensional regions using a contrained Delaunay triangulation", Engineering with Computers 5 (1989) 161-175.
3. D. H. Ballard and C. M. Brown, Computer Vision, Prentice-Hall, 1982.
4. A. Baumberg and D. Hogg, "Learning flexible models from image sequences", in Proc. 3rd European Conf. on Computer Vision, Springer-Verlag, 1994, pp. 299-308.
5. M. Berman, "Large sample bias in least squares estimators of a circular arc centre and its radius", Computer Vision, Graphics and Image Processing 45 (1989) 126-128.
6. N. S. Bernstein and K. Preiss, "Representation of tolerance information in solid models", in Advances in Design Automation - 1989, Montreal, Quebec, Canada, vol. 1, pp. 37-48.
7. P. J. Besl and N. D. McKay, "A method for registration of 3-D shapes", IEEE Trans. on Pattern Analysis and Machine Intelligence 14, 2 (1992) 239-256.
8. G. Borgefors, "Distance transforms in arbitrary dimensions", Computer Vision, Graphics and Image Processing 27 (1984) 321-345.
9. D. J. Burr, "A dynamic model for image registration", Computer Graphics and Image Processing 15 (1981) 102-112.
10. M. J. Cardew-Hall, T. Labans, G. West, and P. Dench, "A method of representing dimensions and tolerances on solid based free form surfaces", Robotics and Computer-Integrated Manufacturing 10, 3 (1993) 223-234.
11. J.-L. Chenot, "Finite element modeling of metal forming: From process simulation to physical identification", in Conf. on Mathematical Models for Materials Processing, Bristol, UK, 1991, pp. 43-65.
12. L. D. Cohen and I. Cohen, "A finite element method applied to new active contour models and 3D reconstruction from cross sections", in 3rd Int. Conf. on Computer Vision, Osaka, Japan, 1990, pp. 587-591.
13. T. F. Cootes and C. J. Taylor, "Active shape models - 'smart snakes'", in Proc. of the British Machine Vision Conf., Leeds, UK, 1992, pp. 266-274.
14. T. F. Cootes, C. J. Taylor, D. H. Cooper, and J. Graham, "Training models of shape from sets of examples", in Proc. of the British Machine Vision Conf., Leeds, UK, 1992, pp. 8-18.
15. R. Curwen and A. Blake, "Dynamic contours: Real-time active splines", in Active Vision, eds., A. Blake and A. Yuille, MIT Press, 1992.
16. A. de Pennington, P. M. Dew, N. P. Juster, and L. P. Wickens, "A mathematical framework for unidirectional worst case tolerance analysis across assemblies", Technical Report, University of Leeds, UK.
17. I. Doltsinis, "Numerical analysis and design of industrial superplastic forming", J. de Physique IV, Colloque C7 3 (1989) 1187-1197.
18. C. M. Eastman and K. Preiss, "A review of solid shape modeling based on integrity verification", Computer-Aided Design 16, 2 (1984).
19. R. W. Evans, "Modeling of metallurgical structural changes in forming", in Conf. on Mathematical Models for Materials Processing, Bristol, UK, 1991, pp. 21-42.
20. L. Fourment, T. Balan, and J.-L. Chenot, "Shape optimization for the forging process", in Simulation of Materials Processing: Theory, Methods and Applications - Numiform95, eds., S.-F. Shen and P. Dawson, Forming Processes, Ithaca, USA, 18-21 June 1995, pp. 557-562.
21. A. Hill, A. Thornham, and C. J. Taylor, "Model-based interpretation of 3D medical images", in Proc. of the British Machine Vision Conf., Surrey, UK, 1993, pp. 339-348.
22. R. C. Hillyard and I. C. Braid, "Analysis of dimensions and tolerances in computer-aided mechanical design", Computer Aided Design 10, 3 (1978) 161-166.
23. P. Hoffman, "Analysis of tolerances and process inaccuracies in discrete part manufacturing", Computer Aided-Design 14, 2 (1982) 83-88.
24. B. K. P. Horn, "Closed form solution of absolute orientation using unit quaternions", J. of Optical Society of America 4, 4 (1987) 629-642.
25. H. Hotelling, "The generalization of 'Student's' ratio", Annals of Mathematical Statistics 2 (1931) 360.
26. American National Standards Institute, "Dimensioning and tolerancing: ANSI Y14.5M", Technical Report, American Society of Mechanical Engineers, USA, 1982.
27. P. Karaolani, G. D. Sullivan, and K. D. Baker, "Parabolic and hermite cubic finite elements: A flexible technique for deformable models", in Proc. of the British Machine Vision Conf., Oxford, UK, 1990, pages 325-330.
28. P. Karaolani, G. D. Sullivan, and K. D. Baker, "Active contours using finite elements to control local scale", in Proc. of the British Machine Vision Conf., Leeds, UK, 1992, pp. 481-487.
29. P. Karaolani, G. D. Sullivan, K. D. Baker, and M. J. Baines, "A finite element method for deformable models", in Proc. of the 5th Alvey Vision Conf., Reading, UK, 1989, pp. 73-78.
30. M. Kass, A. Witkin, and D. Terzopoulos, "Snakes: Active contour models", in 1st Int. Conf. on Computer Vision, London, UK, 1987, pp. 259-268.
31. R. Light and D. C. Gossard, "Modification of geometric models through variational geometry", Computer-Aided Design 14, 4 (1982) 209-214.
32. B. Modayur, L. G. Shapiro, and R. M. Haralick, "Visual inspection of machined parts", in IEEE Conf. on Computer Vision and Pattern Recognition, Champaign, Illinois, USA, 1992, pp. 393-398.
33. J. Mundy, A. Noble, C. Marinos, V. D. Nguyen, A. Heller, J. Farley, and A. T. Tran, "An object-oriented approach to template guided visual inspection", in 11th. Int. Conf. on Pattern Recognition, The Hague, Netherlands, 1992, pp. 386-392.
34. A. Noble, V. D. Nguyen, C. Marinos, A. T. Tran, J. Farley, K. Hedegren, and J. L. Mundy, "Template guided visual inspection", in Proc. 2nd European Conf. on Computer Vision, Santa Margherita Ligure, Italy, 1992, pp. 893-901.
35. A. Noble and J. Mundy, "Toward template-based tolerancing from a Bayesian viewpoint", in IEEE Conf. on Computer Vision and Pattern Recognition, New York, USA, 1993, pp. 246-252.
36. Rolls-Royce plc. ES38: Compressor and turbine blades and vanes (company standard), Technical Report, Rolls-Royce pic, Derby, UK, 1987.
37. J. R. Quinlan, C4.5 Programs for Machine Learning, Morgan Kaufman, San Mateo, California, 1993.
38. A. A. G. Requicha and S. C. Chan, "Representation of geometric features, tolerances and attributes in solid modelers based on constructive solid geometry", IEEE Trans. on Robotics and Automation 2, 3 (1986) 156-165.
39. A. A. G. Requicha, "Toward a theory of geometric tolerancing", Int. J. of Robotics Research 2, 4 (1983) 45-60.
40. A. A. G. Requicha, "Representations for rigid solids: theory, methods and systems", ACM Computing Surveys 12, 4 (1986) 437-464.
41. L. Rivest, C. Fortin, and C. Model, "Tolerancing a solid model with a kinematic formulation", Computer-Aided Design 26, 6 (1994) 465-475.
42. P. L. Rosin and G. A. W. West, "Segmenting curves into elliptic arcs and straight lines", in 3rd Int. Conf. on Computer Vision, Osaka, Japan, 1990, pp. 75-78.
43. U. Roy and C. R. Liu, "Feature-based representational scheme of a solid modeler for providing dimensioning and tolerancing information", Robotics and Computer-Integrated Manufacturing 4, 3/4 (1988) 335-345.
44. British Standards, "Engineering drawing practice: Part 3 geometrical tolerancing", Technical Report, British Standards Institute, Milton Keynes, UK, 1972.
45. British Standards, "Engineering drawing practice: Part 2 recommendations for dimensioning and tolerancing of size", Technical Report, British Standards Institute, Milton Keynes, UK, 1985.
46. J. Turner, "Relative positioning of parts in assemblies using mathematical programming", Computer Aided Design 22, 7 (1990) 394-400.
47. D. Wilde, Optimum Seeking Methods, Prentice-Hall, 1964.
48. O. C. Zienkiewicz, The Finite Element Method, McGraw-Hill, 1977.