A NEW MODEL AND ANALYSIS OF ORTHOGONAL MACHINING WITH AN EDGE RADIUSED TOOL

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 1998-R, Issue , 1998, Pages 259-267

  Manjunathaiah, Jairam ^a   Endres, William J ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; MACHINING; SHEAR FLOW; STRAIN RATE;

CHIP FORMATIONS; DEFORMATION ZONE; FORCE MODELING; LOWER BOUNDARY; MACHINING FORCE; MACHINING PROCESS MODELING; MODELLING AND ANALYSIS; ORTHOGONAL MACHINING; SHEAR ANGLES; UNCUT CHIP THICKNESS;

SHEAR STRESS;

EID: 0004977428     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE1998-1037     Document Type: Conference Paper

References (39)

1. Abdelmoneim, M. Es., and Scrutton, R. F., 1974, “Tool edge roundness and stable build-up formation in finish machining”, Journal ofEngineeringfor Industry, Vol. 96, pp. 1258-1267.
2. Albrecht, P., 1960, “New developments in the theory of metal cutting process”, Journal ofEngineeringfor Industry, Vol. 82, pp. 348-358.
3. Armarego, E. J. A., and Brown., R. H., 1962, “On the size effect in metal cutting”, International Journal ofProduction Research, Vol. 1, pp. 75-99.
4. Arsecularatne, J. A., 1997, “On tool-chip interface stress distributions, ploughing force and size effect in machining”, International Journal ofMachine Tools and Manufacture, Vol. 37, pp. 885-889.
5. Backer, W. R., and Marshall, E. R., and Shaw, M. C., 1952, “The size effect in metal cutting”, Transactions of the ASME, Vol. 74, pp. 61-72.
6. Basuray, P. K., Mishra, B. K., and Lal, G. K., 1977, “Transistion from ploughing to cutting during machining with blunt tool”, Wear, Vol. 43, pp. 341-349.
7. Bitans, K., and Brown, R. H., 1965, “An investigation of the deformation in orthogonal cutting”, International Journal ofMachine Tool Design Research, Vol. 5, pp. 155-165.
8. Black, J. T, 1979, “Flow stress model in metal cutting”, Journal ofEngineeringfor Industry, Vol. 101, pp. 403-415.
9. Black, J. T, and Huang, J. M., 1995, “Shear strain in metal cutting”, International Journal of Machine Tool Design Research, Vol. 3-1, pp. 283-302.
10. Connolly, R., and Rubenstein, C., 1968, “The mechanics of continuous chip formation in orthogonal cutting”, International Journal of Machine Tool Design Research, Vol. 8, pp. 159-187.
11. Elanayar, S., and Shin, Y. C., 1996, “Modeling of tool forces for worn tools: Flank wear effects”, Journal of Manufacturing Science and Engineering, Vol. 118, pp. 359-366.
12. Endres, W. J., DeVor, R. E., and Kapoor, S. G., 1995, “A dual mechanism approach to the prediction of machining forces - Part 1 & 2”, Journal ofEngineeringfor Industry, Vol. 117, pp. 526-542.
13. Hill, R., 1950. The mathematical theory ofplasticity. Clarendon, Oxford.
14. Hsu, T. C., 1966, “A study of the shear and normal stresses on a cutting tool”, Journal ofEngineeringfor Industry, Vol. 88, pp. 51-64.
15. Ikawa, N., and Shimada, S., July 1977, “Cutting tool for ultraprecision machining”, In Proceedings of the 3rd International Conference on Production Engineering, pp. 128-136, Kyoto.
16. Kita Y, Ido M., and Kawasaki, N„ 1982, “A study of metal flow ahead of tool face with large negative rake angle”, Journal ofEngineering for Industry, Vol. 104, pp. 319-325.
17. Komanduri, R., 1971, “Some aspects of machining with negative rake tools simulating grinding”. International Journal of Machine Tool Design Research, Vol. 11, pp. 223-233.
18. Kopalinsky, E. M., and Oxley, P. L. B., 1984, “Size effects in metal removal processes”, In 3rd Conference on the Mechanical Properties ofMaterials at High Rates ofStrain, Institute of Physics Conference Series No. 70, pp. 389-396, Oxford.
19. Kopalinsky, E. M., and Oxley, P. L. B., 1995, “Investigation of the deformation and damage sustained by wearing surface in sliding metallic friction”, Journal ofTribology, Vol. 117, pp. 315-320.
20. Kragelskii, I. V., 1965. Friction and wear. Butterworths, London.
21. Larsen-Basse, J., and Oxley, P. L. B., 1973, “Effect of strain-rate sensitivity on scale phenomena in chip formation”, In Proc. 13th MTDR Conf, pp. 209-216, London. Macmillan.
22. Makino, R., and Usui, E., 1973, “An analysis of stress and strain distributions in the plastic region of slow speed, steady-state machining”, Bulletin of the Japan Society of Precision Engineering, Vol. 7, pp. 43-50.
23. Manjunathaiah, J., and Endres, W. J., 1996, “Effects of a honed cutting edge in machining”, In Proceedings of the Second S. M. Wu Manufacturing Symposium, Ann Arbor, pp. 25-32. SME.
24. Masuko, M., 1956, “Fundamental research on the metal cutting - second report”, Bulletin ofJapan Society ofMechanical Engineers, Vol. 22.
25. Nakayama, K. and Tamura, K., 1968, “Size effect in metal cutting force”, Journal ofEngineeringfor Industry, Vol. 90, pp. 119-126.
26. Okushima, K., and Hitomi., K., 1961, “An analysis of the mechanism of orthogonal cutting and its application to discontinuous chip formation”, Journal ofEngineeringfor Industry, pp. 554-556.
27. Okushima, K., and Kakino, Y, 1969, “Study on the generating process of machined surface”, Bulletin ofJapan Society ofMechanical Engineers, Vol. 12, pp. 119-126.
28. Oxley, P. L. B., 1989. The mechanics ofmachining: An analytical approach to assessing machinability. Ellis Horwood Limited.
29. Palmer, W. B., and Oxley, P. L. B.. 1959, “Mechanics of metal cutting”, Proceedings ofthe Institution ofMechanical Engineers, Vol. 173, pp. 623-654.
30. Roth, R. N., Analysis offlow round tool cutting edge. PhD thesis, The University of New South Wales, Australia, 1969.
31. Roth, R. N., and Oxley, P. L. B., 1972, “A slip-line field analysis for orthogonal machining based on experimental flow fields”, Journal of Mechanical Engineering Science, Vol. 14, pp. 85-97.
32. Rubenstein, C., Grozman, F. K., and Koenigsberger, F., 1966, “Force measurements during cutting tests with single point tools simulating the action of a single abrasive grit”, Proceedings of the Industrial Diamond Conference, Vol. 1, pp. 161.
33. Schimmel, R. J., Manjunathaiah, J., and Endres, W. J., 1997, “An experimental investigation of the variability of edge hones and their effects on machining forces”, In G. J. Weins, editor, Manufacturing Science and Engineering, Vol. MED 6-2, pp. 261-268. ASME.
34. Schimmel, R. J., Stevenson, R., and Endres, W. J., “Application of an internally consistent material model to determine the effect of tool edge geometry in orthogonal machining”. To be submitted, May 1998.
35. Stevenson, R., 1997, “Study on the correlation of workpiece mechanical properties from compression and cutting tests”, Machining Science and Technology, Vol. 1, pp. 67-79.
36. Thomsen, E. G., Lapsley, J. T, and Grassi, R. C., 1953, “Deformation work absorbed by the workpiece during metal cutting”, Transactions ofthe ASME, Vol. 75.
37. Waldorf, D. J., Shearing, ploughing and wear in orthogonal machining. PhD thesis, University of Illinois, 1996.
38. Wu, D. W., 1988, “Application of a comprehensive dynamic cutting force model to orthogonal wave generating processes”, International Journal ofMechanical Sciences, Vol. 30, pp. 581-600.
39. Zorev, N. N., 1966, Metal cutting mechanics, Pergamon Press.