Support of disassembly / reassembly evaluation within total life cycle modeling through feature neighborhoods

Proceedings of the ASME Design Engineering Technical Conference

Volumn 6, Issue , 1998, Pages

  Otto, Harald E ^a   Kimura, Fumihiko ^b   Mandorli, Ferruccio ^a  

^a UNIVERSITY OF TOKYO   (Japan)

^b UNIVERSITÀ POLITECNICA DELLE MARCHE   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

SUSTAINABLE DEVELOPMENT;

FEATURE TECHNOLOGIES; INTEGRATED PRODUCTS; MATERIAL RECYCLING; PRODUCT DESCRIPTIONS; PRODUCT LIFE CYCLE STAGES; PRODUCT MAINTENANCE; STRUCTURAL DIMENSIONS; SUSTAINABLE PRODUCT DEVELOPMENT;

LIFE CYCLE;

EID: 0004892442     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC98/CIE-5696     Document Type: Conference Paper

References (39)

1. ACIS, ACIS 3D Toolkit: Extension Reference, Spatial Technology, Inc., Boulder, Colorado, 1996.
2. ACIS Geometric Modeler: Programmers Reference, Spatial Technology, Inc., Boulder, Colorado, 1997.
3. Alting, L. and Legarth, J.B., Life Cycle Engineering and Design, Annals of the CIRP, 44, 2, pp. 1-11, 1995.
4. Boothroyd, G. and Dewhurst, P., Design for Assembly: A Designer's Handbook, Boothroyd Dewhurst Inc., Wakefield, RI, 1983.
5. Boothroyd, G. and Alting, L., Design for Assembly and Disassembly, Annals of the CIRP, 41, 2, pp. 625-636, 1992.
6. Coulter, S., Bras, B. and Foley, C., A Lexicon of Green Engineering Terms, in: Proceedings of International Conference on Engineering Design, pp. 1-7, Praha, August, 1995.
7. Environmental Protection Agency, Life Cycle Design Guidance Manual, EPA/600/r-92/226, US Environmental Protection Agency, Office of Research and Development, Washington DC, 1993.
8. Grayer, A.R., The automatic production of machined components starting from a stored geometric description, in: Advances in Computer Aided Manufacture, D. McPherson (ed.), North-Holland, pp. 137-150, 1977.
9. Hornby, A.S., Oxford Advanced Learner's Dictionary of Current English, Oxford University Press, Oxford, U.K., 1974.
10. Ishii, K., Life-Cycle Engineering Design, Transactions of the ASME,117, pp. 42-47, 1995.
11. Ishii, K. and Miller, R.A., Design Representation for Manufacturability Evaluation in CAD: Beyond Feature-Based Design, in: Proceedings of ASME International Computers in Engineering Conference, San Francisco, California, pp. 37-44, August, 1992.
12. Keoleian, G.A. and Menery, D., Sustainable Development by Design: Review of Life Cycle Design and Related Approaches, Air and Waste, 44, 12, pp. 645-668, 1994.
13. Kimura, F. and Suzuki, H., Product Life Cycle Modeling for Inverse Manufacturing, in: Life Cycle Modeling for Innovative Products and Processes, F.-L. Krause and H. Jansen (eds.), Chapman and Hall, New York, 1996.
14. Kimura, F., Life Cycle Modelling and Inverse Manufacturing, in: Pre-Print of Seminar on Service Engineering, pp. 3-25, Tokyo, June, 1997.
15. Kroll, E., Modeling and Reasoning for Computer-Based Assembly Planning, in: Concurrent Engineering: Automation, Tools and Techniques, A. Kusiak (ed.), John Wiley and Sons, New York, pp. 177-205, 1993.
16. Kyprianou, M.R., Shape Classification in Computer Aided Design, Ph.D. Thesis, University of Cambridge, Cambridge, U.K., 1980.
17. Mandorli, F., Otto, H.E. and Kimura, F., A Reference Kernel Model for Feature-Based CAD Systems Supported by Conditional Attributed Rewrite Systems, in: Second Symposium on Solid Modeling and Applications, J. Rossignac, J. Turner, and G. Allen (eds.), Montreal, pp. 343-354, 1993.
18. Mandorli, F., Otto, H.E., Cugini, U. and Kimura, F., Reflective Control of Attributed Entities in Feature-Based CAD Systems using a CARW System Manager, in: Knowledge Intensive CAD, T. Tomiyama, M. Mäntylä and S. Finger (eds.), Chapman and Hall, London, pp. 151-170, 1996.
19. Miyakawa, S. and Ohashi, T., The Hitachi Assemblability Evaluation Method (AEM), in: Proceedings of International Conference on Product Design for Assembly, Newport, RI, April, 1986.
20. Otto, H.E. and Mandorli, F., A Reference Kernel for Feature-Based CAD-Systems; Theoretical and Practical Aspects, Research Note RN-KLO-7-92, Dept. of Precision Machinery Engineering, CAD/CAM Research, University of Tokyo, July, 1992.
21. Otto, H.E. and Kimura, F., Integrated Entity Concepts and Attributed Structures as a Base for Feature Modeling, in: Proceedings of JSPE Symposium on Factory Automation and Computer-Integrated Manufacturing, Kyoto, October 1993.
22. Otto, H.E. and Kimura, F., Denotational Spaces for Geometrical Semantics of Design Form Features Based on Typed Attributed Entity Structures, in: International Conference on Computer Aided Geometric Design, Penang, July, 1994.
23. Otto, H.E., Mandorli, F., Cugini, U. and Kimura, F., Domain-Oriented Semantics For Feature Modeling Based On TAE Structures Using Conditional Attributed Rewriting Systems, in: Proceedings of A S M E International Computers in Engineering Conference, Minneapolis, pp. 13-27, September, 1994.
24. Otto, H.E. and Kimura, F., Context-Dependent Identification of TAE Structures Used Within Feature-Based CAD Systems, in: Proceedings of JSPE Symposium on Feature Modeling, Okayama, September 1995.
25. Pratt, M.J., Synthesis Of An Optimal Approach To Form Feature Modeling, in: Proceeding of ASME Computer and Engineering Conference, San Francisco, California, pp. 263-274, 1988.
26. Pratt, M.J., A Hybrid Feature-Based Modelling System, in: Proceedings of Advanced Geometric Modelling For Engineering Applications Conference, F.-L. Krause and H. Jansen (eds.), Berlin, Germany, pp. 177-189, 1989.
27. Rosario, L.M. and Knight, W.A., Design for Assembly Analysis: Extraction of Geometric Features from a CAD System Data Base, Annals of the CIRP, 38, 1, pp. 13-16, 1989.
28. Rosen, D.W., Bras, B, Hassenzahl, S.L., Newcomb, P.J. and Yu, T., Towards computer-aided configuration design for the life cycle, Journal of Intelligent Manufacturing, 7, pp. 145-160, 1996.
29. Rossignac, J.R., Issues On Feature-Based Editing And Interrogation Of Solid Models, Computers & Graphics, pp. 149-172, 1990.
30. Scarr, A.J., Product Design for Automated Manufacture and Assembly, Annals of the CIRP, 35, 1, pp. 1-5, 1986.
31. Shah, J.J., SreevalSan, P., Rogers, M.T., and Billo, R., Current Status of Features Technology, Report #R-88-04.1, CAM-I, Arlington, Texas, 1988.
32. Shah, J.J., Feature transformations between applicationspecific feature spaces, Computer-Aided Engineering Journal, pp. 247-255, 1988.
33. Shah, J.J., Assessment of features technology, Computer-Aided Design, 23, 5, pp. 331-343, 1991.
34. Shah, J.J., Mäntylä, M. and Nau, D., Introduction to Feature Based Manufacturing, Advances in feature based manufacturing, Elsevier Science B.V., 1994.
35. Shah, J.J. and Mäntylä, M., Parametric and Feature-Based CAD, Wiley and Sons, New York, New York, 1995.
36. Smyth, M., Effectively given domains, Theoretical Computer Science, 5, pp. 257-274, 1977.
37. Sullivan, J.L. and Young, S.B., Life Cycle Analysis/Assessment, Advanced Materials & Processes, 2, pp. 37-40, 1995.
38. Umeda, Y., Maintenance Based Life Cycle Engineering, in: Pre-Print of Seminar on Service Engineering, pp. 109-119, Tokyo, June, 1997.
39. Wesley, M.A., Lozano-Perez,T., Lieverman, L.I., Lavin, M.A. and Grossman, D.D., A Geometric Modelling System for Automated Mechanical Assembly, IBM Journal of Research and Development, 24, 1, pp. 64-74, 1980.