On the exact representation of the boundary surfaces of the swept volume of a cylinder undergoing rational bezier and B-spline motions

Proceedings of the ASME Design Engineering Technical Conference

Volumn 1, Issue , 1999, Pages 375-384

  Xia, J ^a   Ge, Q J ^a  

^a Stony Brook University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CIRCULAR CYLINDERS; COMPUTER AIDED ANALYSIS; COMPUTER AIDED DESIGN; INTERPOLATION;

BOUNDARY SURFACES; COMPUTER-AIDED SYNTHESIS; DEVELOPABLE SURFACES; EXACT REPRESENTATIONS; FREE-FORM SURFACE; POINT TRAJECTORY; TOOL PATH PLANNING; TRADITIONAL APPROACHES;

SPLINES;

EID: 0004023759     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC99/DAC-8607     Document Type: Conference Paper

References (37)

1. Blackmore, D., and Leu, M.C., 1992a, "Analysis of swept volume via Lie group and differential equations". International Journal of Robotics Research, 11(6):516-536.
2. Blackmore, D., Leu, M.C., and Wang, K.K., 1992b, "Application of flows and envelopes to NC machining," Annals of CIRP, 41:493-496.
3. Blackmore, D., Jiang, H., and Leu, M.C., 1992c, "Modleing of swept solids using sweep differential techniques," Proceedings of Fourth IFIP WG5.2 Workshop on Geometric Modeling in Computer-Aided Design.
4. Bobrow, J., 1985, "NC machine tool path generation from CSG part Representations", Computer Aided Design, 17(2), p69-76.
5. Bodduluri, R.M.C., and Ravani, B., 1993, "Design of developable surfaces using duality between plane and point geometries," Computer-Aided Design, 25(10):621-632.
6. Chappel, I. T., 1983, ''The use of vectors to simulate material removed by Numerically controlled milling". Computer Aided Design, 15(3), P 156-158.
7. Chen, S. and Williams, L., 1993, ''View interppolation for image synthesis". In computer Graphics(SIGGRAPH '93 Proceedings), vol. 27, p 279-288.
8. Choi, B.K., and Jun, C.S., 1989, "Ball-end cutter interference avoidance in NC machining of sculptured surfaces", Computer-Aided Design, 21(6), p 371-378.
9. Duncan, J.P., and Mair, S.G., 1983, "Sculptured Surfaces in Engineering and Medicine", Carnbridge Univ. Press.
10. Fridshal, R. and Duncan, D., Cheng, K. D. and Zucker, W., 1982," Numerical control part program verification system". Proceedings Of Conference on CADICAM Technology for Mechanical Engineering, MIT Press, p 236-254.
11. Ganter, M.A., 1985, "Dynamic collision detection using kinematics and solid modeling techniques," Ph.D. Dissertation, University of Wisconsin-Madison.
12. Ge, Q.J., and Ravani, B., 1991, "Computer aided geometric design of motion interpolants". Proceedings of 17th ASME Design Automation Conference, p 33-41, Miami, FL. See also ASME Journal of Mechanical Design, 116(3):756-762.
13. Ge, Q.J., and Ravani, B., 1994, "Geometric construction of Bezier motions". ASME Journal of Mechanical Design, 116(3):749-755.
14. Ge, Q. J., and Kang,. D., Suchia, M., 1998, ''Kinematically generated dual tensor-product Bezier surfaces". Proc. 1998 ASME Mechanisms Conference, Atlanta, GA, Paper No. DETC98/MECH-5977.
15. Hu, Z. and Ling, Z, 1994, ''Generating swept volumes with instantaneous screw axes". Proceedings of ASME Mechanism Synthesis and Analysis Conference, DE-Vol. 70, p 7-14.
16. Hunt, W.A., and Voelcker, H., 1982, "An exploratory study of automatic verification of programs for numerically controlled machine tools," TM-34, Production Automation Project, University of Rochester.
17. Jensen, C. G., and Anderson, D. C., 1993, "Accurate tool placement and orientation for finish surface machining," Journal of Design and Manufacturing, 3:251-261.
18. Jerard, R.B., and Drysdale, R.L., 1988, "Geometric simulation of numerical control machinery," ASME Computers in Engineering, Vol.2, p 129-136.
19. Jerard, R.B., Hussaini, S.Z., Drysdale, R.L., and Schaudt, B., 1989, "Approximate methods for simulation and verification of numerically controlled machining programs," Visual Computer, 5:329-348.
20. Laximiprasada, P., and Sarma, S., 1997, "A feature free approach, to 5-axis tool path generation". Proc. 1997 ASME Design Manfuacturing Conference, Paper no. DETC97/DFM-4325, Sacramento, CA.
21. Lee, Y.S., 1997, "Admissible tool orientation control of 5-axis complex surface machining for CAD/CAM systems". Proc. 1997 ASME Design Manfuacturing Conference, Paper no. DETC97/DFM-4324, Sacramento, CA.
22. Li, S.X., and Jerard, R.B., 1994, "5-axis machining of sculptured surfaces with a flat-end cutter". Computer Aided Design, 26(3):165-178.
23. Jiittler, B., and Wagner, M.G., 1996, ''Computer Aided Design With Spatial Rational B-Spline Motions", ASME J. of Mechanical Design, 119(2): 193-201.
24. Juttier, B., and Wagner, M.G., 1999, ''Rational Motion Based Surface Generation", Computer Aided Design.
25. Marciniak, K., 1991, Geometric Modeling for Numerically Controlled Machining, Oxford University Press.
26. Menon, J. P. and Voelcker, H. B., 1993, ''Toward a comprehensive formulation of NC verification as a mathematical and computational problem". Journal of Design and Manufacturing, vol. 3, no. 4, p 263-278.
27. Menon, J. P. and Robinson, D. M. 1993, ''Advanced NC verification via massively paiallel ray casting: extensions to new phenomena and geometric domains", ASME Manufacturing Review, vol. 6, no.2, p 141-154.
28. Oliver, J.H., 1986. Graphical Verification of Numerically Controlled Milling Programs for Sculptured Surface Parts, Ph.D. Dissertation, Michigan State University.
29. Pottmann, H., and Frain, G., 1995, "Developable rational Bezier and B-spline surfaces," Computer Aided Geometric Design, 12:513-531.
30. Pottmann, H. and Wagner, M. G., 1998, ''Contributions to Motion Based Surface Design", International Journal of Shape Modelling, 4, p 3-196.
31. Sarma, R., 1998, ''Flat-ended tool swept sections For 5-axis machining of sculptured surfaces". Submitted to ASME J. of Manufacturing Science And Enginering.
32. Sarma, R and Dutta, D, 1996, ''The Geometry and Generation of NC tool paths". Proceedings of ASME Design Engineering Technical Conferences and Computers in Engineering Conference, p 1-11.
33. Sambandan, K., and Wang, K. K., 1989, ''Five-axis swept volumes for graphic NC simulatioh and verification". Proceedings of ASME Design Technical Conferences, DE-Vol. 19(1), P143-150.
34. Sungurtekin, U. A., Voelcker, H. B. 1986, ''Graphical simulation and automatic verification of NC machining programs". IEEE International Conference on Robotics and Automation, P157-165.
35. Srinivasan, L., and Ge, Q. J., 1998, ''Fine tuning of rational B-spline motions", ASME Journal of Mechanical Design, 120(l):46-51.
36. Voelcker, H. B. and Hunt, W. A., 1981, ''The role of solid modeling in machining -Process modeling and NC verification", SAE Technical Paper 810195.
37. Weld, J.D., and Leu, M.C., 1990, "Geometric representation of swept volumes with applications to polyhedral objects," I nt'I J. of Robotics Research, 5:105-117.