Deformation of fused silica: Nanoindentation and densification

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 3424, Issue , 1998, Pages 72-81

  Shorey, Aric ^a   Xin, Kai ^a   Chen, Kang Hua ^a   Lambropoulos, John C ^a,b  

^a University of Rochester   (United States)

^b UNIVERSITY OF ROCHESTER   (United States)

Author keywords

BK7; Damage; Densification; Fused Silica; LHG8; Nanoindentation; Roughness; SiO2

Indexed keywords

COMPRESSIVE STRESS; DEFORMATION; DENSIFICATION; OPTICAL GLASS; REFRACTIVE INDEX; RESIDUAL STRESSES; SHEAR STRESS; SURFACE ROUGHNESS;

OPTICS MANUFACTURING;

FUSED SILICA;

EID: 0003665914     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.323765     Document Type: Conference Paper

References (31)

1. T. S. Izumitani, Polishing mechanism of fused silica glass, Technical Digest, Topical Meeting on the Science of Polishing, Optical Soc. America, pp. TuB-A1 to A4, April 17, 1984.
2. H. Yokota, H. Sakata, M. Nishibori, and K. Kinosita, Ellipsometric study of polished glass surfaces, Surface Science 16, 265-274, 1969.
3. M. Malin and K. Vedam, Ellipsometric studies of environment sensitive polish layers of glass, J. Appl. Phys. 48, 1155-1157, 1977.
4. O. Podzimek, Deformation energy under optical surfaces, Proc. SPIE vol. 801 - High Power Lasers 221-225, 1987.
5. O. Podzimek, Residual stress and deformation energy under ground surfaces of brittle solids, Annals of the CIRP 35, 397-400, 1986.
6. O. Podzimek, Residual stress and deformation energy under ground surfaces of brittle solids, Technical report WB-85-16, 112 pages, 23 April 1986, Twente University of Technology, 1986.
7. J. C. Lambropoulos, Su Xu, and Tong Fang, Loose abrasive lapping hardness of optical glasses and its interpretation, Applied Optics 36, 1501-1516, 1997.
8. M. Buijs and K. Korpel-Van Houten, A model for lapping of glass, J. Mater. Sci. 28, 3014-3020, 1993.
9. S. V. Kryukova, N. I. Eremina, and V. V. Bondar, Investigation of the effect of grinding conditions on the roughness of the surfaces of glasses of different composition, Sov. J. Opt. Technol. 51, 327-329, 1985.
10. J.C. Lambropoulos, Su Xu, Tong Fang, and Don Golini, Twyman effect mechanics in grinding and microgrinding, Appl. Optics 35, 5704-5713, 1996.
11. H. H. Pollicove and D. T. Moore, Center for Optics Manufacturing Overview, in Optical Fabrication and Testing Workshop, Vol. 24, 1992 OSA Technical Digest Series, 44-47, 1992.
12. D. Golini, H. Pollicove, G. Platt, S. Jacobs, and W. Kordonski, Asphere production by computer, Laser Focus World 83, September, 1995.
13. J. Lambropoulos, T. Fang, P. Funkenbusch, S. Jacobs, M. Cumbo and D. Golini, Surface microroughness of optical glasses under deterministic microgrinding, Applied Optics 35, 4448-4462, 1996.
14. D. F. Edwards and P. P. Hed, Optical glass fabrication technology. 2: Relationship between surface roughness and subsurface damage, Applied Optics 26, 4677-4680, 1987.
15. J. C. Lambropoulos, S. D. Jacobs, and J. Ruckman, Micromechanics of material removal mechanisms from brittle surfaces: Subsurface damage and surface microroughness, Proceedings of 18th International Congress on Glass, American Ceramic Society, San Francisco, California, USA, 5-10 July, 1998. See also: Laboratory for Laser Energetics, Report vol. 74, University of Rochester, 1998.
16. J. C. Lambropoulos, S. D. Jacobs, and J. Ruckman, Micromechanics of material removal mechanisms from brittle surfaces: Subsurface damage and surface microroughness, Proceedings of 18th International Congress on Glass, American Ceramic Society, San Francisco, California, USA, 5-10 July, 1998. See also: Laboratory for Laser Energetics, Report vol. 74, University of Rochester, 1998.
17. J.C. Lambropoulos, Tong Fang, Su Xu, and S.M. Gracewski, Constitutive law for the densification of fused silica, with applications in polishing and microgrinding, Proc. SPIE vol. 2536 - International Symposium on Optical Science, Engineering, and Instrumentation 275-286, 1995.
18. J.C. Lambropoulos, Su Xu, and Tong Fang, Constitutive law for the densification of fused silica, with applications in polishing and microgrinding, J. Amer. Ceram. Soc. 79, 1441-1452, 1996.
19. P. W. Bridgman and I. Simon, Effect of very high pressures on glass, J. Appl. Phys. 24, 405-413, 1953.
20. C. Meade and R. Jeanloz, Frequency-dependent equation of state of fused silica to 10 GPa, Phys. Rev. B 35, 236-244, 1987.
21. 2 by very high static pressures, Physics and chemistry of glasses 24, 104-110, 1983.
22. F. M. Ernsberger, Role of densification in deformation of glasses under point loading, J. Amer. Ceram. Soc. 51, 545-547, 1968.
23. J. E. Neely and J. D. Mackenzie, Hardness and low-temperature deformation of silica glass, J. Mater. Sci. 3, 603-609, 1968.
24. K. W. Peter, Densification and flow phenomena of glass in indentation experiments, J. Non-Crystall. Solids 5, 103-115, 1970.
25. C. R. Kurkjian, G.W. Kammlott, and M. M. Chaudhri, Indentation behavior of soda-lime silica glass, fused silica, and single-crystal quartz at liquid nitrogen temperature, J. Amer. Ceram. Soc. 78, 737-744, 1995.
26. M. Imaoka and I. Yasui, Finite element analysis of indentation on glass, J. Non-Crystall. Solids 22, 315-329, 1976.
27. M. Arora, D. B. Marshall, B.R. Lawn, and M. V. Swain, Indentation deformation/fracture of normal and anomalous glasses, J. Non-Crystall. Solids 31, 415-428, 1979.
28. R. F. Cook and G. M. Pharr, Direct observation and analysis of indentation cracking in glasses and ceramics, J. Am. Ceram. Soc. 73, 787-817, 1990.
29. J. S. Tse, D. D. Klug, and Y. LePage, High-pressure densification of amorphous silica, Phys. Rev. B 46, 5933-5938, 1992.
30. M. F. Doerner and W. D. Nix, A method for interpreting the data from depth-sensing indentation instruments, J. Mater. Res. 1, 601-609, 1986.
31. W.C. Oliver and G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7, 1564-1583, 1992.