EXPERIMENTAL STUDY OF THE PRE-STRESSING CAPABILITY THROUGH RESIDUAL STRESS GENERATION IN SUPERFINISH MACHINING OF HARDENED STEEL

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 1997-V, Issue , 1997, Pages 197-207

  Liu, C R ^a   Agha, S R ^a  

^a SCHOOL OF INDUSTRIAL ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; COMPRESSIVE STRESS; FATIGUE OF MATERIALS; GRINDING (MACHINING); HARDENING; HARDNESS; PRESTRESSING; SHOT PEENING; SURFACE STRESS; TURNING;

CONDITION; FEEDRATE; FINISH HARD TURNING; HARD TURNING; HARDENED STEEL; MACHINED SURFACE; PRE-STRESSING; STRESS GENERATION; SURFACE FINISHES; SURFACE LOADS;

RESIDUAL STRESSES;

EID: 0003339868     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE1997-1093     Document Type: Conference Paper

References (44)

1. Agha, S., Surface Integrity Aspects for Double layer Removal in Dry Hard Turning, " MS Thesis, Purdue University, May 1996.
2. Brinksmeier, E., Cammett, J.T., Konig, W., Leskovar, P., Peters,!., and Tonshoff, "Residual Stresses- Measurement and Causes in Machining Processes, " Annals of CIRP, Vol. 31, 1982, pp. 491-510.
3. Chou, Y.S., "Wear Mechanisms of Cubic Boron Nitrdie Tools in Precision Turning of Hardened Steels, " Ph.D, Dissertation, Purdue University, 1994.
4. Clark, J.R., and Grant, M.B., "The Effect of Surface Finish on Component Performance, " Int. J. Mach. Tools Manufact., Vol. 32, 1992, pp. 57-66.
5. Ekstedt, T., "The Challenges/Opportunities of Hard Turning," Proceedings of The Eastern manufacturing Conference, Vol. 1, 1987, pp. 197-309.
6. Field, M., Kahles, J.F., "Review of Surface Finish Integrity of Machined Components, " Annals of CIRP, Vol. 20, No. 2, 1971, pp.153-163.
7. Field, M., Kahles, J.F., and Cammett, J.T., "A Review of Measuring Methods of Surface Integrity," Annlas of CIRP, Vol. 21, No. 2, 1972, pp. 219-238.
8. Henrisken, E.K., "Residual Stresses in Machined Surfaces," Transactions of ASME, Vol. 73, Jan. 1951, pp. 69-76.
9. Hilley, M.E., (Ed.), Residual Stress Measurement by X-ray Diffraction, SAE Report J 784a, Society of Automotive Enigineers, 1971.
10. Israeli, A. and Papiar, R., " Residual Stress Profile in Machined Parts," Journal of Testing and Evaluation, JTEVA, Vol. 9, No. 6, Nov. 1981, pp. 348-353.
11. Jang, D.Y., Liou, J., and Cho, U., "Study of Residual Stress Distribution in the Machined Stainless Steel Components," Tribology Transactions, Vol. 37, 1994, pp. 594-600.
12. Konig, W., Komanduri, R., Tbnshoff, H.K., and Ackershott, G.," Machining of Hard Materials," Annals of CIRP, Vol. 33, No. 2, 1984, pp. 417-427.
13. Kdnig,W., Klinger, M., and Link, R., "Machining of Hard Materials with Geometrically Defined Cutting Edges-Field of Applications and Limitations," Annals of CIRP, Vol. 39, 1990, pp. 61-64.
14. Kbnig, W., Berktold, K., and Koch, k.F.,"Turning versus Grinding-A Comparison of Surface Integrity Aspects and Attainable Accuracies," Annals of CIRP, Vol. 32, No.l, 1993, pp. 39-43.
15. lau, W.S., Wang, M., and Lee, W.B., "A Simple Method of Eliminating Residual Tensile Stresses in The Grinding of Low Carbon Steels," Int. J. Mach. Tools Manufact., Vol. 31, No. 3, 1991, pp. 425-434.
16. LeMire, A., "The Hard Facts of Hard -Part Turning," Modern Machine Shop, August, 1987, pp. 50-57.
17. Leskovar, P., and Peklenik, J., "Influences Affecting Surface Integrity in the Cutting Process, " Annals of CIRP, Vol. 31, No. 1, 1982, pp. 447-450.
18. Lin, Z.C., Lin, Y.Y., and Liu, C.R., "Effect of Thermal Load and Mechanical Load on the Residual Stress of a Machined Workpiece," International Journal of Mechanical Science, Vol. 33, No. 4, 1991, pp. 263-278.
19. Liu, C.R., and Barash, M.M., "Variables Governing Patterrns of Mechanical Residual Stress in a Machined Surface," ASME Journal of Engineering for Industry, 1982.
20. Liu, C.R., and Mittal, S., "Single-Step Superfinishing Using Hard Machining Resulting in Superior Surface Integrity, " Journal of Manufacturing Systems, Vol. 14, No. 2, 1995, pp. 129-133.
21. Mason, F., "Hard Turning Is Not a Black Art," American Machinist, March 1993, pp. 41-43.
22. Masuko, M., and Kumabe, J., "A Few New Methods of Metal Cutting to Get a Fine Surface at Low Speed," JSME Bulletin, Vol. 2, no. 7, 1959, pp. 487-494.
23. Matsumoto, Y., Barash, M.M, and Liu, C.R., "Effect of Hardness on the Surface Integrity of AISI 4340 Steel," Journal of Engineering for Industry, Vol. 108, 1986, pp. 169-175.
24. Mittal, S., " Residual Stresses ans Surface Roughness in Superfinishing Hardened Steel Using Precision Turning," Ph.D Dissertation, Purdue University, 1996.
25. Nakai, T., Nakatani, S., Tomita, K., and Goto, M., "Hard Turning by CBN" Proceedings of Eastern manufacturing Technology Conference, Springfield, Ma,. 1991.
26. Nakayama, K., Arai, M., and Kanda, T., "Machining Characterestics of Hard Materials, " Annals of CIRP, Vol. 37, No. 1, 1988, pp. 89-92.
27. Noaker, P. M., "Hard Facts on Hard Turning," Manufacturing Engineering, Feb. 1992, pp. 43-46.
28. Noyan, I. C., and Cohen, J. B., Residual Stress, Springer, Berlin, 1987.
29. Noyan, I. C., and Cohen, J.B., "Residual Stresses in Materials," American Machinist, Vol. 79, March 1991, pp. 142-153.
30. Ogata, M., "Einsatz von PCBN-Werkzeugen in der Production," VDI Berichte, No. 762, 1989, pp. 271-279.
31. Okushima, K., and Kakino, Y., "The Residual Stress Produced by Metal Cutting", Annals of CIRP, Vol.20, No. 1, 1971, pp. 13-14.
32. Qufie, X., Bayoumi, A.E., Kendal, L.A., Sheldon, G.L., " A Study on Residual Stresses and Tool Wear Induced by Machining Processes", NMRC Conference, 1992, pp. 170-174.
33. Sadat, A.B., and Bailey, J.A., "Residual Stress in Turned AISI 4340 Steel," Experimental Mechanics, Vol. 27, No. 1, March 1987, pp. 80-85.
34. Sadat, A.B., "Effect of High Cutting Speed on Surface Integrity of AISI 4340 during Turning," Materials Science and Technology, Vol. 6, 1990, pp. 371-375.
35. Sadat, A.B., and Reddy, M.Y., "Surface Integrity of Inconel -718 Nickel-base Superalloy Using Controlled and Natural Contact Length Tools. Part 1: Lubricated, Experimental M echanics, Vol. 32, No. 3, September 1992, pp. 282-288.
36. Shih, A, J., and Yang, H.T.Y., "Experimental and Finite Element Predictions of Residual Stress Due to Orthogonal Metal Cutting," International Journal for Numerical Methods in Engineering, Vol. 36, 1993, pp. 1489-1507.
37. Stovicek, D., "Hard- Part Turning Eliminates Grinding, Improves Quality," Tooling and Production, Feb. 1992, pp. 25-26.
38. Taylor, D., and Clancy, O.M., "The Fatigue Performance of Machined Surfaces," Fatigue and Fracture of Engineering Materials and Structures, Vol. 14, No. 2-3, 1991, pp. 329-336.
39. Torbaty, S., Moisan, A., Lebrun, J. L., and Maeder, G., "Evolution of Residual Stresses during Turning and Cylindrical Grinding of a Carbon Steel," Annals of CIRP, Vol. 31, No. 1, 1982, pp. 441-445.
40. Tricard, M., Residual Effects of Finishing Processes, ASM Handbook, Surface Engineering, 1990, Vol, 5, pp. 144-150.
41. Wakabayashi, M., and Nakayama, M., "Experimental Research on Elements Composing Residual Stresses in Surface Grinding," Bull. Japan Soc. of Free. Engg., Vol. 13, No. 2, 1979, pp. 75- 81.
42. Weindorf, T., "DBC50 for Finish Turning hardened HSS," Industrial Diamond Review, Vol. 48, pp. 112-1 14.
43. Wick, C., " Machining with PCBN Tools," Manufacturing Engineering, July 1988, pp. 73-78.
44. Wu, D. W. and Matsumoto, Y., " The Effect of Hardness on Residual Stress in Orthogonal Machining of AISl 4340 Steel," Journal of Engineering for Industry, Vol. 112, 1990, pp. 245-252.