Experimental analysis of near-crack-tip plastic flow and deformation characteristics (I): Polycrystalline aluminum

Journal of the Mechanics and Physics of Solids

Volumn 48, Issue 1, 2000, Pages 67-98

  Bastawros, Ashraf F ^a,b   Kim, Kyung S ^a  

^a Brown University   (United States)

^b IOWA STATE UNIVERSITY   (United States)

Author keywords

A. Crack tip plasticity; Anisotropic material; B. Crack mechanics; C. Optical interferometry; Polycrystalline material

Indexed keywords

EID: 0003072040     PISSN: 00225096     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-5096(99)00033-2     Document Type: Article

References (38)

1. ABAQUS Manual Version 5.5, 1995. Hibbitt, Karlsson and Sorensen Inc., Providence, Rhode Island.
2. Al-Ani, A.M., Hancock, J.W., 1991. J-Dominance in short cracks in tension and bending. J. Mech. Phys. Solids 39, 23-43.
3. Ashby, M., Jones, D., 1980. Engineering Materials I, An Introduction to Their Properties and Applications. Pergamon Press, Oxford, UK.
4. Bastawros, A-F., 1997. Experimental analysis of near-crack-tip plastic flow and deformation characteristics in single and polycrystalline metals. Ph.D. thesis, Division of Engineering, Brown University, Providence, RI.
5. Bastawros, A-F., Kim, K-S., 1999. Experimental analysis of near-crack-tip plastic flow and deformation characteristics (II): Hardened copper crystal. Submitted to J. Mech. Phys. Solids.
6. Cuitiño, A.M., Ortiz, M., 1996. Three-dimensional crack-tip fields in four-point bending copper single-crystal specimens. J. Mech. Phys. Solids 44, 863-904.
7. Dadkhah, M.S., Kobayashi, A.S., 1990. Further studies on the HRR field of a moving crack. An experimental analysis. Int. J. Plasticity 6, 635-650.
8. Du, Z-Z., Hancock, J.W., 1991. The effect of non-singular stresses on crack-tip constraint. J. Mech. Phys. Solids 39, 555-567.
9. Hayashi, K., 1979. Singular behavior at the tip of a crack in an elastic-plastic material with plastic orthotropy. J. Mech. Phys. Solids 27, 163-174.
10. Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic metals. In: Proc. Roy. Soc. London, Series A, p. 193.
11. Hill, R., 1950. The Mathematical Theory of Plasticity. Clarendon Press, Oxford.
12. Hill, R., 1979. Theoretical plasticity of textured aggregates. Math. Proc. Camb. Phil. Soc. 85, 179-191.
13. Hutchinson, J.W., 1968. Singular behavior at the end of a tensile crack in a hardening material. J. Mech. Phys. Solids 16, 13-31.
14. Hutchinson, J.W., 1983. Fundamentals of phenomenological theory of nonlinear fracture mechanics. J. App. Mech. 50, 1042-1051.
15. Kang, B.S., Kobayashi, A.S., Post, D., 1987. Stable crack growth in aluminum tensile specimen, Exp. Mech., pp. 234-245.
16. McMeeking, R.M., 1977. Finite deformation analysis of crack-tip opening in elastic-plastic materials and implications for fracture. J. Mech. Phys. Solids 25, 357-381.
17. McMeeking, R.M., Parks, D.M., 1979. On criteria for J-dominance of crack-tip fields in large-scale yielding. In: Elastic-Plastic Fracture: ASTM STP 668. American Society for Testing and Materials, Philadelphia, PA, pp. 175-194.
18. Moran, B., Ortiz, M., Shih, C.F., 1990. Formulation of implicit finite element methods for multiplicative finite deformation plasticity. Int. J. Num. Methods Eng. 29, 483-514.
19. Narasimhan, R., Rosakis, A.J., 1990. Three-dimensional effects near a crack tip in a ductile three-point bend specimen: Part I - A numerical investigation. J. Appl Mech. 57, 607-616.
20. Narasimhan, R., Rosakis, A.J., Moran, B., 1992. A three-dimensional numerical investigation of fracture initiation by ductile failure mechanisms in a 4340 steel. Int. J. Frac. 56, 1-24.
21. O'Dowd, N.P., Shih, C.F., 1991. Family of crack-tip fields characterized by a triaxiality parameter - I. Structure of fields. J. Mech. Phys. Solids 39, 989-1015.
22. O'Dowd, N.P., Shih, C.F., 1992. Family of crack-tip fields characterized by a triaxiality parameter - II. Fracture applications. J. Mech. Phys. Solids 40, 939-963.
23. Pan, J., 1986. Plane-strain crack-tip stress for anisotropic perfectly plastic materials. J. Mech. Phys. Solids 34, 617-635.
24. Pan, J., Shih, C.F., 1986. Plane-strain crack-tip fields for power-law hardening orthotropic materials. Mech. Mat. 5, 299-316.
25. Ramberg, W., Osgood, W.R., 1943. NACA Technical Report 902.
26. Rice, J.R., 1968a. A path independent integral and the approximate analysis of strain concentration by notches and cracks. J. Appl. Mech. 35, 379-386.
27. Rice, J.R., 1968b. Mathematical analysis in the mechanics of fracture. In: Liebowitz, H. (Ed.), Fracture: An Advanced Treatise, vol. II. Academic Press, New York, p. 191.
28. Rice, J.R., 1973. Plane strain slip line theory for anisotropic rigid/plastic materials. J. Mech. Phys. Solids 21, 63-74.
29. Rice, J.R., Rosengren, G.F., 1968. Plane strain deformation near a crack tip in a power-law hardening material. J. Mech. Phys. Solids 16, 1-12.
30. Rice, J.R., Johnson, M.R., 1969. The role of large crack tip geometry changes in plane strain fracture. In: Kanninen, M.F., Adler, W.F., Rosenfield, A., Jaffee, R. (Eds.), Inelastic Behavior of Solids. McGraw-Hill, New York, pp. 641-672.
31. Rice, J.R., Paris, P.C., Merkle, J.G., 1973. Some further results of J-integral analysis and estimates. In: ASTM STP 536. American Society for Testing and Materials, Philadelphia, PA, pp. 231-245.
32. IC on small specimens using critical crack tip opening displacement. In: Fracture Toughness and Slow-Stable Cracking: ASTM STP 559. American Society for Testing and Materials, Philadelphia, PA, pp. 139-158.
33. Shield, T.W., Kim, K-S., 1991. Diffraction theory of optical interference moiré and a device for production of variable virtual reference gratings: a moiré microscope, Exp. Mech, pp. 126-134.
34. Shih, C.F., 1981. Relation between the J-integral and the crack opening in elastic-plastic materials and implications for fracture. J. Mech. Phys. Solids 29, 305-326.
35. Shih, C.F., German, M.D., 1981. Requirements for a one parameter characterization of crack-tip fields by the HRR singularity. Int. J. Frac. 17, 27-43.
36. Sutton, M.A., Turner, J.L., Chad, Y.J., Bruck, H.A., Chae, T.L., 1992. Investigation of three-dimensional effects near a crack tip using computer vision. Int. J. Frac. 53, 201-228.
37. Symington, M., Shih, C.F., Ortiz, M., 1988. Tables of plain strain mixed-mode plastic crack-tip fields. Technical Report No. MRG/DMR-8714665/1, Division of Engineering, Brown University, Providence, RI, USA.
38. Zender, A.T., Rosakis, A.J., 1990. Three-dimensional effects near a crack tip in a ductile three-point bend specimen: Part II - An experimental investigation using interferometry and caustics. J. Appl. Mech. 57, 619-626.