Examination of key aspects defining the performance characteristics of out-of-plane joints in FRP marine structures

Composites Part A: Applied Science and Manufacturing

Volumn 27, Issue 2, 1996, Pages 89-103

  Junhou, Pei ^a   Shenoi, R A ^b  

^a CHINA SHIP SCIENTIFIC RESEARCH CENTER   (China)

^b UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

Creep; Design; Fatigue; Fibre reinforced plastic; Ship structures; Tee joints; Top hat stiffeners

Indexed keywords

EID: 0002882628     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/1359-835X(95)00021-S     Document Type: Article

References (54)

1. Shenoi, R.A. and Wellicome, J.W. (Eds), 'Composite Materials in Maritime Structures', Vols 1 and 2, Ocean Technology Series, Cambridge University Press, 1993
2. Godwin, E.W. and Matthews, F.L. Composites 1980, 11, 165
3. Matthews, F.L., Kilty, P.F. and Godwin, E.W. Composites 1982, 13, 29
4. Goland, M. and Reissner, E. J. Appl. Mech. 1944, 11, A-17
5. de Bruyne, N.A. Aircraft Eng. 1944, 16, A-17
6. Adams, R.D. in 'Proc. 2nd Int. Conf. Computer Aided Design in Composite Materials (CADCOMP)' Brussels, April 1990, p. 55
7. Harris, J.A. and Adams, R.D. Int. J. Adhesion and Adhesives 1984, 4, 65
8. Mylonas, C. Exper. Stress Anal. 1954, 12, 129
9. Tuzi, I. and Shimada, H. Bulletin JSME 1964, 1, 263
10. Wooley, G.R. and Carver, D.R. J. Aircraft October 1971, 817
11. Cowling, M.J., Hashim, S.A., Smith, E.M. and Winkle, I.E. in 'Proc. Int. Conf. Polymers in a Marine Environment', London. October 1991, p. 59
12. Lees, W.A. 'Adhesives in Engineering Design', The Design Council, London, 1984
13. Dodkins, A.R., Shenoi, R.A. and Hawkins, G.L. Marine Strutures 1994, 7, 365
14. Shenoi, R.A. and Hawkins, G.L. Composites 1992, 23, 335
15. Gibbs and Cox, 'Marine Design Manual for GRP', McGraw-Hill Book Company, New York, 1960
16. NES140, 'GRP Ship Design', Naval Engineering Standards. Issue 2 (undated)
17. Dixon, R.H., Ramsey, B.W. and Usher, PJ. in Proc. Symp GRP Ship Construction', RINA, London, October 1972. p. 1
18. Harrhy, J. in 'Proc Symp. GRP Ship Construction', RINA, London, October 1972, p. 57
19. Smith, C.S. in 'Proc. Symp. GRP Ship Construction', RINA, London, October 1972, p. 33
20. Lloyd's Register of Shipping, 'Rules for Yachts and Small Craft', London, 1983
21. American Bureau of Shipping, 'Rules for Building and Classing Reinforced Plastic Vessels', New York, 1978
22. Det Norske Veritas, 'Rules for Classification of High Speed Light Craft', Hovik (Norway), 1985
23. Det Norske Veritas, 'Tentative Rules for Classification of High Speed and Light Craft', Hovik (Norway), 1991
24. Green, E., 'Use of Fiber Reinforced Plastics in Marine Structures', Ship Structures Committee Report. SSC 360, June 1990
25. Registro Italiano Navale, 'Rules for the Construction of Reinforced Plastic Hulls' (in Italian). 1988
26. Nippon Kaiji Kyokai, 'Rules and Regulations for the Construction and Classification of Textile Glass Reinforced Polyester Vessels', 1984
27. USSR Register of Shipping, 'Rules for the Classification and Construction of Sea-Going Ships, Part XVI: Hull Structure of Glass-Reinforced Plastic Ships and Boats' (undated)
28. China Bureau of Shipping, 'Rules for Building Fibre-Reinforced Plastic Vessels', Beijing, 1991
29. Lloyd's Register of Shipping, 'Provisional Rules for the Classification of High Speed Catamarans', 1990
30. Smith, C.S., 'Design of Marine Structures in Composite Materials'. Elsevier Applied Science, London, 1990
31. Maske, E.B., 'Wing/Inlet Composite Advanced Development'. AFFDL-TR-70-88, Air Force Flight Dynamics Laboratory, Wright-Patterson AFB, 1976
32. Gillespie Jr, J.W. Master's Thesis. Department of Mechanical and Aerospace Engineering, University of Delaware, Newark, Delaware, 1978
33. Gillespie, J.W. and Byron-Pipes, R. J. Compos. Mater. 1978, 12, 408
34. Violette, F., 'An Investigation into the Behaviour of Structural Composite Hull Bulkhead Joints', Department of Ship Science Report, University of Southampton, 1988
35. Shenoi, R.A. and Violette, F.L.M. J. Compos. Mater. 1990, 24, 644
36. Shenoi, R.A. and Hawkins, G.L. Compos. Structures 1995, 30, 109
37. Green, A.K. and Bowyer, W.H. Composites 1981, 12, 49
38. Smith, C.S. and Pattison, D. in 'Proc. Conf. Designing with Fibre Reinforced Materials', C230/77 I Mech E, London, 1977
39. Harris, A.J. Trans. RINA, 1980, 122, 485
40. Millman, A.F. in 'Symp. Jointing in Fibre Reinforced Plastics', Imperial College, London, September 1978
41. Bird, J. and Bashford, D. in 'Proc. Composites - 88: World Conference on Composite Structures', Nice. France, June 1988, p. 357
42. Bashford, D.P., 'The Development of Improved Frame to Hull Bonds for GRP Ships', Final Report on M.o.D Contract NSM 42A/0907. Fulmer Research Laboratories, Slough, February 1986
43. Norwood, L.S. in 'Sandwich Constructions' (Eds K.A. Olsson and R.P. Reichard), EMAS, 1989, p. 279
44. Hawkins, G.L., Holness, J.W., Dodkins, A.R. and Shenoi, R.A. Plastics, Rubber and Compos. Process. Applic. 1993, 19, 279
45. 'GRP Boundary Angles Strength Tests', Vosper Thorncroft Report No. D/89-452, UK, March 1989
46. Barnes, D.W., 'Full Scale Tests on GRP Boundary Angles', Vosper Thornycroft Report No. D/89-455, UK, August 1989
47. Cui, W.C., Lui, T. and Liu, J.H., 'Experimental Research on the Representative Connections used for MCMVs Made in GRP', China Ship Scientific Research Center Report, Wuxi, Jiangsu, 1994
48. Elliolt, D.M., 'Mechanical Testing of Composite Joints: Interim Report', DRA/AW AWS/TR94212, April 1994
49. Patte, W.D. and Reichard, R.P. in 'Proc. 2nd Int. Conf. Marine Applications of Composite Materials'. Florida, March 1988, p. G1
50. Lyson, J.D. J. Naval Sci. 1979, 5, 182
51. Hall, D.J. and Robson, B.L. Composites 1984, 15, 266
52. Crabbe, D.R. and Kerr, G.T., 'Static and Short-Term Creep Tests on GRP Ship Type Connections for MCMV, Report No. NVRE/N236, March 1976
53. Scholte, H.G. and van Leeuwen, R.T., 'Investigation on the Behaviour under Fatigue Loading of Orthogonally Placed Plates of Glass Reinforced Polyester', Technical University of Delft Report No. 211, November 1977
54. Shenoi, R.A., Read, P.J.C.L. and Hawkins, G.L. Int. J. Fatigue 1995, 17(6), 415