A general correlation for heat transfer during dispersed-flow film boiling in tubes

Heat Transfer Engineering

Volumn 21, Issue 4, 2000, Pages 18-32

  Shah, M Mohammed ^a   Siddiqui, M Altamush ^b  

^a Aligarh Muslim University ^*  (Saudi Arabia)

^b ALIGARH MUSLIM UNIVERSITY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0002767395     PISSN: 01457632     EISSN: 15210537     Source Type: Journal    
DOI: 10.1080/01457630050144479     Document Type: Article

References (60)

1. Andreani, M., and Yadigaroglu, G., Prediction Methods for Dispersed Flow Film Boiling, Int. J. Multiphase Flow, vol. 20, suppl., pp. 1-51, 1994.
2. Chen, J. C., and Costigan, G., Review of Post-Dryout Heat Transfer in Dispersed Two-Phase Flow, in G. F. Hewitt et al. (eds.), Post-Dryout Heat Transfer, CRC Press, Ann Arbor, MI, 1992.
3. Shah, M. M., Forced Convection Boiling, in Genium Heat Transfer and Fluid Flow Data Books, Genium, Schenectady, NY, 1992.
4. Groeneveld, D. C., and Snoek, C. W., A Comprehensive Examination of Heat Transfer Correlations Suitable for Reactor Safety Analysis, in G. F. Hewitt et al. (eds.), Multiphase Science and Technology, vol. 2, Hemisphere, Washington, DC, 1986.
5. Groeneveld, D. C., Post-DryoutHeatTransferatReactorOper- ating Conditions, Atomic Energy of Canada Ltd. Rep. AECL- 4513, 1973.
6. Bennet, A. W., Hewitt, G. F., Kearsey, H. A., and Keeys, R. K. F., Heat Transfer to Steam-Water Mixtures Flowing in Uniformly Heated Tubes in Which the Critical Heat Flux Has Been Exceeded, AERE R 5373, 1967.
7. Forslund, R. P., and Rohsenow, W. M., Dispersed Flow Boiling, J. Heat Transfer, vol. 90, no. 11, pp. 399-407, 1968.
8. Yoder, G. L., Jr., and Rohsenow, W. M., A Solution for Dispersed Flow Heat Transfer Using Equilibrium Fluid Conditions, J. Heat Transfer, vol. 105, pp. 10-17, 1983.
9. Andreani, M., and Yadigaroglu, G., A 3-D Eulerian- Lagrangian Model of Dispersed Flow Film Boiling Including a Mechanistic Description of the Droplet Spectrum Evolution- 1, the Thermal Hydraulic Model, Int. J. Heat Mass Transfer, vol. 40, pp. 1753-1772, 1997.
10. Groeneveld, D. C., and Delorme, G. G. J., Prediction of Thermal Non-Equilibirium in the Post-Dryout Regime, Nuclear Eng. Des., vol. 36, pp. 17-26, 1976.
11. Saha, P., A Non-Equilibirium Heat Transfer Model for Dispersed Droplet Post-Dryout Regime, Int. J. Heat Mass Transfer, vol. 23, pp. 483-493, 1980.
12. Hein, D., and Kohler, W., A Simple-to-Use Post Dryout Heat Transfer Model Accounting for Thermal Non-Equilibrium, First Int. Heat Transfer Workshop on Fundamental Aspects of Post-Dryout Heat Transfer, Salt Lake City, UT, NUREG/CP- 0060, 2-4 April 1984.
13. Katsounis, A., Post Dryout Correlations and Models Compared to Experimental Data from Different Fluids, in J. Bougard and N. Afgan (eds.), Heat and Mass Transfer in Refrigeration and Cryogenics, Hemisphere, Washington, DC, 1987.
14. Shah, M. M., A General Predictive Technique for Heat Transfer during Saturated Film Boiling in Tubes, Heat Transfer Eng., vol. 2, pp. 51-62, 1980.
15. Hammouda, N., Groenevald, D. C., and Cheng, S. C., An Experimental Study of Subcooled Film Boiling of Refrigerants in Vertical Upflow, Int. J. Heat Mass Transfer, vol. 39, no. 18, pp. 3799-3812, 1996.
16. Varone, A. F., and Rohsenow, W. M., Post Dryout Heat Transfer Prediction, Nuclear Eng. Des., vol. 95, pp. 315-327, 1986.
17. Bailey, N. A., Collier, J. G., and Ralph, J. C., Post-Dryout Heat Transfer in Nuclear and Cryogenic Equipment, AERE- R7519, 1973. Quoted in G. F. Hewitt, Heat Transfer in High- Quality Two-Phase Flows, in J. J. Ginoux (ed.), Two-Phase Flows and Heat Transfer with Application to Nuclear Reactor Design Problems, p. 130, Hemisphere, Washington, DC, 1978.
18. Chen, Y., An Investigation of Dispersed Flow Film Boiling Heat Transfer of Water, in J. F. Kefer et al. (eds.), Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1991, Proc. Second World Conference on Experimental Heat Transfer, Fluid Mechanics, Thermodynamics, Dubrovnik, Croatia, 1991.
19. Hynek, S. J., Rohsenow, W. M., and Bergles, A. E., Forced Convection Dispersed Flow Film Boiling, M. I. T. Dept. of Mechanical Engineering Rep. 70586-63, 1969.
20. Soo, S. L., Pipe Flow, in G. Hetsroni (ed.), Handbook of Multiphase Systems, pp. 3-24 to 3-30, Hemisphere, Washington, DC, 1982.
21. Shah, M. M., Improved General Correlation for Critical Heat Flux during Upflow in Uniformly Heated Vertical Tubes, Int. J. Heat Fluid Flow, vol. 8, pp. 326-335, 1987.
22. Shah, M. M., A New Correlation for Heat Transfer during Boiling Flow through Pipes, ASHRAE Trans., vol. 82, part 2, pp. 66-86, 1976.
23. Griffith, P., and Wallis, G. B., Two-Phase Slug Flow, J. Heat Transfer, vol. 83, pp. 307-320, 1961.
24. Hewitt, G. F., Heat Transfer in High-Quality Two-Phase Flows, in J. G. Ginoux (ed.), Two-Phase Flow and Heat Transfer, pp. 111-132, McGraw-Hill, New York, 1978.
25. Annuziatio, A., Cumo, M., and Pallazi, G., Post-Dryout Heat Transfer in Uncovered Core Accidents, in M. Merilo (ed.), Thermal Hydraulics of Nuclear Reactors, vol. 1, pp. 335-342, American Nuclear Society, 1983. (Additional data sheets pro- qi vided by the authors.)
26. Evans, D., Webb, S. W., and Chen, J. C., Axially Varying Vapor Superheats in Convective Film Boiling, J. Heat Transfer, vol. 107, pp. 663-669, 1985.
27. Gottula, R. C., Nelson, R. A., Chen, J. C., Neti, S., and Sundaram, R. K., Forced Convective Non-Equilibirium Post- CHF Heat Transfer Experiments in a Vertical Tube, ASME- JSME Thermal Engineering Conf., Honolulu, HI, 1983.
28. Bhatti, M. S., and Shah, R. K., Turbulent and Transition Flow Convective Heat Transfer in Ducts, in S. Kacak, R. K. Shah, and W. Aung (eds.), Handbook of Single-Phase Heat Transfer, chap. 4, Wiley, New York, 1987.
29. Hallader, G., and Bannerjee, S., Heat Transfer to Superheated Steam in Round Tubes, AECL unpublished report, 1969. Quoted in Groenevald and Delorme [10].
30. Gnielinski, V., New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, Int. Chem. Eng., vol. 16, pp. 359-368, 1976. Quoted in Bhatti and Shah [28].
31. Pethukov, B. S., and Kirillov, V. V., The Problems of Heat Exchange in the Turbulent Flow of Liquids in Tubes (in Russian), Teploenergetika, vol. 4, no. 4, pp. 63-68, 1958. Quoted in Bhatti and Shah [28].
32. Koizumi, Y., Ueda, T., and Tanaka, H., Post-DryoutHeat Transfer to R-113 Upward Flow in a Vertical Tube, Int. J. Heat Mass Transfer, vol. 22, pp. 669-678, 1979.
33. Meyers, C. A., McClintock, R. B., Silvestri, C. J., and Spencer, R. C., ASME Steam Tables, 6th ed., ASME, New York, 1993.
34. ASHRAE Handbook 1981 Fundamentals, ASHRAE, Atlanta, GA, 1981.
35. Vargaftik, N. B., Tables on the Thermophysical Properties of Liquids and Gases, 2d ed., Wiley, New York, 1975.
36. McCarty, R. D., Thermophysical Properties of Helium-4 from 2 to 1500 K with Pressures to 1000 Atmospheres, NBS-TN- 631, National Technical Information Service, Springfield, VA, 1972.
37. Beaton, C. F., and Hewitt, G. F., Physical Property Data for the Chemical and Mechanical Engineer, Hemisphere, New York, 1989.
38. Nishikawa, K., Yoshida, S., Mori, H., and Takamatsu, H., An Experiment on the Heat Transfer Characteristics in the Post-Burnout Region at High Subcritical Pressures, ASME- JSME Thermal Engineering Conf., vol. 1, pp. 159-164, 1983.
39. Spiegler, P., Hopenfeld, J., Silberberg, M., Bumpus, C. F., and Norman, A., Onset of Stable Film Boiling and Foam Limit, Int. J. Heat Mass Transfer, vol. 6, pp. 987-994, 1963. Quoted in Groenevald and Snoek [4].
40. Nijhawan, S., Chen, J. C., and Sundaram, R. K., Parametric Effects on Post-Dryout Heat Transfer, ASME Paper 80-WA/HT- 50, 1980.
41. Nijhawan, S., Chen, J. C., Sundaram, N. K., and London, E. J., Measurement of Vapor Superheat in Post-Critical Heat Flux Boiling, J. Heat Transfer, vol. 102, pp. 465-470, 1980.
42. McAdams, W. H., Heat Transmission, 3d ed. McGraw-Hill, New York, 1954.
43. Kastner, W., Kohler, W., Kratzner, W., and Hein, D., Warmeu- bergang in Post Dryout-Bereich in Vertikalen und Horizontlen Rohren bei gleichformiger Beheizung KWU-Abschlussbericht zum Forderungevorhaben, BMFT ET1409 A, 1981.
44. Kohler, W., Einfluss des Benetzungszustandes der Heizflaeche auf Waermeubergang und Druckverlust in einem Verdampferrohr, Dr. Ing. Dissertation, Technical University of Munich, Germany, 1984.
45. Schnittger, R. B., Untersuchungen zum Warmeubergang bei Vertikalen und Horizontalen Rohrstromungen in Post- Dryout-Bereich, Dissertation, Universitat Hannover, Germany, 1982.
46. Ling, C. H., Becker, K. M., Hedberg, S., and Strand, G., Temperature Distribution for the Post-Burnout Regime in a Round Tube, Royal Institute of Technology, Laboratory of Nuclear Engineering Rep. KTH-NEL-16, Stockholm, 1971. Quoted in Saha [11].
47. Nishikawa, K., Yoshida, S., Mori, H., and Takamatsu, H., Post- Dryout Heat Transfer to Freon in a Vertical Tube at High Sub- critical Pressures, Int. J. Heat Mass Transfer, vol. 29, pp. 1245-1251, 1986.
48. Era, A., Heat Transfer Data in the Liquid Deficient Region for Steam-Water Mixtures at 70 kg/cm2 Flowing in Tubular and Annular Conduits, CISE-R-184, 1967. Quoted in Groeneveld and Delmore [10] and Saha [11].
49. Herkenrath, H., Mork-Morkenstein, P., Jung, U., and Wecker- man, F. J., Warmeubergang an Wasser bei Erzwungener Stro- mung in Druckbereich von 140 bis 250 Bar, EUR-3658d, 1967. Quoted in Groeneveld and Delorme [10].
50. Bishop, A. A., Sandberg, R. O., and Tong, L. S., Forced Convective Heat Transfer at High Pressure after the Critical Heat Flux, ASME Paper 65-HT-31, 1965.
51. Schmidt, K. R., Thermodynamic Investigations of Highly Loaded Boiler Heating Surfaces, AEC-Tr-4033, 1960. Quoted in Groeneveld and Delorme [10].
52. Swenson, H. S., Carver, J. R., and Szoeke, G., The Effects of Nucleate Boiling versus Film Boiling on Heat Transfer in Power Boiler Tubes, J. Eng. Power, pp. 365-371, October 1962.
53. Ogata, H., and Sato, S., Forced Convection Heat Transfer to Boiling Helium in a Tube, Cryogenics, vol. 14, p. 375, 1974.
54. Glickstein, M. R., Personal communication, 1967. Quoted in Hynek et al. [19].
55. Laverty, W. F., and Rohsenow, W. M., Film Boiling of Saturated Nitrogen Flowing in a Vertical Tube, J. Heat Transfer, vol. 89, no. 2, pp. 90-98, 1967.
56. Cumo, M., Farello, G. E., and Ferrai, G. The Influence of Curvature in Post Dry-Out Heat Transfer, Int. J. Heat Mass Transfer, vol. 15, pp. 2045-2062, 1972.
57. Groenveld, D. C., The Thermal Behavior of a Heated Surface at and Beyond Dryout, AECL-4309, 1972.
58. Janssen, E., and Kervinnen, J. A., Film Boiling and Rewetting, General Electric Rep. NEDO-20975, 1975. Quoted in Saha
59. Cheng, X., Erbacher, F. J., and Muller, U., Critical Heat Flux in Uniformly Heated Vertical Tubes, Int. J. Heat Mass Transfer, vol. 40, no. 12, pp. 2929-2939, 1997.
60. Kefer, V., Kohler, W., and Kastner, W., Critical Heat Flux (CHF) and Post-CHF Heat Transfer in Horizontal and Inclined Evaporator Tubes, Int. J. Multiphase Flow, vol. 15, no. 9, pp. 385-392, 1989.