Three-Dimensional Calculations of the Flow Field around a Turbine Blade with Film Cooling Injection near the Leading Edge

Flow, Turbulence and Combustion

Volumn 66, Issue 1, 2001, Pages 57-83

  Theodoridis, G S ^a,b   Lakehal, D ^a,c   Rodi, W ^a  

^a UNIVERSITY OF KARLSRUHE   (Germany)

^b AIAS Research Ltd   (Greece)

^c ETH ZURICH   (Switzerland)

Author keywords

Computational fluid mechanics; Film cooling; Showerhead injection; Turbulence modelling; Velocity field

Indexed keywords

EID: 0002602591     PISSN: 13866184     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1011437523546     Document Type: Article

References (37)

1. Mehendale, A.B. and Han, J.C., Influence of mainstream turbulence on leading edge film cooling heat transfer. ASME, Journal of Turbomachinery 114 (1992) 707-715.
2. Gartshore, I., Salcudean, M., Barnea, Y., Zhang, K. and Aghdasi, F., Some effects of coolant density on cooling effectiveness. ASME 93-GT-76 (1993).
3. Beeck, A., Strömungsfelduntersuchungen zum aerodynamischen Verhalten eines hochbelasteten Turbinengitters mit Kühlluftausblasung an der Vorderkante. Dissertation Universität der Bundeswehr München, Institut für Strahlantriebe (1992).
4. Haslinger, W. and Hennecke, D.K., High resolved distribution of adiabatic film cooling effectiveness for turbine leading edge film cooling. Paper ISABE-97-7113 (1997).
5. Ligrani, P.M.. Wigle, J.M. and Jackson, S.W., Film-cooling from holes with compound angle orientations: Part 2 - Results downstream a single row of holes with 6d spanwise spacing. ASME, Journal of Heat Transfer 116 (1994) 353-362.
6. Honami, S., Shizawa, T. and Uchiyama, A., Behaviors of the laterally injected jet in film cooling: Measurements of surface temperature and velocity/temperature field within the jet. ASME paper 92-GT-180 (1992).
7. Kohli, A. and Bogart, D.G., Adiabatic effectiveness, thermal fields, and velocity fields for film cooling with large angle injection. ASME Journal of Turbomachinery 119 (1995) 352-358.
8. Findlay, M.J., Salcudean, M. and Gartshore, I.S., Jets in a crossflow - Effects of geometry and blowing ratio. ASME, Journal of Fluids Engineering 121 (1999) 373-378.
9. Ardey, S., 3D-Messung des Strömungsfeldes um die filmgekühlte Vorderkante einer Referenzschaufel. Abschlussbericht zum TURBOTHERM II-Verbundvorhaben 2.1.8.4 der Arbeitsgemeinschaft Hochtemperatur Gasturbine. Bericht LRT-Inst. 12-98/02, Universität der Bundeswehr München (1998).
10. Benz, E., Wittig, S., Beeck, A. and Fottner, L., Analysis of cooling jets near the leading edge of turbine blades. In: 72nd Fluid Dynamic Panel Meeting and Symposium on Computational and Experimental Assessment of Jets in Cross Flow, Winchester, U.K. AGARD Conference Proceedings 534, paper No. 37 (1993).
11. Vogel, D.T., Navier-Stokes calculation of turbine flows with heat transfer and film cooling. In: International Symposium Gas Turbines, Bled, Slovenia (1993).
12. Irmisch, S., Simulation of film-cooling aerodynamics with a 2-D Navier Stokes solver using unstructured grids. ASME 95-GT-024 (1995).
13. Launder, B.E. and Spalding, D.B., The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering 3 (1974) 269-289.
14. Lam, C.K.G. and Bremhorst, K., A modified form of the k-ε model for predicting wall turbulence. ASME, Journal of Fluids Engineering 103 (1981) 456.
15. Theodoridis, G. and Rodi, W., Calculation of the flow around a high-pressure turbine blade with cooling-jet injection from slots at the leading edge. Flow, Turbulence and Combustion 62 (1999) 89-110.
16. Garg, V.K. and Ameri, A.A., Comparison of two-equation turbulence models for prediction of heat transfer on film-cooled turbine blades. Numerical Heat Transfer, Part A 31 (1997) 347-371.
17. Garg, V.K., Heat transfer on a film-cooled rotating blade using different turbulence models. International Journal of Heat and Mass Transfer 42 (1999) 789-802.
18. Garg, V.K. and Rigby, D.L., Heat transfer on a film-cooled blade-effect of hole physics. International Journal of Heat and Fluid Flow 20 (1999) 10-25.
19. Bohn, D., Becker, V., Kusterer, K., Ardey, S. and Fottner, L., The influence of slot ejection and showerhead ejection on the 3-D flow field of a film-cooled turbine blade under consideration of side wall effects. Paper AIAA-97-7162 (1997).
20. Lakehal, D., Theodoridis, G. and Rodi, W., Computation of film cooling of a flat plate by lateral injection from a row of holes. International Journal of Heat and Fluid Flow 19 (1998) 418-430.
21. Lakehal, D., Theodoridis, G. and Rodi. W., Calculations of film cooling at the leading edge of a turbine blade model with an anisotropic eddy viscosity/diffusivity model. Ercoftac Bulletin 40 (1999) 33-38.
22. Lakehal, D., Theodoridis, G. and Rodi, W., Three dimensional flow and heat transfer calculations of film cooling at the leading edge of a symmetrical turbine blade model. International Journal of Heat and Fluid Flow (to appear).
23. Bergeles, G., Gosman, A.D. and Launder, B.E., The turbulent jet in a cross stream at low injection rates: A three-dimensional numerical treatment. Numerical Heat Transfer 1 (1978) 217-242.
24. Demuren, A.O., Rodi, W. and Schönung, B., Systematic study of film cooling with a three-dimensional calculation procedure. ASME Paper 85-IGT-2 (1985).
25. Zhou, J.M., Salcudean, M. and Gartshore, I.S., Prediction of film cooling by discrete hole injection. ASME Paper 93-GT-75 (1993).
26. Majumdar, S., Rodi, W. and Zhu, J., Three-dimensional finite-volume method for incompressible flows with complex boundaries. ASME, Journal of Fluids Engineering 114 (1992) 496.
27. Zhu, J., An introduction and guide to the computer program FAST-3D. Report No. 691, Institute for Hydromechanics, University of Karlsruhe (1992).
28. Rhie, C.M. and Chow, W.L., Numerical study of the turbulent flow past an airfoil with trailing edge separation. AIAA Journal 21 (1983) 1525-1532.
29. Leonard, B.P., A stable and accurate convective modelling procedure based on quadratic upstream interpolation. Computer Methods in Applied Mechanics and Engineering 19 (1979) 59-98.
30. Zhu, J., A low-diffusion and oscillation-free convection scheme. Communications on Applied Numerical Methods 7 (1991) 225-232.
31. Patankar, S.V. and Spalding, D.B., A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. International Journal of Heat and Mass Transfer 15 (1972) 1778.
32. Stone, H.L., Iterative solution of implicit approximation of multidimensional partial differential equations. SIAM Journal on Numerical Analysis 5 (1968) 530.
33. Karki, K.C. and Patankar, S.V., Pressure based calculation procedure for viscous flows at all speeds in arbitrary configurations. AIAA Journal 27 (1989) 1167-1174.
34. Michelassi, V., Theodoridis G. and Papanicolaou E.L., Low-speed turbine flow computation by pressure-correction and time marching methods. In: Ng, W. (ed.), Computational Fluid Dynamics in Aeropropulsion, ASME AD-Vol. 49. ASME, New York (1995) pp. 127-138.
35. Rodi, W., Theodoridis, G. and Lakehal, D., Entwicklung eines geeigneten Turbulenz- und Wärmeübergansmodells für ein 3-D Berechnungsverfahren der Filmkühlung an der Schaufelvorderkante. BMBF Vorhaben 0326760D Turbotherm II (1997).
36. Michelassi, V., The Meshho program 1.06. Report No. 1-1994, Department of Energetics, University of Florence, Italy (1994).
37. ICEM CFD/CAE 3.3.2, ICEM Systems GmbH, Germany (1997).