Wear of power plant components due to impact and sliding

Applied Mechanics Reviews

Volumn 50, Issue 7, 1997, Pages 387-411

  Ko, P L ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001697344     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101724     Document Type: Article

References (160)

1. Antunes J, Axisa F, and Vento MA (1990), Experiments on vibro-impact dynamics under fluidelastic instability, ASME PVP Conf Symp on Flow-Induced Vibration, Nashville, J Pressure Vessel Tech 189, 119.
2. Archard JF (1953), Contact and rubbing of flat surfaces, J Appi Phys 24, 24.
3. Archard JF and Hirst W (1956), Wear of metals under unlubricated conditions, Proc Royal Soc (London) 236A, 397.
4. Amell RD, Davies PB., Hailing J, and Whomes TL (1991), Trihology -Principles and Design Applications, Macmillan Education Ltd., U.K.
5. Axisa F, Desseaux A, and Gibert RJ (1984), Experimental study of tubesupport impact forces in multi-span PWR steam generator tubes, ASME Special Pub, Symp on Flow-Induced Vibrations: Vol 3 Vibration in Heat Exchangers, G00269, 139-148.
6. Axisa F, Antunes J, and Villard B (1988), Overview of numerical methods for predicting flow-induced vibration, J Pressure Vessel Tech 110, 614.
7. Axisa F, Paurobally A, and Remond A (1989), Predictive analyses of flow-induced vibration and fretting wear in steam generator tubes, Proc, Int Symp on Pressure Vessel Technology and Nuclear Codes and Standards, Seoul, Korea, 2-57 - 2-75.
8. Barwell FT (1978), Wear of machine elements, Proc Int Confon Fundamentals ofTribology, Suh NP and Saka N (eds), MIT, USA, 401-441.
9. Black AJ, Kopalinsky EM, and Oxley PLB (1993), Asperity deformation models for explaining the mechanisms involved in metallic sliding friction and wear - A review, Proc, Inst Mech Eng, J Mech Eng Sci, PartC 207,335-353.
10. Blevins RD (1979), Fretting wear of heat exchanger tubes, Part 1: Experiments and Part 11: Model, J Eng Power 101, 625-633.
11. Blevins RD (1983), Vibration-induced wear of heat exchanger tubes, J Eng Mat and Tech 107(1), 61-67.
12. Blevins RD (1984), Rational algorithm for predicting vibration-induced damage to tube and shell heat exchangers, ASME Publ #G00269 Symp on Flow-Induced Vibration, Vol 3, 87-101.
13. Bonfanti F and Gadda F (1969), Results on zircaloy-2 corrosion tests carried out with laboratory equipment, CISE-R-287.
14. Boucher KM and Taylor CE (1996), Tube support effectiveness and wear damage assessment in the u-bend region of nuclear steam generators, ASME Publ, PVP-Vol 328, 285-296.
15. Bowden FP and Tabor D (1954) (1964), Friction and Lubrication of Solids, Part I and Part II, Clarendon Press, Oxford.
16. Bower AF and Johnson KL (1991), Plastic flow and shakedown of the rail surface in repeated wheel-rail contact, Wear 144(1,2), 1-18.
17. Burwell, J.T (1957/1958), Survey of possible wear mechanisms, Wear, Vol I, 119-141.
18. Burwell JT and Strang CD (1953), Metallic wear, Proc Royal Soc (London) 212A, 470-477.
19. Cha JH, Wambsganss MW, and Jendrzejczyk JA (1987), Experimental study on impact/fretting wear in heat exchanger tubes, Trans ASME, J of Pressure Vessel Tech 109(3), 265-274.
20. Chen SS (1991), Review of dynamic tube/support interaction in heat exchanger tubes, Trans IMechE 5th Int Con/on Flow Induced Vibration, Brighton, UK, Paper C416/012, 111-120.
21. Chen SS, Rosenberg GS, and Wambsganss MW (1970), Tube-baffle impact during heat exchanger tube vibration, ASME Special Publ, HTD -70 Flow Induced Vibration in Heat Exchangers, New York.
22. Chen SS, Jendrzejczyk JA, and Wambsganss MW (1984), Dynamics of tubes in fluid with tube-baffle interaction, ASME Publ, Symp on Flow-Induced Vibrations, Vol 2, 285-304.
23. Childs THC (1988), Mapping of metallic sliding wear, Proc Inst Mech Eng, London 202, 379-395.
24. Connors HJ (1981), Flow-induced vibration and wear of steam generator tubes, Nucl Tech 55, 311 -331.
25. Connors HJ (1991), U-bend shaker test investigation of tube-avb wear potential, Proc of IMechE Confon Flow-Induced Vibrations, Brighton, UK, 57-67.
26. Dang-Van K (1993), Macro-micro approach in high-cycle multiaxial fatigue in Advances in Multiaxial Fatigue ASTM STP 1191, 120-130.
27. Davis SM and Mercer WL (1965), Fretting and corrosion of zircaloy-2 in steam, atomic power constructions Ltd (U.K.) Report No TRG-1094.
28. Degli Espinosa P, Lelli G, Possa G, and Vanoli G (1978), Fuel string dynamics and pressure tube fretting corrosion in the CIRENE power, channel, Int Confon Vibration in Nuclear Plant, Keswick, UK.
29. De Langre E, Beaufils B, and Antunes J (1991), Numerical prediction of vibrations in tube bundles induced by cross-flow turbulence, Proc IMechE., Int Confon Flow-Induced Vibrations, Brighton, UK.
30. DePaul D (1956), Corrosion and Wear Handbook, McGraw-Hill.
31. Don J and Rigney DA (1985), Prediction of debris flake thickness, Wear 105(1), 63-72.
32. Dupont F and Finnie I (1990), Simulation of sliding wear by cyclic deformation: microstructural aspects, Wear 140, 93-106.
33. Engel PA (1978), Impact Wear of Materials, Elsevier, New York.
34. Eyre TS (1978), Mechanisms of wear, Trib Int 11(2), 91-96.
35. Finkin EE (1970), What Happens when parts wear, Machine Des 42, 148-154.
36. Fisher NJ and Ingham B (1989), Measurement of tube-to-support dynamic forces in fretting-wear rigs, J Pressure Vessel Tech 111, 385-393.
37. Fisher NJ, Olesen J, Rogers RJ, and Ko PL (1989), Simulation of tube-to-support dynamic interaction in heat exchange equipment ASME Pub-lication UG00445 Flow-Induced Vibration in Heat-Transfer Equipment - Vol 5, pp 121-136.
38. Fisher NJ, Taylor CE, and Pettigrew MJ (1990), Fuel-element vibration and bearing pad to pressure tube fretting, atomic energy of Canada Limited report, AECL 10164.
39. Fisher NJ, Chow, AB, and Weckwerth MK (1994), Experimental fretting-wear studies of steam generator materials, ASME, PVP Vol 273, 241 -255.
40. Foster, J (1971), Materials for wear resistant surfaces, Nucl Eng Des 17(2), 205-246.
41. Frick TM, Sobek TE, and Reavis JR (1984), Overview on the development and implementation of methodologies to compute vibration and wear of steam generator Tubes, ASME Publication UG00269 Symp on Flow-Induced Vibrations, Vol 3, 149-161.
42. Flicker HW (1972), Fretting in tube supports of heat exchangers, IMechE London, Confon Component Design in High Temperature Reactors using Helium as a Coolant, Proc Paper #5.
43. Gaul DJ and Duquette DJ (1980), Cyclic wear behavior(fretting) of a tempered martensite steel, ASM Metallurgical Trans A Vol 11 A, 15811588.
44. Glardon R and Finnie I (1981), Review of the recent literature on the unlubricated sliding wear of dissimilar metals, Trans ASME, J of Eng Mat and Tech 103(4), pp 333-340.
45. Godet M (1982), Extrapolation in tribology. Wear 77(1), 29-44.
46. Godet M (1990), Third-bodies in tribology, Wear 136(1), 29-45.
47. Godet M and Berthier Y (1987), Continuity and Dry Friction: an Osborne Reynolds Approach in Fluid Film Lubrication - Osborne Reynolds Centenary, Dowson D, Taylor CM, Godet M, and Berthe D (eds) Elsevier Trib Series 11, Amsterdam.
48. Godet M, Berthier Y, Lancaster J, and Vincent L (1991), Wear modeling: using fundamental understanding or practical experience?, Proc, Int Confon Wear of Materials ASME, 521-529.
49. Gordellier SC and Chivers, TC (1979), Literature review of palliatives for fretting fatigue, Wear 56, 177-190.
50. Goyder HGD (1982), Measurements of the natural frequencies and damping of loosely supported tubes in heat exchangers, Proc of Vibration in Nuclear Plants-3rd Keswick Conf England.
51. Guinot J (1989), Etude bibliographique des travaux expérimentaux menés sur l’usure par impacts-glissements, Influence des principaux paramétrés, Electricité de France, Direction des Etudes et Recherches, Report No HT.22/89-22A.
52. Guérout F and Zbinden M (1993), etude bibliographique des modèles d’usure - revue des coefficients d’usure disponibles pour l’etude de l’endommagement des tubes de générateurs de vapeur. Electricité de France, Direction des Etudes et Recherches, Report No HT.22/93-56A.
53. Guérout F, Fisher NJ, Grandison DA, and Weckwerth MK (1996), Effect of temperature on steam generator fretting-wear, ASME Publ, PVP-Vol 328, Flow-Induced Vibration -1996, 233-246.
54. Hailing J (ed), 1975, Principles of Tribology, Macmillan Press, London.
55. Hailing J (1983), Toward a mechanical wear equation, J Trib 105, 212-220
56. Ham G, Rubin CA, Hahn GT, and Bhargava V (1988), Elasto-plastic finite element analysis of repeated two-dimensional rolling-sliding contacts, J Trib 110, 44-49.
57. Haslinger KH, Martin ML, and Steininger DA (1987), Pressurized water reactor steam generator tube wear prediction utilizing experimental techniques, Proc, IMech.E., Int Conf on Flow Induced Vibrations, Bowness-on-Windermere, England, Paper K2, 437-448.
58. Haslinger KH and Martin ML (1988), Experimental investigation into the non-linear dynamic behavior of a u-tube bundle with dynamically active support strips, ASME Publ, 1988 Int Symp on Flow-Induced Vibration and Noise, Vol 5, 219-234.
59. Haslinger KH and Steininger DA (1995), Experimental characterization of sliding and impact friction coefficients between steam generator tubes and AVB supports, J Sound Vib 181(5), 851-871.
60. Hokkirigawa K and Kato K (1988), Experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear, Trib Int 21(1), 51-57.
61. Hoeppner DW and Gates FL (1981), Fretting fatigue considerations in engineering design, Wear 70(2), 155-164.
62. Hofmann PJ, Schettler T, and Steininger DA (1986), Pressurized water reactor steam generator tube fretting and fatigue wear characteristics ASME Pressure Vessel and Piping Conference, Chicago, 86-PVP-2.
63. Hofmann PJ, Steininger DA, and Schettler T (1992), PWR steam generator tube fretting and fatigue wear phenomena and correlations ASME HTD-Vol 230. Symp on Flow-Induced Vibration and Noise.
64. Hofmann, P.J., Friedrich, B.-C., and Schroder, H.J (1996), Prediction of PWR Steam Generator Tube Material Loss Caused by Perpendicular Impacting, ASME Publ, PVP-Vol 328,219-231.
65. Hogmark S, Oberg A, and Stridh B (1985), Wear of heat exchanger tubes, Proc oftheJSLE Int Trib Conf, Tokyo, Japan, 723-728.
66. Holm R (1946), Electrical Contacts, Almquist and Wiksells, Stockholm, Section 40.
67. Hong H, Hoghman RF, and Quinn TFJ (1988), New approach to the oxi-dational theory of mild wear, Trans STLE 31(1), 71-75.
68. Hsu KL, Ahn, TM, and Rigney DA (1980), Friction, wear and microstructure of unlubricated austenitic stainless steels, Wear 60(1), 13-37.
69. Hutchings IM (1992), Tribology: Friction and Wear of Engineering Materials, Edward Arnold, London.
70. Iyer SS and Ko PL (1996), Finite Element Modelling of Plastic Deformation, Crack Growth and Wear Particle Formation for Sliding Wear of Power Plant Components, ASME Publ, PVP-Vol 328, Flow-Induced Vibration-1996, 369-377.
71. Jain VK and Bahadur S (1980), Development of a wear equation for polymer-metal sliding in terms of the fatigue and topography of the sliding surfaces, Wear 60, 237-248.
72. Jain VK and Bahadur S (1982), Experimental verification of a fatigue wear equation, Wear 79(2) 241-253.
73. Jiang Jiaren, Stott FH, and Stack MM (1995), Mathematical model for sliding wear of metals at elevated temperatures, Wear 181-183, 20-31.
74. Johnson KL (1986), Plastic Flow, Residual Stress and Shakedown in Rolling Contact, Proc, Int Symp on Contact Mechanics and Wear of Rail-Wheel Systems, Kingston, Rhode Island.
75. Johnson KL (1995), Contact mechanics and the wear of metals, Wear 190, 162-170.
76. Kapoor A and Johnson KL (1994), Plastic ratcheting as a mechanism of metallic wear, Proc Royal Soc, London A445, 367-381.
77. Kato K (1989), Basic Studies of micro-mechanisms in wear, in-situ SEM observations, Proc of Int Conf on Wear of Materials, Denver, Colorado.
78. Keer LM, Xu Y, Cheng HS, and Xuan JL (1993), Simulation of wear particle creation in asperity contacts using the finite element method proceedings of STLE, Trib Trans 36(4) 613-620.
79. Kimura Y (1981), Role of fatigue in sliding wear, ASM Publ Fundamentals of Friction and Wear of Materials, DA Rigney (ed), 187-220.
80. Kimura Y and Shima M (1991), Longitudinal contact-point medel for calculating stress-intensity factors at surface cracks in sliding wear, Wear 141(2) 335-347.
81. Ko PL (1979), Experimental studies of tube fretting in steam generators and heat exchangers, JPressure Vessel Tech 101(2) 125-133.
82. Ko PL (1980), Fretting wear studies of heat exchanger tubes ASME Special Publ HTD-Vol 9, Flow-Induced Heat Exchanger Tube Vibration-1980, Chicago, 11-18.
83. Ko PL and Rogers RJ (1981), Analytical and experimental studies of tubesupport interaction in multi-span heat exchanger tubes, Nucl Eng Des 65(3) 399-409.
84. Ko, P.L., Tromp, J.H, and Weckwerth, M.K (1981), Heat exchanger tube fretting wear: Correlation of tube motion and wear, ASTM Special Publ, STP 780, Symp on Materials Evaluation Under Fretting Conditions, 86-105.
85. Ko PL (1984), Computer-aided tube fretting-wear predictions, Atomic Energy of Canada Limited report AECL-8350.
86. Ko PL and Basista H (1984), Correlation of support impact force and fretting-wear for a heat exchanger tube, Trans ASME, J of Pressure Vessel Tech 106(1), 69-77.
87. Ko PL (1985), Heat exchanger tube fretting wear: Review and application to design,-/Trib 107(2) 149-156.
88. Ko PL (1985), Significance of shear and normal force components on tube wear due to fretting and periodic impacting, Wear 106(1-3) 261-281.
89. Ko PL (1987), Metallic wear - A review, with special reference to vibration-induced wear in power plant components, Trib 20(2), 66-78.
90. Ko PL and Magel E (1989), Impact and Sliding Wear in Steam Generators and Heat Exchangers: New experimental test rig and wear model, ASME Publ, PVP-Vol 154, Flow-induced vibration-1989, ASME PVP Conference, Honolulu, 63-69.
91. Ko PL and Robertson MF (1989), Impact-sliding wear in metal-to-metal contacts, Proc Eurotrib-89, Helsinki, Finland, Vol 4, 174-179.
92. Ko PL, Robertson MF, and Magel EE (1991), Wear particle formation in lubricated sliding between hardened sphere and a flat surface, Proc 18th Leeds-Lyon Symp on Tribology, Lyon, France.
93. Ko PL (1993), Wear due to flow-induced vibration Chapter 8, Technology for the ‘90s, Au-Yang MK (ed), ASME Special Publ #100347, 865-896.
94. Ko PL, Knowles G, and Vaughan H (1995), Friction characteristics and the wear process of metal pairs in uni-directional sliding, Proc Int Tribology Conf Yokohama.
95. Ko PL, Taponat M-C, and Zbinden M (1995)Wear studies of materials for tubes and anti-vibration bars in nuclear steam generators, ASME Publ, PVP-Vol 298, Flow-Induced Vibration-1995, 99-110, also, J Pressure Vessel Tech, ?(?), 1996, pp.
96. Ko PL, Taponat M-C, Zbinden M, and Robertson MF (1996), Friction and wear studies of nuclear power plant components in pressurized high temperature water environments -1, ASME Publ, PVP-V ol 328, Flow-induced vibration-1996, 211-218.
97. Kopalinsky EM and Oxley PLB (1995), Investigation of the deformation and damage sustained by a wearing surface in sliding metallic friction, JTrib 117, 315-320.
98. Kragelsky IV (1962), Friction and Wear in Machines, Mashgiz Press, Moscow.
99. Kragelsky IV, Dobychin MN, and Kombalov VS (1982), Friction and Wear - Calculation Methods, Pergamon Press Ltd, Oxford, UK.
100. Kragelsky IV, Zolotar AI, and Sheiwekhman AO (1985), Theory of Material Wear by Solid Particle Impact - A Review, Trib Int 18(1), 3-11.
101. Krenz FH, Crawford CA, and Anderson PB (1960), Preliminary measurements with an apparatus for studying the fretting corrosion of zircaloy-2, Atomic Energy of Canada Ltd Report AECL-1217.
102. Kucharski S, Klimczak T, Polijaniuk A, and Kaczmarek J (1994), Finite-elements model for the contact of rough surfaces, Wear 177, 1-13.
103. Langford PJ and Connors HJ (1991), Calculation of Tube-AVB Wear from U-Bend Shaker Test Data, Proc IMechE Conf on Flow-Induced Vibrations, Brighton UK, Paper C416/040, 45-55.
104. Levy G and Morri J (1985), Impact wear in Co,-based environments, Wear 106, 97-138.
105. Lewis MWJ and Campbell GS (1980), Fretting and Wear of Stainless and Ferrite Steels in LMFBR Steam Generators, Int Conf on Materials Performance in Nuclear Steam Generators, St Petersburg, Florida.
106. Lim SC and Ashby MF (1987), Wear-mechanism maps, Acta Metall 35(1), 1-24.
107. Lin Ji-Yi and Cheng HS (1989), Analytical model for dynamic wear, J Trib 111(3)468-474.
108. Magel EE, Ko PL, and Johnson KL (1990), Application of shakedown theory to contact deformation and wear modelling, Proc CSME Mechanical Engineering Forum, Toronto, Ontario, Vol 2, 117-122.
109. Magel EE (1990), Experimental and theoretical studies of the wear of heat exchanger tubes, MA Sc thesis, Dept of Mech Eng, UBC.
110. McDowell JR (1960), Fretting of Zircaloy-2 in Hot Water, Final Progress Report, Westinghouse Res Lab 405FF348-R2.
111. McFarlane JS and Tabor D (1950), Relation between friction and adhesion, Proc R Soc London 202A, 244-255.
112. Meng HC and Ludema KC (1995), Wear models and predictive equations: Their form and content, Wear 181-183, 443-457.
113. Meng HC and Ludema KC Metal Handbook, Vol I: Properties and Selection of Metals, ASM 1961.
114. Moore MA (1980), Abrasive wear, ASM Materials Science Seminar on Fundamentals of Friction and Wear of Materials, Pittsburgh PA, Oct, 73-118.
115. Morri JR (1987), Synergism of impact wear and oxidation in carbon dioxide environments, Proc of IMechE Int Conf: Tribology-50 Years, Paper Cl50/87, 329-337.
116. Nakamura T and Fujita K (1987), Study on impact vibration of loosely held tube by cross flow, Proc Int Conf on Flow Induced Vibrations, Bowness-on-Windermere, England, Paper Kl, 427-436.
117. OECD, Glossary of terms and definitions in the field of friction, wear and lubrication - Tribology, Paris, 1964, 14.
118. Ohame N and Tsukizoe T (1980), Analysis of a wear process using the finite element method, Wear 61(2), 333-339.
119. Peterson MB (1980), Classification of Wear Processes, in Wear Control Handbook, ed., Peterson MB and Winer WO (eds), ASME Publ.
120. Petiot C, Vincent L, Dang Van K, Maouche N, Foulquier J, and Joumet B (1995), Analysis of fretting-fatigue failure combined with numerical calculations to predict crack nucleation, Wear, 181-183, 101-111.
121. Pettigrew MJ (ed) (1996), Flow-Induced Vibration - 1996, Excitation Mechanisms in Cross Flow and Nuclear Fuel Vibration; Fretting-Wear Damage and Piping Vibration, ASME PVP-V ol 328.
122. Phalippou C and Delaune T (1996), Predictive analysis of wear work rates in wear test rigs, ASME Publ, PVP-Vol 328, 247-256.
123. Qiu Xiangiun and Plesha ME (1991), Theory of dry wear based on energy, J Trib 113(3) 442-451.
124. Quinn TFJ and Sullivan JL (1977), Review of Oxidational Wear, Proc Int Conf on Wear of Materials, ASME, 110-115.
125. Quinn TFJ (1983), Review of oxidational wear - Part II, Trib Int 16(6) 306-315.
126. Rabinowicz E (1965), Friction and Wear of Materials, John Wiley and Sons, New York.
127. Rao MSM, Gupta GD, Eisinger FL, Hibbitt HD, and Steininger DA (1987), Computer Modelling of Vibration and Wear Multispan Tubes with Clearances at Tube Supports, Proc of IMechE Confon Flow Induced Vibrations, Bowness-on-Windermere, England, 449-466.
128. Rice SL (1978), Review of wear mechanisms and related topics, Proc Int Confon Fundamentals of Tribology, Sull NP and Saka N (eds), MIT, 401-441.
129. Rice SL (1979), Role of microstructure in the impact wear of two aluminum alloys, Wear 54(2), 291-301.
130. Rodkiewicz CM and Wang Y (1994), Dry wear model based on energy considerations, Trib Int 27(3), 145-151.
131. Rogers RJ and Pick RJ (1977), Factors associated with support plate forces due to heat exchanger tube vibratory contact, Nucl Eng and Des 44(2), 247-253.
132. Rogers RJ, Han Y, and Lu Y (1994), Heat exchanger squeeze film forces for tri-lobe broached hole supports, Proc of the 12th Symp on Engineering Applications of Mechanics - Interaction of Fluids, Structures and Mechanisms, 93-102.
133. Rosenfield AR (1981), Wear and Fatigue in Sliding Wear, ASM publication Fundamentals of Friction and Wear of Materials, Rigney DA (ed), 221-234.
134. Salesky WJ, Fisher RM, Ritchie RO, and Thomas G (1983), Nature and origin of sliding wear debris from steels, ASME Int Conf on Wear of Materials, 434-445.
135. Sauvé RG and Teper WW (1983), NonLinear dynamic - Impact simulation of process equipment tubes with tube-support plate interaction, Trans 7th Int Conf on Structural Mechanics in Reactor Technology, Vol B 269-278.
136. Sauvé RG and Teper WW (1987), Impact simulation of process equipment tubes and support plates - a numerical algorithm, Trans ASME J of Pressure Vessel Tech 109, 70-79.
137. Schumacher W (1977), Wear compatibility of unlubricated stainless steel and other metal couples, Proc Int Conf on Wear of Materials, St Louis, 134-139.
138. Schumacher W (1983), Effect of nitrogen and nickel on the galling and wear of austenitic stainless steels, Proc Int Confon Wear of Materials, 460-464.
139. Shin YS, Sass DE, and Jendrzejczyk JA (1978), vibro-impact responses of a tube with tube-baffle interaction, ASME PVP Conference, Montreal, Paper 78-PVP-20.
140. Stuhmiller JH, Kan KK, and Steininger D (1984), FLEXI: A computer Program for Studying Contact-lmpact Forces on Tube Vibrations, ASME PVP Publ, Vol 82, PVP Conference, Texas, 279-291.
141. Tabor D (1995), Tribology - the last 25 years: A personal view, Trib Int 28(1), 7-10.
142. Tan X and Rogers RJ (1996), Dynamic friction modelling in heat exchanger tube systems, symposium on flow-induced vibrations, ASME PVP/ICPVT-8 Conference, Montreal. PVP Vol 328, 347-358.
143. Teh CH and Goyder HG (1991), Impact analysis of loosely supported heat exchanger tubes, Proc IMechE. 5 th Int Confon Flow Induced Vibrations, Brighton, U.K. Paper C416/063, pp 139-147.
144. Thomgren JT (1970), Predict exchanger tube damage, Hydrocarbon Processing, X, 129-131.
145. Torrance AA and Zhou F (1993), fracture modes in wear particle formation, Proc 20th Leeds-Lyon Symp on Tribology, Sept, Lyon, France
146. Vincent L, Berthier Y, and Godet M (1992), Testing methods in fretting fatigue: a critical appraisal, standardization of fretting fatigue test methods and equipment, ASTM STP 1159, 33-48.
147. Vingsbo O and Hogmark S (1980), Wear of Steels, ASM Materials Science Seminar on Fundamentals of Friction and Wear of Materials, Pittsburgh, PA, 373-408.
148. Vingsbo O and Soderburg S (1987), Fretting Maps, Proc Int Conf on Wear of Materials, 885-894.
149. Waisman R and Frick TM (1989), Methodologies for the computation of steam generator tube wear with applications for turbulence in the u-bend region, Joint ASCE/ASME Mechanics, Fluids Engineering, and Biomechanics Conf, San Diago, California, Paper 89-FE-I5.
150. Waterhouse R (1972), Fretting Corrosion, Pergamon Press, Oxford.
151. Watson RD (1966), Wear and corrosion of wear, Atomic Energy of Canada Limited Report AECL-2566.
152. Wear 125(1, 2) (1988), Special Edition with papers dedicated Waterhouse’s retirement.
153. Weaver DS and Schneider W (1983), Effect of flat bar supports on the crossflow induced response of heat exchanger u-tubes, Trans ASME J of Eng for Power 105, 755-781.
154. Wear Control Handbook (1980), ASME.
155. Williams JA (1994), Engineering Tribology Oxford Science Publications, Oxford University Press.
156. Yang ZY, Naylor MGS, and Rigney DA (1985), Sliding Wear of 304 and 310 Stainless Steels, Wear 105(1), 73-86.
157. Yetisir M and Fisher NJ (1996), Fretting-wear prediction in steam generator tubes: Modelling ill-defined support conditions, ASME Publ, PVP-Mol 328, 359-368.
158. Zbinden M and Durbec V (1996), Kinetic model for impact-sliding wear of pressurized water reactor internal components - Application to rod cluster control assemblies ASME Publ Flow-Induced Vibration-1996, PVP-Vol 328, 379-395.
159. Zhou RS, Cheng HS, and Mura T (1989), Micropitting in rolling and sliding contact under mixed lubrication, Trans ASME J of Trib 111(4), 605-613.
160. Zhou T and Rogers R J (1996), Simulation of two-dimensional squeeze film and solid contact forces acting on a heat exchanger tube, Symposium on Flow-induced Vibrations - ASME Publication, PVP Vol 328, Flow-Induced Vibration-1996, 257-270.