Sandwich structures

Applied Mechanics Reviews

Volumn 54, Issue 3, 2001, Pages 201-214

  Vinson, Jack R ^a  

^a University of Delaware   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001559238     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3097295     Document Type: Article

References (174)

1. Noor AK, Burton WS, and Bert CW (1996) Computational Models for Sandwich Panels and Shells ApplMech Rev, 49(3) 155-199.
2. Fairbaim W (1849) An Account of the Construction of the Brittania and Conway Tubular Bridges, John Weale, London.
3. Feichtinger KA (1988) Test methods and performance of structural core materials-1. Static properties, 4a ASM hit Engineering Society of Detroit Advanced Composites Conf and Exposition, Sept.
4. Rheinfrank QB and Norman WA (1944) Molded glass fiber sandwich fuselage for the BT-15 Airplane, Army Air Corps Tech Report No 5159, Nov 8.
5. Marguerre K (1944) The optimum buckling load of a flexibly supported plate composed of two sheets joined by a light weight filler when under longitudinal compression, Deutsche Viertaljahrsschrift fur Literaturwis-senschaft und Giests Geschichte.DVL (ZWB UM1360/2), Oct 28.
6. Hoff NJ (1950) Bending and buckling of rectangular sandwich plates, NACA Tech Note 2225, Nov.
7. Libove C and Batdorf SB (1948) A general small deflection theory for sandwich plates, NACA Report 899, Washington DC.
8. Fliigge W (1949) Determination of optimum dimensions of sandwich panels. La Recherche Aeronautique, No 7, Jan/Feb.
9. Fliigge W (1952) The optimum problem of the sandwich plate, J Appl Mech 19(1) 104-108.
10. Bijlaard PP (1951, 1952) Analysis of elastic and plastic stability of sandwich plates by the method of split rigidities, J Aeronaut Sci 1-3.
11. Bijlaard PP (1952) On the optimum distribution of material in sandwich plates loaded in their plane, Proc of 1st US Congress of Appl Mech, ASME, New York, 373-380.
12. Eringen AC (1952) Bending and buckling of rectangular sandwich plates, Proc of 1st US Congress of Appl Mech, ASME, New York, 381-390.
13. March HW (1952) Behavior of a rectangular sandwich panel under uniform lateral load and a compressive edge load, Forest Products Lab Report 1834, Sept.
14. Ericksen W S (1955) Effects of shear deformation in the core of a flat rectangular sandwich panel: 1, Buckling under compressive end load; 2, Deflection under uniform transverse load, Forest Products Lab Report 1583, Aug.
15. Raville, ME (1955) Deflection and stresses in a uniformly loaded simply supported, rectangular sandwich plate, Forest Products Lab Report 1847.
16. Anon (1955) Materials, properties and design criteria, Part II, Sandwich construction for Aircraft Military Handbook 23 (ANC 23), Dept of the Air Force Research and Development Command, Dept of the Navy, Bureau of Aeronautics, Dept of Commerce, and the Civil Aeronautics Administration, Second Edition.
17. Gerard G (1956) Minimum Weight Analysis of Compressive Structures New York Univ Press, New York.
18. Kaechele LE (1957) Minimum weight design of sandwich panels, USAF Project Rand Research Memorandum, RM 1895, AD-133011, March.
19. Cheng S (1962) On the theory of bending of sandwich plates, Proc of 4th US Natl Congress of Applied Mechanics, ASME, New York
20. Heath WG (1960) Sandwich construction, Part 1: The strength of flat sandwich panels, Aircraft Eng 32 186-191
21. Heath WG (1960) Sandwich construction, Part 2: The optimum design of flat sandwich panels, Aircraft Eng 32 230-235.
22. Plantema FJ (1966) Sandwich Construction: The Bending and Buckling of Sandwich Beams, Plates and Shells, John Wiley and Sons, New York.
23. Allen HG (1969) Analysis and Design of Structural Sandwich Panels Pergamon Press, Oxford.
24. Vinson JR and Shore S (1965) Bibliography on methods of structural optimization for flat sandwich panels, Naval Air Engineering Center Report NAEC-ASC-1082, April 15.
25. Vinson JR and Shore S (1965) Methods of structural optimization for flat sandwich panels, Naval Air Engineering Center Report NAEC-ASC-1083, April 15.
26. Vinson JR and Shore S (1965) Design procedures for the structural optimization of flat sandwich panels, Naval Air Engineering Center Report NAEC-ASC-1084, April 15.
27. Vinson JR and Shore S (1967) Structural optimization of corrugated and web core sandwich panels subjected to uniaxial compression, Naval Air Engineering Center Report NAEC-ASC 1109, May.
28. Vinson JR and Shore S (1967) Structural optimization of flat corrugated core sandwich panels under in-plane shear loads and combined uniaxial compression and in-plane shear loads, Naval Air Engineering Center Report NAEC-ASC-1110, July.
29. McCoy TT, Vinson JR, and Shore S (1967) A method for weight optimization of flat truss core sandwich panels under lateral loads, Naval Air Engineering Center Report NAEC-ASC. 1111, July 1.
30. Hoff NJ (1986) Sandwich and Composite Aerospace Structures Tech-nomic Publ, Lancaster PA.
31. Ha KH (1989) Finite element and sandwich construction: A critical review, Sandwich Constructions 1, Proc of 1st Int Conf on Sandwich Constructions, K-A Olsson and RP Reichard (eds), EMAS Publ, UK, 69-84
32. Bert CW (1991) Research on dynamic behavior of composite and sandwich plates - V: Part I, Shock and Vibration Digest 23(6) 3-14; Part II, 23(7) 19-21.
33. Zenkert D (1995) An Introduction to Sandwich Construction, EMAS Publ, W Midlands, UK
34. Vinson JR (1999) The Behavior of Sandwich Structures of Isotropic and Composite Materials, Technomic Publ, Lancaster PA.
35. Olsson K-A and Reichard RP (eds) (1989) Sandwich Constructions I, Proc of 1st Int Conf on Sandwich Constructions, Stockholm, Sweden, June, EMAS Publ, UK.
36. Weissman-Berman D and Olsson K-A (eds) (1992) Sandwich Constructions 2, Proc of 2nd Int Conf on Sandwich Constructions, Gainesville FL, March, TwoVolumes, EMAS Publ, UK.
37. Allen HG (ed) (1996) Sandwich Constructions 3, Proc of 3rd Int Conf on Sandwich Constructions Southampton, UK, EMAS Publ, UK.
38. Olsson K-A (ed) (1998) Sandwich Constructions 4, Proc of 4th Int Conf on Sandwich Constructions, Stockholm, Sweden
39. Bitzer TN (1998) Recent honeycomb core developments, Sandwich Constructions 4, Proc of 4th Int Conf on Sandwich Constructions, K-A Olsson (ed), 555-563.
40. Lonno A and Hellbratt S-E (1996) Use of carbon fibre in a 63M high speed vessel, YS2000, for the Swedish Navy Sandwich Constructions-3, EMAS Publ, UK, 3-13.
41. Robson BL. (1989) The Royal Australian NAVY Inshore Minehunter -Lessons learned, Proc of 1st Int Conf on Sandwich Constructions, EMAS Ltd, Solihull, 395-423
42. Kimpara I, Kageyama K, Suzuki T, Ohsawa I, and Takatoya T (1989) Design and evaluation of advanced composite honeycomb sandwich structures for marine uses, EMAS Ltd, Solihull, 37-46
43. Starlinger A and Reif G (1989) Sandwich design of lightweight bus structures-engineering and cost saving aspects EMAS Ltd, Solihull, 103-115
44. Kujala K and Tuhkari J (1989) All-steel corrugated-core sandwich panels for ship structures, EMAS, Ltd, Solihull, 411-422
45. Karbhari VM (1997) Application of composite materials to the renewal of twenty first century infrastructure, Proc of II th Int Conf of Composite Materials, July, Austral Composite Structures Soc, RMIT, Melbourne.
46. Eckel II DA, (2000) An all fiber-reinforced-polymer-composite bridge: Design, analysis, fabrication, full-scale experimental structural validation, construction and erection, PhD Dissertation, Civil Eng, Univ of Delaware.
47. Davies JM (1977) Design criteria for sandwich panels for building construction, Proc of ASME Aerospace Division, Structures and Materials Committee, ASME-AD-Vol 55, New York, 273-284.
48. Woldesenbet E and Vinson JR (1995) Sandwich composite structures for low-cost and emergency housing, Proc of Int Conf on Sandwich Constructions-!, HG Allen (ed), Southampton, 61-70.
49. Halpin JC and Tsai SW (1967) Environmental factors in composite materials design, Air Force Materials Lab Tech Report 67-423.
50. Hashin Z (1972) Theory of fiber reinforced materials, NASA Contractor’s Report 1974.
51. Christensen RM (1979) Mechanics of Composite Materials John Wiley and Sons, New York.
52. Hahn HT (1980) Simplified formulas for elastic moduli of unidirectional continuous fiber composites, Composite Technology Review 2(3) 5-7.
53. Christensen RM and Kim B (1999) Properties of core materials for sandwich structures, Extended Abstracts from 12th Int Conf on Composite Materials, T Massard and A Vautrin (eds), 195.
54. Czaplicki RM (1992) Cellular core structures providing grid-like bearing surfaces on opposing parallel planes of the core, Proc of 2nd Int Conf on Sandwich Construction, D Weissman-Berman and K-A Olsson (eds), EMAS Publ, UK, 721-736.
55. Tuan CY. and Sierakowski RL (2000) Numerical analysis of a novel thermoplastic sandwich core, Material J Sandwich Struct Mat, 2, July, 215-224.
56. Hasebe SR and Sun CT (2000) Performance of sandwich structures with composite reinforced core, J Sandwich Struct Mat 2, Jan, 75-100.
57. Weitsman YJ (2000) Effects of fluids on polymeric composites-a review, Comprehensive Composite Materials, A Kelly and C Zweben (Eds-in-Chief), Vol 2, Polymeric Matrix Composites, R Talreja and AE Manson (eds), Ch 11, Elsevier Publ, 369-401.
58. Noor AK, Starnes JH, Jr., and Peters JM (1997) Curved sandwich panels subjected to temperature gradient and mechanical loads J Aerospace Div ASCE 10(4) 143-161.
59. Noor AK., Starnes Jr. JH, and Peters JM (2000) Recent advances and future trends in composite materials and structures, Comput Methods Appl Mech Eng 185(2-4) 413-432.
60. Jurf RA and Vinson JR (1985) Effect of moisture on the static and viscoelastic shear properties of epoxy adhesives, JMatSci 20,2979-2989.
61. Chevalier JL (1992) Creep and fatigue properties of end-grain balsa and other typical sandwich cores, Sandwich Constructions 2, EMAS Publ, UK, 519-539.
62. Gellhom Ev and Starlinger A (1992) An efficient extender procedure for creep parameters of structural foams, Sandwich Constructions 2, EMAS Publ, UK, 779-788.
63. Shenoi RA., Clark SD., Allen HG, and Hicks IA (1996) Steady state creep behavior of FRP foam cored sandwich beams, Sandwich Constructions 3, EMAS Publ, UK, 789-799.
64. Feichtinger KA and Martensen S (1996) A comparison of the creep behavior of aluminum and nomex honeycombs, PVC and balsa, Sandwich Constructions 2, EMAS Publ, UK, 801-802.
65. Caprino G., Teti R, and Messa M (1996) Long term behavior of PVC foam cores for structural sandwich constructions. Sandwich Constructions 2, EMAS Publ, UK, 813-824.
66. Lindholm VS (1964) Some experiments with the split hopkinson pressure bar. JMech Phys Solids, 12, 813-824.
67. Daniel IM, La Bedz RH, and Liber T (1981) New method for testing composites at very high strain rates, Exp Mech, Feb, 71-72.
68. Nicholas T (1981) Tensile testing of materials at high rates of strain, Exp Mech, May, 177-185.
69. Zukas JA (1982) Impact Dynamics John Wiley and Sons, New York.
70. Sierakowski RL.and Chaturvedi SK (1997) Dynamic Loading and Characterization of Fiber Reinforced Composites, Wiley Interscience.
71. Siersakowski RL (1997) Strain rate effects in composites Appl Mech Rev 50(12, Pt 1)741-761.
72. Feichtinger KA (1990) Test methods and performance of structural core materials-IIA Strain rate dependence of shear properties 5th Autumn INERN Conf, Composite Materials and Sandwich Structures, Lorient, Oct.
73. Gellhom Ev and Reif G (1992) Think dynamic-dynamic test data for the design of dynamically loaded structures, Sandwich Constructions-2, EMAS Publ, UK, 541-557.
74. Powers BM, Vinson JR, Hall IW and Hubbard RF (1997) High strain rate properties of cycom 5920/1582 cloth glass/epoxy composites, AIAA J 35(3) 553-556
75. Woldesenbet E and Vinson JR (1999) Specimen geometry effects on high strain rate testing of graphite/epoxy composites AIAA J 37(9) 1102-1106.
76. Frostig Y (1992) Behavior of delaminated sandwich beams with transversely flexible core - high order theory, Composite Struct 20,1-16
77. Frostig Y (1993) Higher order behavior of sandwich beams with flexible core and transverse diaphragms, JASCE Eng Mech Div 119(5) 955-972.
78. Frostig Y (1993) On stress concentrations in the bending of sandwich beams with transversely flexible core, Composite Struct 24,161-169.
79. Frostig Y (1997) Hygrothermal (environmental) effects in high-order bending of sandwich beams with a flexible core and a discontinuous skin Composite Struct 37(2) 205-221.
80. Frostig Y and Baruch M (1990) Bending of sandwich beams with transversely flexible core, AIAA.728(11) 523-531.
81. Frostig Y and Baruch M (1993) High-order buckling analysis of sandwich beams with transversely flexible core, J ASCE Eng Mech Div 119(3) 476-495.
82. Frostig Y and Baruch M (1994) Free vibrations of sandwich beams with a transversely flexible core: A high order approach, J Sound Vib 176(2) 195-208.
83. Frostig Y and Baruch M (1996) Localized load effects in high-order bending of sandwich panels with transversely flexible core, J ASCE Eng Mech Div 122(11).
84. Frostig Y (1999) Bending of curved sandwich panels with transversely flexible core-closed form high-order theory, J Sandwich Struct Mat 1, Jan, 4-41.
85. Thomsen OT and Frostig Y (1997) Localized bending effects in sandwich panels: photoelastic investigation vs high- order sandwich theory results, Composite Struct 37(1) 97-108.
86. Thomsen OT and Vinson JR (2000) Design study of a non-circular pressurized sandwich fuselage section using a high-order sandwich theory formulation, Proc of 5th Int Conf on Sandwich Constructions, Zurich, September, EMAS Publ, Ltd, UK.
87. Sikarskie D and Mercado M (1997) Analysis and design issues for modem aerospace vehicles, Proc of 1997 ASME IMECE, Aerospace Div, Vol AD-55, 365-377.
88. Frostig Y (1997) Bending of curved sandwich panels with transversely flexible cores-closed form high order theory, Proc of 1997 ASME IMECE, Aerospace Div, Vol AD-55, 335-354.
89. Frostig Y and Baruch M (1196) Localized load effects in higher order bending of sandwich panels with transversely flexible core J ASCE Eng Mech Div 122(11) 1069.
90. Patel D and Frostig Y (1995) High order bending of piecewise uniform sandwich beams with a tapered transition zone and a transversely flexible core, Composite Struct 31, 151-162.
91. Frostig Y and Shenhar I (1995) High-order bending of sandwich beams with a transversely flexible core and unsymmetrical composite skins Composites Eng 5(4) 405-414.
92. Thomsen OT and Frostig Y (1997) Localized bending effects in sandwich panels: Photoelastic investigation versus high-order sandwich theory results, Composite Struct 37(1) 97-108.
93. Swanson SR and Kim J (2000) Comparison of a higher order theory for sandwich beams with finite element and elasticity analyses, J Sandwich Struct Mat 2(1) 33-49.
94. Leibowitz M (1993) Studies on the use of piezoelectric actuators in composite sandwich constructions, PhD Dissertation, Mech Eng, Univ of Delaware.
95. Larson PH (1993) The use of piezoelectric materials in creating adaptive shell structures, PhD Dissertation, Mech Eng, Univ of Delaware.
96. Newill JF (1995) Composite sandwich structures incorporating piezoelectric materials, PhD Dissertation, Mech Eng, Univ of Delaware.
97. Yi S, Ling SF, Ying M, Hilton HH, and Vinson JR (1999) Finite element formulation for anisotropic coupled piezo-hygro-thermo-visco-elastodynamic problems, Int JNumer Methods Eng 45, 1531-1546.
98. Sun J-Q (1999) An impedance study of curved sandwich trim panels driven by piezoelectric patch actuators, J Sandwich Struct Mat 2, April, 128-146.
99. Vinson JR and Brull MA (1962) New techniques of solution for problems in the theory of orthotropic plates Proc of 4th US Natl Conf of Appl Mech, Vol 2, 817-825.
100. Daniel IM., Abot JL and Wang KA (1999) Testing and analysis of composite sandwich beams Extended Abstract Proc of 12th Int Conf on Composite Materials, EMAS Publ, UK, 197.
101. Kerr AD (1964) Elastic and viscoelastic foundation models, J Appl Mech 31, 491-498.
102. Timoshenko S and Woinowski-Krieger A (1959) Theory of Plates and Shells, 2nd Edition, McGraw-Hill Book Co, New York.
103. Vinson JR (1998) Minimum weight optimization of composite sandwich panels for lateral loading, ECCM-8 European Conf on Composite Materials-Science, Technologies and Applications, I Crivelli-Visconti (ed), Woodhouse Publ Limited, Vol 1, 583-590.
104. Vinson JR and Dee AT (1998) Use of asymmetric sandwich construction to minimize bending stresses, Proc of 4th Int Conf on Sandwich Constructions, Stockholm, June, Vol 1, EMAS Publ Ltd, UK, 391-402.
105. Dobyns AL (1981) The analysis of simply supported orthotropic plates subjected to static and dynamic loads, AIAA J, May, 642-650.
106. Pagano NJ (1970) Exact solutions for rectangular bi-directional composite and sandwich plates, J Composite Mat 4,20-34.
107. Warburton G (1968) The vibration of rectangular plates Proc of Inst of Mech Eng, Inst of Mech Eng, London, p 371.
108. Young D and Felgar Jr. RF (1949) Tables of characteristic functions representing normal modes of vibration for a beam, Univ of Texas Eng Research Series Report No 44, July 1.
109. Felgar Jr. RF (1950) Fonnulas for integrals containing characteristic functions of a vibrating beam, Univ of Texas Bureau of Eng Research Circular No 14.
110. Allen HG and Shenoi RA (1992) Flexural fatigue tests on sandwich structures, Sandwich Constructions 2, EMAS Publ, UK, 499-517.
111. Buene L, Echtenmeyer AT, Hayman B, and Engh B (1992) Shear properties of GRP sandwich beams subjected to slamming loads, Sandwich Constructions 2, EMAS Publ, UK, Til-756.
112. Gordaninejad F and Bert CW (1989) A new theory for bending of thick sandwich beams, Int J Mech Sci 31, 925-934.
113. Hyer MW, Anderson WJ, and Scott RA (1976, 1989) Non-linear vibrations of three-layer beams with viscoelastic cores Part 1-Theory, J Sound Vib, 46(1) 121-136; Part 2-Experiment, 61(1), 25-30.
114. Frostig Y, Baruch M, Vilnay O, and Sheinman I (1991) Sandwich beams with unsymmetrical skins and a flexible core-bending behavior, J of ASCE Eng Mech Div 117, 1931-1952.
115. Satapathy NR and Vinson JR (1999) Sandwich beams with mid-plane asymmetry subjected to lateral loads-analysis and optimization, Extended Abstract Proc of 12th Int Conf on Composite Materials EMAS Publ, UK, p.91.
116. Vinson JR and Sierakowski RL (1986) The Behavior of Structures Composed of Composite Materials Martinus-Nijhoff Publ (now Klu-wer Academic Publ), Dordrecht, 178-179.
117. Hong CS and Jeon JS (1992) An approximate solution for tapered sandwich plate with composite laminated faces, Sandwich Constructions 2, Vol 1, EMAS Publ, UK, 35-47.
118. Libove C and Lu CH (1989) Beam Type Bending of Variable Thickness Sandwich Plates AIAA J 27(4) 500-507.
119. Lu CH and Libove C (1991) Beam like harmonic vibration of variable thickness sandwich plates, AIAA J 29(2) 299.
120. Yu YY (1959) A new theory of elastic sandwich plates-one dimensional case. J Appl Mech 26,415-421.
121. Yu YY (1996) Vibrations of Elastic Plates: Linear and Nonlinear Dynamic Modeling of Sandwiches, Laminated Composites, and Piezoelectric Layers, Springer-Verlag, New York.
122. Yu YY (1997) Dynamics for large deflections of a sandwich plate with thin piezoelectric face layers ASME AD-Vol.55 Analysis and Design Issues for Modern Aerospace Vehicles, GJ Simitses (ed), 285-292.
123. Meyer-Piening H-R (1992) Nonlinear investigation of deflection, stress and frequencies of a rectangular thin sandwich plate, Sandwich Constructions 2, D Weissman-Berman and K-A Olsson, EMAS Publ, UK, 189-202.
124. Bau-Madsen NK, Svendsen K-H, and Kildegaard A (1992) Finite deformation of sandwich plates, Sandwich Constructions 2, D Weissman-Berman and K-A Olsson, EMAS Publ, UK, 401-415.
125. Ramachandra LS and Meyer-Piening H-R (1996) Dynamic analysis of sandwich structures in contact with water, Sandwich Constructions 3, HG Allen (ed), EMAS Publ, UK, 363-375.
126. Moyer Jr. ET, Amir GG, Olsson K-A, and Hellbratt SE (1992) Response of GRP sandwich structures subjected to shock loading Sandwich Constructions 2, D Weissman-Berman and K-A Olsson, EMAS Publ, UK, 49-65.
127. Williamson JE and Lagace PA (1993) Response mechanisms in the impact of graphite/epoxy honeycomb sandwich panels Proc of 8th Tech Conf of American Society for Composites, Technomic Publ, Lancaster PA, 287-297.
128. Ferri R and Sankar BV (1997) Static indentation and low velocity impact tests on sandwich plates, ASME Aerospace Div Publication AD-55, Analysis and Design Issues for Modem Aerospace Vehicles, 485-490.
129. Olsson K-A and Lonno A (1989) Test procedures for foam core materials, Proc of 1st Int Conf on Sandwich Constructions, K-A Olsson and RP Reinhard (eds), EMAS Ltd., Solihull, UK, 293-318.
130. Echtermeyer AT, Buene L, McGeorge D, and Sund OE (1991) Four point bend testing of GRP sandwich beams-Part 1. Det Norske Veritas VR-91-P0013.
131. Buene L, Echtermeyer AT, and Sund OE (1991) Fatigue properties of PVC foam core materials, Det Norske Veritas Report 91-2049.
132. Allen HG and Shenoi RA (1992) Flexural fatigue tests on sandwich structures, Proc of 2nd Int Conf on Sandwich Constructions, D Weissman-Berman and K-A Olsson (eds), EMAS Ltd, Solihull, UK.
133. Shenoi RA, Clark SD, and Allen HG (1995) Fatigue behavior of polymer composite sandwich beams J Composite Mat 29(18) 2423-2445.
134. Burman M and Zenkert D (1997) Fatigue of foam core sandwich beams, Part 1: Undamaged specimens, Int J Fatigue 19(7) 551-561.
135. Burman M and Zenkert D (1997) Fatigue of foam core sandwich beams, Part II: Effect of initial damages, Int J Fatigue 19(7) 563-578.
136. Burman M and Zenkert D (2000) Fatigue of undamaged and damaged honeycomb sandwich beams, J Sandwich Struct Mat 2, Jan, 50-74.
137. Thomsen OT (1992) Analysis of local bending effects in sandwich panels subjected to concentrated loads, Sandwich Constructions 2, D Weissman-Berman and K-A Olsson (eds), EMAS Publ, UK, 417-440.
138. Ericsson A and Sankar BV (1992) Contact stiffness of sandwich plates and applications to impact problems, Sandwich Constructions 2, D Weissman-Berman and K-A Olsson (eds), EMAS Publ, UK, 139-159.
139. Swanson SR (2000) Response of orthotropic sandwich plates to concentrated loads, J Sandwich Struct Mat 2, July, 270-287.
140. Nemes JA and Simmonds KE (1992) Low velocity impact of foam-core sandwich composites, J Composite Mat 26(4) 500-519.
141. Wu CL, Weeks CA, and Sun CT (1995) Improving honeycomb core sandwich structures for impact resistance, J Appl Mat, July, 41-47.
142. Wu CL and Sun CT (1996) Low-velocity impact damage in composite sandwich beams, Composite Struct 34, 21-27.
143. Wu Cl and Vinson JR (1971) Nonlinear oscillations of laminated specially orthotropic plates with clamped and simply supported edges J Acoust Soc Am 49(5) (Pt 2) 1561-1567.
144. Yu YY (1962) Nonlinear flexural vibrations of sandwich plates J Acoust Soc Am 34, p 1176.
145. Ray JD and Bert CW (1969) Nonlinear vibrations of a beam with pinned ends, J Eng Indust, 91B(4) 997-1004.
146. Nashif AD, Jones DIG, and Henderson JP (1985) Vibration Damping, Wiley Interscience, New York
147. Inman DJ (1989) Vibration and Control Measurement and Stability Prentice Hall, Englewood Cliffs NJ.
148. Thamburaj P and Sun J-Q (1999) Effect of material anisotropy on the sound and vibration transmission loss in sandwich aircraft structures J Sandwich Struct Mat 1, Jan, 76-92.
149. Bleich HH (1952) Buckling of Metal Structures McGraw-Hill Book Co, New York.
150. Timoshenko S and Gere J (1961) Theory of Elastic Stability, 2nd Edition, McGraw Hill Book Co, New York.
151. Brush DO and Almroth BO (1975) Buckling of Bars, Plates and Shells McGraw Hill Book Co, New York.
152. Simitses G J (1976) Introduction to Elastic Stability of Structures Prentice Hall, Englewood, NJ.
153. Heath WG (1960) Sandwich construction, Part 2: The optimum design of flat sandwich panels Aircraft Eng 32, Aug, 230-235.
154. Hoff NJ and Mautner E (1945) Buckling of sandwich type panels, J Aeronaut Sci 12(3) 285-297.
155. Smidt S (1996) Testing of curved sandwich panels and comparison with calculations based on the finite element method, Sandwich Constructions 3, HG Allen (ed), EMAS Publ, UK, 665-680.
156. Thomsen R S and Mouritz AP (1999) Skin wrinkling of impact damaged sandwich composites, J Sandwich Struct Mat, Vol 1, Oct, 299-322.
157. Libove C and Hubka RE (1951) Elastic constants for corrugated-core sandwich plates, NACA TN 2289.
158. Anderson MS (1959) Optimum proportions of truss core and web core sandwich plates loaded in compression. NASA TN D-98, Sept.
159. Seide P (1952) The stability under longitudinal compression of flat symmetric corrugated-core sandwich plates with simply supported loaded edges and simply supported or clamped unloaded edges, NACA TN 2679.
160. Aimmanee S and Vinson JR (2000) Analysis and optimization of foam reinforced web-core composite sandwich panels under in-plane compressive loads, Proc of 15 th Annual Tech Conf of American Society of Composites, Sept, Technomic Publ, Lancaster PA.
161. Librescu L, Hause T, and Camarda CJ (1997) Geometrically nonlinear theory of initially imperfect sandwich curved panels incorporating non-classical effects, AIAA J.35(8) 1393-1403.
162. Niu K and Talreja R (1999) Buckling of a thin face layer on winkler foundation with debonds, J Sandwich Struct Mat 1, Oct, 259-278.
163. Laine C and Rio G (1992) Buckling of sandwich panels used in shipbuilding: experimental and theoretical approach, Sandwich Constructions 2, D Weissman-Berman and K-A Olsson (eds), EMAS Publ, UK, 243-252.
164. Anon. (1968) Buckling of thin walled circular cylinders, NASA SP-8007 Revised, Aug.
165. Bert CW, Crisman WC, and Nordby GM (1969) Buckling of cylindrical and conical sandwich shells with orthotropic facings, AIAA J 7(2) 250-257.
166. Reese CD and Bert CW (1969) Simplified design equations for buckling of axially compressed sandwich cylinders with orthotropic facings and core, AIAA J Aircraft, Nov-Dec, 515-519.
167. Birman V and Simitses GJ (2000) Elliptical and circular cylindrical sandwich shells with different facings J Sandwich Struct Mat 2, Apr, 152-176.
168. Birman V and Simitses GJ (1998) Theory of box-type sandwich shells with dissimilar facings subjected to thermomechanical loads, AIAA J 38, 362-367.
169. Thomsen OT and Vinson JR (2000) Design study of a non-circular pressurized fuselage section using a high order sandwich theory formulation, Proc of 5 th Int Conf on Sandwich Constructions, Zurich, Sept.
170. Thomsen OT and Vinson JR (2000) Comparative study of two different conceptual design principles for non-circular pressurized fuselage sections using a high order sandwich theory, Proc of ASME-IMECE, Orlando, Nov.
171. Huyan X and Simitses GJ (1997) Dynamic buckling of imperfect cylindrical shells under axial compression and bending moment, AIAA J 35(8) 1404-1412.
172. Simitses GJ (1987) Instability of dynamically-loaded structures Appl Mech Rev 40(10) 1403-1408.
173. Simitses G J (1965) Dynamic snap-through buckling of low arches and shallow spherical caps, PhD Dissertation, Aeronautics and Astronautics, Stanford Univ, June.
174. Preissner EC and Vinson JR (1998) Circular cylindrical sandwich shells with mid-plane asymmetry subjected to axially symmetric loads ASME AD-Vol.56, Recent Advances in Mechanics of Aerospace Structures and Materials, BV Sankar (ed), 245-252.