Materials chemistry issues related to advanced materials applications in the automotive industry

Chemistry of Materials

Volumn 8, Issue 5, 1996, Pages 984-1003

  Narula, Chaitanya K ^a   Allison, John E ^a   Bauer, David R ^a   Gandhi, Haren S ^a  

^a FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001431033     PISSN: 08974756     EISSN: None     Source Type: Journal    
DOI: 10.1021/cm950588m     Document Type: Review

References (229)

1. Korcek, S.; Beardmore, P. In Proceedings of 6th International Congress of Tribology; Kozma, M., Ed.; 1993; Vol 1, p 44.
2. For example, incorporation of antilock brake system to improve the safety of the automobiles required modification of brake system and electronics.
3. Committee on Materials Science and Engineering for the 1990s; Maintaining Competitiveness in the Age of Materials; Chaudhari, P., Flemings, M. C., Cochairmen; National Academy Press: Washington, DC, 1989.
4. McLean, A. F. Ceramics for High-Performance Applications; Burke, J. J., Lenoe, E. N., Katz, R. N., Eds.; Brook Hill: Chestnut Hill, MA, 1978.
5. Dislich, H. In Sol-Gel Technology for Thin Films, Fibers, Preforms, Electronics, and Specialty Shapes; Klein, L. C., Ed.; Noyes; Park Ridge, NJ, 1988.
6. Post, R. F.; Fowler, K.; Post, S. F. Proc. IEEE 1993, 81, 462. Burke, A. F.; SAE International, 1991; p 367. Howard, P. F.; Grenhill, C. J. SAE 931817.
7. Westbrook, M. H.; Turner, J. D. Automotive Sensors; IOP Publishing: Philadephia, 1994. Logothetis, E. M. Automotive Oxygen Sensors; Chemical Sensor Technology, 3, Kodansha Ltd., 1991.
8. Westbrook, M. H.; Turner, J. D. Automotive Sensors; IOP Publishing: Philadephia, 1994. Logothetis, E. M. Automotive Oxygen Sensors; Chemical Sensor Technology, 3, Kodansha Ltd., 1991.
9. The higher cost of CVD is determined by considering this process as a system. Assuming that only one device per vehicle needs to be coated and taking into account only the number of cars sold in US (15 million per year), approximately 7200 devices need to finished per hour (based on 40 h work week with no shutdowns for 52 weeks). This would require simultaneous operation of a large number of CVD units operated by skilled workers. This makes CVD too expensive for coating large components.
10. Griffith, A. A. Philos. Trans. R. Soc. 1920, 221, 163.
11. Taguchi, M. Adv. Ceram. Mater. 1987, 2, 754
12. Greil, P.; Seibold, M. J. Mater. Sci. 1991, 27, 1053.
13. Greil, P.; Seibold, M.; Erny, T. Mater. Res. Soc. Symp. Proc. 1992, 274, 155. Reidel, R.; Passing, G; Schönfelder, Brook, R. J. Nature 1992, 355, 355.
14. Greil, P.; Seibold, M.; Erny, T. Mater. Res. Soc. Symp. Proc. 1992, 274, 155. Reidel, R.; Passing, G; Schönfelder, Brook, R. J. Nature 1992, 355, 355.
15. Greil, P. J. Am. Ceram. Soc. 1995, 78, 835.
16. Bryzik, W.; Kamo, R. SAE-830314, 1983.
17. Swain, M. V.; Hannink, R. H.; Garvie, R. C. Fracture Mechanics of Ceramics; Penn State University, 1981; Vols. 5 and 6.
18. EPRI Proceedings of the second conference on Advanced Materials for Alternative Fuel Capable Heat Engines, EPRI RD-2369-SR Proceedings, May 1982.
19. Timoney, S.; Flynn, G. SAE 830313, 1983.
20. Narula, C. K. Ceramic Precursor Technology and Its Applications; Marcel Dekker: 1995.
21. McLean, A. F.; Fisher, E. A.; Harrison, D. E. AMMRC CTR 72-3 [AD 894 052L], 1972. McLean, A. F.; Fisher, E. A.; Bratton, R. J. AMMRC CTR 72-19 [AD 905 043L], 1972. McLean, A. F.; Fisher, E. A.; Bratton, R. J. AMMRC CTR 73-9 [AD 910 446L], 1973.
22. McLean, A. F.; Fisher, E. A.; Harrison, D. E. AMMRC CTR 72-3 [AD 894 052L], 1972. McLean, A. F.; Fisher, E. A.; Bratton, R. J. AMMRC CTR 72-19 [AD 905 043L], 1972. McLean, A. F.; Fisher, E. A.; Bratton, R. J. AMMRC CTR 73-9 [AD 910 446L], 1973.
23. McLean, A. F.; Fisher, E. A.; Harrison, D. E. AMMRC CTR 72-3 [AD 894 052L], 1972. McLean, A. F.; Fisher, E. A.; Bratton, R. J. AMMRC CTR 72-19 [AD 905 043L], 1972. McLean, A. F.; Fisher, E. A.; Bratton, R. J. AMMRC CTR 73-9 [AD 910 446L], 1973.
24. Wild, S.; Grieveson, P.; Jack, K. H. Special Ceramics; Popper, P., Ed.; British Ceramic Research Association, 1972; Vol. 5, p 385.
25. Lange, F. F. J. Am. Ceram. Soc. 1973, 56, 518.
26. Lange, F. F. J. Am. Ceram. Soc. 1979, 62, 428.
27. Hampshire, S.; Park, H. K ; Thompson, D. P.; Jack, K. H. Nature 1978, 274, 880. Hwang, S -L.; Chen, I.-W. J. Am. Ceram. Soc. 1994, 77, 165.
28. Hampshire, S.; Park, H. K ; Thompson, D. P.; Jack, K. H. Nature 1978, 274, 880. Hwang, S -L.; Chen, I.-W. J. Am. Ceram. Soc. 1994, 77, 165.
29. Li, C. W.; Yamanis, J. Ceram. Eng. Sci. Proc. 1989, 10, 632. Tani, E.; Umebayashi, S.; Kishi, K.; Kobayashi, K.; Nishijima, M. Am. Ceram. Soc. Bull. 1986, 65, 1311.
30. Li, C. W.; Yamanis, J. Ceram. Eng. Sci. Proc. 1989, 10, 632. Tani, E.; Umebayashi, S.; Kishi, K.; Kobayashi, K.; Nishijima, M. Am. Ceram. Soc. Bull. 1986, 65, 1311.
31. Becher, P. F. J. Am. Ceram. Soc. 1991, 74, 428.
32. Becher, P. F. J. Am. Ceram. Soc. 1991, 74, 255.
33. Li, C. W.; Yamannis, J. Ceram. Eng. Sci. Proc. 1989, 10, 632. Kawashima, T.; Okamoto, H.; Yamamoto, H.; Kitamura, A. J. Ceram. Soc. Jpn. 1991, 99, 1.
34. Li, C. W.; Yamannis, J. Ceram. Eng. Sci. Proc. 1989, 10, 632. Kawashima, T.; Okamoto, H.; Yamamoto, H.; Kitamura, A. J. Ceram. Soc. Jpn. 1991, 99, 1.
35. He, M. Y.; Hutchinson, J. W. Int. J. Solids Struct. 1989, 25, 1053.
36. 4 Ceramics; Hoffmann, M. J., Petzow, G., Eds.; NATO ASI Series; Kluwer Academic Publisher; Dordrecht, 1994; p 101.
37. Messier, D. R.; Wong, P. Ceramics for High-Performance Applications; Burke, J. J., Gorum, A. E., Katz, R. N., Eds.; Brook Hill Publishing Co.: MA; p 181.
38. Evans, A. G; Davidge, R. W. J. Mater. Sci. 1970, 5, 314.
39. Godfrey, D. J.; Lindley, M. W. Proc. Brit. Ceram. Soc. 1973, 22, 229.
40. Brown, R. W.; Godfrey, D. J.; Lindley, M. W.; May, E. R. W. Special Ceramics; Popper, P., Ed.; British Ceramic Research Association: 1972; Vol. 5, p 345.
41. Mangeles, J. A. Ceramics for High-Performance Applications; Burke, J. J., Gorum, A. E., Katz, R. N., Eds.; Brook Hill Publishing Co.: MA, 1974; p 195.
42. Ezis, A. Ceramics for High-Performance Applications; Burke, J. J., Gorum, A. E., Katz, R. N., Eds.; Brook Hill Publishing Co.: MA, 1974; p 207.
43. Deeley, G. G.; Herbert, J. M.; Moore, N. C. Powder Met. 1961, 145.
44. Terwilliger, G. R.; Lange, F. F. J. Am. Ceram. Soc. 1974, 57, 25.
45. Wild, S.; Grieveson, P.; Jack, K. H.; Latimer, M. J. Special Ceramics; Popper, P., Ed.; British Ceramic Research Association: 1972; Vol. 5, p 377.
46. Kossowsky, R. J. Mater. Sci. 1973, 8, 1603.
47. Lange, F. F.; Iskoe, J. L. Ceramics for High-Performance Applications; Burke, J. J., Gorum, A. E., Katz, R. N., Eds.; Brook Hill Publishing Co.: MA, 1974; p 223.
48. Yajima, S.; Shishido, T.; Kayano, H.; Okamura, K.; Omori, M.; Hayashi, J. Nature 1976, 264, 239.
49. Luckacs, A. U.S. Patent 5,190,709, 1993.
50. Schwark, J. M. Polym. Prepr. 1991, 32, 567.
51. Schwark, J. M.; Luckacs, A. Inorganic and Organometallic Polymers II; ACS Symposium Series 572; American Chemical Society: Washington, DC, 1994; p 43.
52. Riedel, R.; Passing, G.; Schönfelder, Brook, R. J. Nature 1992, 355, 714
53. Whalen, T. J.; Baer, J. R. In Silicon Carbide '87; Cawley, J. D., Semler, C. E., Eds.; Ceramic Transactions; The American Ceramic Society, Inc.: Westerville, OH, 1989; Vol. 2, p 355.
54. McLarnan, T. J. Z. Krystallogr. 1981, 155, 269.
55. Gmelin Handbook of Inorganic Chemistry, 8th ed.; Si-silicon; Springer-Verlag: New York, 1984; supplement Vol. B2.
56. Shinozaki, S. S.; Hangas, J.; Maeda, K.; Soeta, S. In Silicon Carbide '87; Cawley, J. D., Semler, C. E., Eds.; Ceramic Transactions; The American Ceramic Society, Inc.: Westerville, OH, 1989; Vol. 2, p 113.
57. Suzuki, K.; Sasaki, M. Research Laboratory Reports; Asahi Glass Co., Ltd.: Japan, 1986.
58. Whalen, T. J.; Trela, W.; Shinozaki, S. S. U.S. Patent application in process.
59. Alliegro, R. A.; Coffin, L. B.; Tinklepauph, J. R. J. Am. Ceram. Soc. 1956, 39, 386. Lange, F. F J. Mater. Sci. 1975, 10, 314.
60. Alliegro, R. A.; Coffin, L. B.; Tinklepauph, J. R. J. Am. Ceram. Soc. 1956, 39, 386. Lange, F. F J. Mater. Sci. 1975, 10, 314.
61. Prochazka, S. In Special Cermaics; Popper, P., Ed.; Brit. Ceram. Res. Assoc.: 1975; p 171.
62. Mulla, M. A.; Krstic, V. D. Acta Metall. Mater. 1994, 42, 303. Padture, N. P. J. Am. Ceram. Soc. 1994, 77, 519.
63. Mulla, M. A.; Krstic, V. D. Acta Metall. Mater. 1994, 42, 303. Padture, N. P. J. Am. Ceram. Soc. 1994, 77, 519.
64. Whalen, T. J.; Winterbottom, W. L. NASA Contr. Rep. 179477, 1986, under Grant NAS3-24384.
65. Whalen, T. J. NASA Contr. Rep. 180831, 1987, under Grant NAS3-24384.
66. Laine, R M ; Babonneau, F. Chem. Mater. 1993, 5, 260.
67. Yajima, S.; Liaw, C.; Omori, M.; Hayashi, J. Chem. Lett. 1976, 435. Yajima, S.; Liaw, C.; Omori, M.; Hayashi, J. Chem. Lett. 1976, 551.
68. Yajima, S.; Liaw, C.; Omori, M.; Hayashi, J. Chem. Lett. 1976, 435. Yajima, S.; Liaw, C.; Omori, M.; Hayashi, J. Chem. Lett. 1976, 551.
69. Yajima, S.; Shishido, T.; Kayano, H.; Okamura, K.; Omori, M.; Hayashi, J. Nature 1976, 264, 238.
70. Semen, J.; Loop, J. G. Ceram. Eng. Sci. Proc. 1990, 11, 1287. Semen, J.; Loop, J. G. Ceram. Eng. Sci. Proc. 1991, 12, 1967.
71. Semen, J.; Loop, J. G. Ceram. Eng. Sci. Proc. 1990, 11, 1287. Semen, J.; Loop, J. G. Ceram. Eng. Sci. Proc. 1991, 12, 1967.
72. Kodama, H.; Miyoshi, T. Adv. Ceram. Mater. 1988, 3, 177.
73. Gardner, H. C.; Margolis, J. Section 2, pp 97-220, of Engineering Plastics; Vol. 2 of the Engineered Materials Handbook of ASM; ASM: Metals Park, OH, 1988.
74. Larramee, R. E. Section 2, p 439, of Engineering Plastics; Vol. 2 of the Engineered Materials Handbook of ASM; ASM: Metals Park, OH, 1988.
75. Shalaby, S. W.; May, P. Section 2, p 445, of Engineering Plastics; Vol. 2 of the Engineered Materials Handbook of ASM; ASM: Metals Park, OH, 1988.
76. Miller, D. M. In Composites; Vol. 1 of the Engineered Materials Handbook of ASM, Metals Park, OH, 1987; p 45.
77. McCluskey, J. J.; Doherty, F. W. Vol. 1 of the Engineered Materials Handbook of ASM, Metals Park, OH, 1987; p 157.
78. Hansen, N. W. Engineered Materials Handbook of ASM; ASM: Metals Park, OH, 1987; Vol. 1, p 112.
79. Murray, A.; Johnson, C. F. Engineered Materials Handbook of ASM; ASM: Metals Park, OH, 1987; Vol. 1, pp 555, 559, 565.
80. Ryntz, R. A. J. Coat. Technol., in press.
81. Beardmore, P.; Johnson, C. F. Composite Sci. Technol. 1986, 26, 251.
82. Millerschin, E. SMC Automotive Alliance News Release, 1995.
83. Lucas, K. A.; Clarke, H. Corrosion of Aluminum-Based Metal Matrix Composites; John Wiley & Sons Inc.: New York, 1993.
84. Boardman, B. SAE-Intemationals, SAE/SP-90-836, 1990.
85. Metal Matrix Composites; Myers, M. R., Ed.; SAE International, SAE-SP-94-1010, 1994.
86. Allison, J. E.; Cole, G. S. J. Met. 1993, 19.
87. Kozcak, M. J.; Khatri, S. C.; Allison, J. E.; Bader, M. In Fundamentals of Metal Matrix Composites; Suresh S., Mortensen, A., Needleman, A., Eds.; Butterworth-Heinemann Publishers: Stoneham, MA, 1993.
88. Feest, E. A. Metal Matrix Composites for Industrial Applications; Materials and Design: 1986; Vol. 7, p 58.
89. Hamajima, K.; Tanaka, A.; Sugunana, T. JSAE Rev. 1990, 11. Kubo, M.; Tanaka, A.; Kato, T. JSAE Rev. 1988, 9.
90. Hamajima, K.; Tanaka, A.; Sugunana, T. JSAE Rev. 1990, 11. Kubo, M.; Tanaka, A.; Kato, T. JSAE Rev. 1988, 9.
91. Hayashi, T.; Ushio, H.; Ebisawa, M. SAE-89-0557, 1889. Ebisawa, M.; Hara, T.; Hayashi, T.; Ushio, H. SAE-91-0835, 1991.
92. Hayashi, T.; Ushio, H.; Ebisawa, M. SAE-89-0557, 1889. Ebisawa, M.; Hara, T.; Hayashi, T.; Ushio, H. SAE-91-0835, 1991.
93. Skibo, M. D.; Schuster, D. M. U.S. Patent 4,786,467, 1988.
94. Urquhart, A. M. Adv. Mater. Processes 1991, 25. Lynch, C. T.; Kershaw, J. P. Metal Matrix Composites; CRC Press: Cleveland, OH, 1972.
95. Urquhart, A. M. Adv. Mater. Processes 1991, 25. Lynch, C. T.; Kershaw, J. P. Metal Matrix Composites; CRC Press: Cleveland, OH, 1972.
96. Hunt, W. H.; Cook, C. R., Sawtell, R. R. SAE 91-0834, 1991. Hamiuddin, M. Powder Metall. Inst. 1987, 19, 2.
97. Hunt, W. H.; Cook, C. R., Sawtell, R. R. SAE 91-0834, 1991. Hamiuddin, M. Powder Metall. Inst. 1987, 19, 2.
98. Mehrabian, R.; Rick, R. G.; Flemings, M. C. Met. Trans. 1974, 5, 1899.
99. White, J.; Hughes, I. R.; Willis, T. C.; Jordan, R. M. J. Phys. Colloq. C3-347, 1987.
100. King, J. E. Advanced Ceramic and Metallic Composites Course Lecture Notes; University of Cambridge: UK, 1990
101. Smithells, C. J. Metal Reference Book, 6th ed.; Brandes, E. A., Ed.; Butterworth: London, 1983; p 29. Shunk, F. A. Constitution of Binary Alloys, Second Supplement; McGraw-Hill: New York, 1986; p 16.
102. Smithells, C. J. Metal Reference Book, 6th ed.; Brandes, E. A., Ed.; Butterworth: London, 1983; p 29. Shunk, F. A. Constitution of Binary Alloys, Second Supplement; McGraw-Hill: New York, 1986; p 16.
103. Composite Casting Guidelines; Duralcan Composites: San Diego, 1990.
104. Nath, D.; Namboodhiri, T. K. G. Corros. Sci. 1989, 29, 1215.
105. Krishnan, B. P.; Surappa, M. K.; Rohtagi, P. K. J. Mater. Sci. 1981, 16, 1209.
106. Yajima, S.; Shishido, T.; Kayano, H. Nature 1976, 264, 237.
107. Seyferth, D.; Wood, T. G.; Tracy, H. J.; Robinson, J. L. J. Am. Ceram. Soc. 1992, 75, 1300.
108. Yajima, S. Am. Ceram. Soc. Bull 1983, 62, 893.
109. (a) Seyferth, D.; Wiseman, G. H. J. Am. Ceram. Soc. 1984, 67, C132.
110. (b) Seyferth, D.; Wiseman, G. H. U.S. Patent 4,482,669, 1984.
111. Seyferth, D.; Czubarow, P. Chem. Mater. 1994, 6, 10.
112. Narula, C. K.; Demczyk, B. G.; Czubarow, P.; Seyferth, D. J. Am. Ceram. Soc. 1995, 78, 1247.
113. Narula, C. K. U.S. Patent 5,087,593, 1992. Narula, C. K.; Crosbie, G. M. U.S. Patent 5,350,719, 1994. Narula, C. K. Mater. Res. Soc. Symp. 1992, 271, 881.
114. Narula, C. K. U.S. Patent 5,087,593, 1992. Narula, C. K.; Crosbie, G. M. U.S. Patent 5,350,719, 1994. Narula, C. K. Mater. Res. Soc. Symp. 1992, 271, 881.
115. Narula, C. K. U.S. Patent 5,087,593, 1992. Narula, C. K.; Crosbie, G. M. U.S. Patent 5,350,719, 1994. Narula, C. K. Mater. Res. Soc. Symp. 1992, 271, 881.
116. Narula, C. K.; Schaeffer, R. O.; Paine, R. T.; Datye, A.; Hammetter, W. F. J. Am. Chem. Soc. 1987, 109, 5556.
117. Narula, C. K.; Czubarow, P.; Seyferth, D. J. Mater. Sci., submitted.
118. Chang, T. Y.; Chock, D. P.; Hammerle, R. H.; Japar, S. M.; Salmeen, I. T. Crit. Rev. Environ. Control 1992, 22, 27.
119. Taylor, K. C. Automobile Catalytic Converters; Springer-Verlag: New York, 1984.
120. Church, M. L.; Cooper, B. J.; Wilson, P. J. SAE 890815, 1989.
121. Heck, R. M.; Farrauto, R. J. Catalytic Air Pollution Control. Commerical Technology; Van Nostrand Reinhold: New York, 1995.
122. Wang, T.; Soltis, R.; Logothetis, E.; Cok, J.; Hamburg, D. SAE 930352.
123. Wiedenmann, H.; Raff, L.; Noods, R. SAE 840141.
124. Harrison, B.; Diwell, A.; Hallett, C. Platinum Met. Rev. 1988, 32, 73. Fisher, G.; Theis, J.; Casarella, M.; Mahan, S. SAE 931034.
125. Harrison, B.; Diwell, A.; Hallett, C. Platinum Met. Rev. 1988, 32, 73. Fisher, G.; Theis, J.; Casarella, M.; Mahan, S. SAE 931034.
126. Engineered Materials Handbook, Vol. 4, Ceramics and Glasses; Volume Chairman Schneider, S. J., Jr.; ASM International. 1991.
127. Gandhi, H. S. Proc. Inst. Mech. Eng. 1988, 202 (D4), 227.
128. Burtin, P.; Brunelle, J. P.; Pijolat, M.; Soustelle, M. Appl. Catal. 1987, 34, 225. Church, J. S.; Cant, N. W.; Trimm, D. L. Appl Catal. 1993, 101, 105.
129. Burtin, P.; Brunelle, J. P.; Pijolat, M.; Soustelle, M. Appl. Catal. 1987, 34, 225. Church, J. S.; Cant, N. W.; Trimm, D. L. Appl Catal. 1993, 101, 105.
130. Schaper, H. E.; Doesburg, E. B. M.; van Reijen, L. L. Appl. Catal. 1983, 7, 211. Schaper, H. E ; Amesz, D. J.; Doesburg, E. B. M , van Reijen, L. L. Appl. Catal. 1984, 9, 129.
131. Schaper, H. E.; Doesburg, E. B. M.; van Reijen, L. L. Appl. Catal. 1983, 7, 211. Schaper, H. E ; Amesz, D. J.; Doesburg, E. B. M , van Reijen, L. L. Appl. Catal. 1984, 9, 129.
132. Machida, M.; Eguchi, K.; Arai, H. J. Catal. 1987, 103, 385.
133. Murrell, L. L.; Dispenziere, N. C. J. Catal. 1988, 111, 450. Johnson, M. F. L. J. Catal. 1990, 123, 245. Béguin, B.; Garbowski, E.; Primet, M. J. Catal. 1991, 127, 595.
134. Murrell, L. L.; Dispenziere, N. C. J. Catal. 1988, 111, 450. Johnson, M. F. L. J. Catal. 1990, 123, 245. Béguin, B.; Garbowski, E.; Primet, M. J. Catal. 1991, 127, 595.
135. Murrell, L. L.; Dispenziere, N. C. J. Catal. 1988, 111, 450. Johnson, M. F. L. J. Catal. 1990, 123, 245. Béguin, B.; Garbowski, E.; Primet, M. J. Catal. 1991, 127, 595.
136. Ozawa, M.; Kimura, M. Mater. Sci. Lett. 1990, 9, 291.
137. Harrison, B.; Diwell, A. F.; Hallett, C. Plat. Met. Rev. 1988, 32, 73.
138. Ozawa, M.; Kimura, M.; Isogai, A. J. Less Common Met. 1990, 162, 297.
139. Mizukami, F.; Maeda, K.; Watanabe, M.; Masuda, K.; Sano, T.; Kuno, K. In Catalysis and Automotive Pollution Control II; Studies in Surface Science and Catalysis; Crucq, A., Ed.; Elsevier: Amsterdam, 1991; Vol. 71, p 557.
140. Haack, L. P.; de Vries, J. E.; Otto, K.; Chattha, M. S. Appl. Catal. A 1992, 82, 199. Haack, L. P.; Peters, C. R.; de Vries, J. E ; Otto, K. Appl. Catal. A 1992, 87, 103.
141. Haack, L. P.; de Vries, J. E.; Otto, K.; Chattha, M. S. Appl. Catal. A 1992, 82, 199. Haack, L. P.; Peters, C. R.; de Vries, J. E ; Otto, K. Appl. Catal. A 1992, 87, 103.
142. Matsuda, S.; Kato, A.; Mizumoto, M.; Yamashita, H. Proc. 8th International Congress Catalysis, Berlin, 1984, IV; Verlag Chemie: Weinheim, 1984; p 879.
143. Arai, H.; Machida, M. Catal. Today 1991, 10, 81.
144. Watanabe, N.; Yamashita, H.; Kato, A.; Kawagoe, H.; Matsuda, S. Jpn. Kokai Tokkyo Koho JP 63,175,642; Chem. Abstr. 1989, 110, 64521.
145. Arai, H. Jpn. Kokai Tokkyo Koho JP 63,119,851; Chem. Abstr. 1988, 109, 238143.
146. Mizuno, M.; Yamada, T. Nagoya Kogyo Gijutsu Shikensho Hokoku 1990, 29, 157.
147. Ozawa, M.; Kimura, M.; Isogai, A. J. Less-Common Met. 1990, 162, 297.
148. Yamashita, H.; Kato, A.; Watanabe, N.; Matsuda, S. Nippon Kagaku Kaishi, 1986; p 1169. Kato, A.; Yamashita, H.; Mizumoto, M. Matsuda, S. Jpn. Kokai Tokkyo Koho JP 60,266,-414; Chem. Abstr. 1986, 104, 1,122,239. Vidyasagar, K.; Gopalkrishnan, J.; Rao, C. N. R. J. Solid State Chem. 1985, 58, 29.
149. Yamashita, H.; Kato, A.; Watanabe, N.; Matsuda, S. Nippon Kagaku Kaishi, 1986; p 1169. Kato, A.; Yamashita, H.; Mizumoto, M. Matsuda, S. Jpn. Kokai Tokkyo Koho JP 60,266,-414; Chem. Abstr. 1986, 104, 1,122,239. Vidyasagar, K.; Gopalkrishnan, J.; Rao, C. N. R. J. Solid State Chem. 1985, 58, 29.
150. Yamashita, H.; Kato, A.; Watanabe, N.; Matsuda, S. Nippon Kagaku Kaishi, 1986; p 1169. Kato, A.; Yamashita, H.; Mizumoto, M. Matsuda, S. Jpn. Kokai Tokkyo Koho JP 60,266,-414; Chem. Abstr. 1986, 104, 1,122,239. Vidyasagar, K.; Gopalkrishnan, J.; Rao, C. N. R. J. Solid State Chem. 1985, 58, 29.
151. Kato, A; Yamashita, H.; Kawagoshi, H.; Matsuda, S. J. Am. Ceram. Soc. 1987, 70, C157.
152. Schaper, H.; Doesburg, E B. M.; Van Reijen, L. L. Appl. Catal. 1983, 7, 211.
153. Narula, C. K.; Watkins, W.; Shelef, M. U.S. Patent, 5,210,062, 1993.
154. Caulton, K. G.; Hubert-Pfalzgraf, L. G. Chem. Rev 1990, 90, 969. Hubert-Pfalzgraf, L. G. Polyhedron 1994, 13, 1118.
155. Caulton, K. G.; Hubert-Pfalzgraf, L. G. Chem. Rev 1990, 90, 969. Hubert-Pfalzgraf, L. G. Polyhedron 1994, 13, 1118.
156. Narula, C. K. U.S. Patent 5,134,107, 1992. Narula, C. K. Mater. Res. Soc. Symp. Proc. 1992, 271, 181. Narula, C. K.; Ying, J. Chem. Mater., submitted.
157. Narula, C. K. U.S. Patent 5,134,107, 1992. Narula, C. K. Mater. Res. Soc. Symp. Proc. 1992, 271, 181. Narula, C. K.; Ying, J. Chem. Mater., submitted.
158. Narula, C. K. U.S. Patent 5,134,107, 1992. Narula, C. K. Mater. Res. Soc. Symp. Proc. 1992, 271, 181. Narula, C. K.; Ying, J. Chem. Mater., submitted.
159. Narula, C. K. U.S. Patent 5,404,807, 1995.
160. Yao, M. H.; Liu, D. R.; Baird, R. J.; Usmen, R. K.; McCabe, R. W. Proc. 52nd Annu. Mtg. Microsc. Soc. Am.; Bailey, C. W., Garratt-Reed, A. J., Eds.; San Francisco Press: San Francisco.
161. Schlatter, J. C.; Taylor, K. C. J. Catal. 1977, 49, 42. Oh, S. H.; Fisher, G. B.; Carpenter, J. E.; Goodman, D. W. J. Catal. 1986, 100, 360.
162. Schlatter, J. C.; Taylor, K. C. J. Catal. 1977, 49, 42. Oh, S. H.; Fisher, G. B.; Carpenter, J. E.; Goodman, D. W. J. Catal. 1986, 100, 360.
163. Banerle, G. L.; Service, G. R.; Nobe, K. Ind. Eng. Chem. Prod. Res. Dev. 1972, 11, 54.
164. Yates, D. J. C.; Prestridge, E. B. J. Catal. 1987, 106, 549.
165. Chen, G. C.; Colaianni, M. L.; Chen, P. J.; Yates, J. T.; Fisher, G. B. J. Phys. Chem. 1990, 94, 5059.
166. Yao, H. C.; Japar, S.; Shelef, M. J. Catal. 1977, 50, 407. Yao, H. C.; Stepien, H. K.; Gandhi, H. S. J. Catal. 1980, 61, 547.
167. Yao, H. C.; Japar, S.; Shelef, M. J. Catal. 1977, 50, 407. Yao, H. C.; Stepien, H. K.; Gandhi, H. S. J. Catal. 1980, 61, 547.
168. Wong, C.; McCabe, R. W. J. Catal. 1989, 119, 47
169. Usmen, R.; McCabe, R.; Haack, L.; Graham, G.; Hepburn, J.; Watkins, W. L. H. J. Catal. 1992, 134, 702.
170. Yao, H. C.; Stepien, H. K.; Gandhi, H. S. J. Catal. 1980, 61, 547. Stepien, H. K.; Williamson, W. B.; Gandhi, H. S. SAE-800843.
171. Yao, H. C.; Stepien, H. K.; Gandhi, H. S. J. Catal. 1980, 61, 547. Stepien, H. K.; Williamson, W. B.; Gandhi, H. S. SAE-800843.
172. Summers, J. C.; Williamson, W. B.; Henk, M. G. SAE-880281. Summers, J. C.; White, J. J.; Williamson, W. B. SAE-890794.
173. Summers, J. C.; Williamson, W. B.; Henk, M. G. SAE-880281. Summers, J. C.; White, J. J.; Williamson, W. B. SAE-890794.
174. Eurpean Patent 0,314,057 A1.
175. Muraki, H.; Shinjoh, H.; Sobukawa, K.; Yokota, K.; Fujitani, Y. Ind. Eng. Chem. Prod. Res. Dev. 1986, 25, 325. Muraki, H.; Sinjoh, H.; Fujitani, Y. Appl. Catal. 1986, 22, 325. Muraki, H. SAE 910842.
176. Muraki, H.; Shinjoh, H.; Sobukawa, K.; Yokota, K.; Fujitani, Y. Ind. Eng. Chem. Prod. Res. Dev. 1986, 25, 325. Muraki, H.; Sinjoh, H.; Fujitani, Y. Appl. Catal. 1986, 22, 325. Muraki, H. SAE 910842.
177. Muraki, H.; Shinjoh, H.; Sobukawa, K.; Yokota, K.; Fujitani, Y. Ind. Eng. Chem. Prod. Res. Dev. 1986, 25, 325. Muraki, H.; Sinjoh, H.; Fujitani, Y. Appl. Catal. 1986, 22, 325. Muraki, H. SAE 910842.
178. Shelef, M.; Graham, G. W. Catal. Rev. Sci. Eng. 1994, 36, 433.
179. Hepburn, J. S.; Patel, K. S.; Meneghel, M. G.; Gandhi, H. S.; Engelhard, Three Way Catalyst Development Team; Johnson Matthey Three Way Catalyst Development Team; SAE 941058.
180. Narula, C. K.; Watkins, W. L. H.; Chattha, M. S U.S. Patent 5,234,881, 1993.
181. Gandhi, H. S.; Yao, H. C.; Stepien, H. K. ACS Symposium Series No. 178; Bell, A. T., Hegedus, L., Eds.; 1982; p 143. deVries, J. E.; Yao, H. C.; Baird, R. J.; Gandhi, H. S. J. Catal. 1983, 84, 8. Adams, K. M.; Gandhi, H. S. Ind. Eng. Chem. Prod. Res. Dev. 1986, 22, 207. Plummer, H. K.; Shinozaki, S.; Adams, K. M.; Gandhi, H. S. J. Mol. Catal. 1983, 20, 251.
182. Gandhi, H. S.; Yao, H. C.; Stepien, H. K. ACS Symposium Series No. 178; Bell, A. T., Hegedus, L., Eds.; 1982; p 143. deVries, J. E.; Yao, H. C.; Baird, R. J.; Gandhi, H. S. J. Catal. 1983, 84, 8. Adams, K. M.; Gandhi, H. S. Ind. Eng. Chem. Prod. Res. Dev. 1986, 22, 207. Plummer, H. K.; Shinozaki, S.; Adams, K. M.; Gandhi, H. S. J. Mol. Catal. 1983, 20, 251.
183. Gandhi, H. S.; Yao, H. C.; Stepien, H. K. ACS Symposium Series No. 178; Bell, A. T., Hegedus, L., Eds.; 1982; p 143. deVries, J. E.; Yao, H. C.; Baird, R. J.; Gandhi, H. S. J. Catal. 1983, 84, 8. Adams, K. M.; Gandhi, H. S. Ind. Eng. Chem. Prod. Res. Dev. 1986, 22, 207. Plummer, H. K.; Shinozaki, S.; Adams, K. M.; Gandhi, H. S. J. Mol. Catal. 1983, 20, 251.
184. Gandhi, H. S.; Yao, H. C.; Stepien, H. K. ACS Symposium Series No. 178; Bell, A. T., Hegedus, L., Eds.; 1982; p 143. deVries, J. E.; Yao, H. C.; Baird, R. J.; Gandhi, H. S. J. Catal. 1983, 84, 8. Adams, K. M.; Gandhi, H. S. Ind. Eng. Chem. Prod. Res. Dev. 1986, 22, 207. Plummer, H. K.; Shinozaki, S.; Adams, K. M.; Gandhi, H. S. J. Mol. Catal. 1983, 20, 251.
185. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1992, 82, 51. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1993, B2, 131. Halasz, I.; Brenner, A.; Shelef, M. 1992, 16, 311. Halasz, I.; Brenner, A ; Shelef, M. Catal. Lett. 1993, 18, 289.
186. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1992, 82, 51. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1993, B2, 131. Halasz, I.; Brenner, A.; Shelef, M. 1992, 16, 311. Halasz, I.; Brenner, A ; Shelef, M. Catal. Lett. 1993, 18, 289.
187. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1992, 82, 51. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1993, B2, 131. Halasz, I.; Brenner, A.; Shelef, M. 1992, 16, 311. Halasz, I.; Brenner, A ; Shelef, M. Catal. Lett. 1993, 18, 289.
188. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1992, 82, 51. Halasz, I.; Brenner, A.; Shelef, M. Appl. Catal. 1993, B2, 131. Halasz, I.; Brenner, A.; Shelef, M. 1992, 16, 311. Halasz, I.; Brenner, A ; Shelef, M. Catal. Lett. 1993, 18, 289.
189. Whittenberger, W. A.; Kubsh, J. E. SAE 910613, 1991. Hurley, R. G.; Hansen, L.A.; LaCourse, D. L.; Watkins, W. L. H.; Gandhi, H. S.; Whittenberger, W. A. SAE 900504, 1990. Heimrich, M. J.; Albu, S.; Osborne, J. SAE 910612, 1991. Heimrich, M. J. SAE 902115, 1990.
190. Whittenberger, W. A.; Kubsh, J. E. SAE 910613, 1991. Hurley, R. G.; Hansen, L.A.; LaCourse, D. L.; Watkins, W. L. H.; Gandhi, H. S.; Whittenberger, W. A. SAE 900504, 1990. Heimrich, M. J.; Albu, S.; Osborne, J. SAE 910612, 1991. Heimrich, M. J. SAE 902115, 1990.
191. Whittenberger, W. A.; Kubsh, J. E. SAE 910613, 1991. Hurley, R. G.; Hansen, L.A.; LaCourse, D. L.; Watkins, W. L. H.; Gandhi, H. S.; Whittenberger, W. A. SAE 900504, 1990. Heimrich, M. J.; Albu, S.; Osborne, J. SAE 910612, 1991. Heimrich, M. J. SAE 902115, 1990.
192. Whittenberger, W. A.; Kubsh, J. E. SAE 910613, 1991. Hurley, R. G.; Hansen, L.A.; LaCourse, D. L.; Watkins, W. L. H.; Gandhi, H. S.; Whittenberger, W. A. SAE 900504, 1990. Heimrich, M. J.; Albu, S.; Osborne, J. SAE 910612, 1991. Heimrich, M. J. SAE 902115, 1990.
193. Hurley, R. G.; Guttridge, D. L.; Hansen, L. A.; Pawlowicz, R. J.; Smolinski, J.M.; Gandhi, H. S. SAE 912384, 1991.
194. Langen, P.; Theissen, M.; Mallog, J.; Zielinski, R. SAE 940470, 1994.
195. Mizuno, H.; Abe, F.; Hashimoto, S.; Kondo, T. SAE 940466, 1994.
196. Häffle, E.; Säger, M. WO 92/17692, 1992.
197. Narula, C. K.; Visser, J. H.; Adamczyk, A. A. U.S. Patent, 5,-480,622, 1996.
198. Narula, C. K.; Czubarow, P.; Seyferth, D. Chem. Vap. Deposition 1995, 1, 51.
199. Beck, J. S.; Albani, C. R.; McGhie, A. R.; Rothman, J. B.; Sneddon, L. G. Chem. Mater. 1989, 1, 433.
200. Paine, R. T.; Narula, C. K.; Schaeffer, R.; Datye, A. K. Chem. Mater. 1989, 1, 486. Datye, A. K.; Paine, R. T.; Narula, C. K.; Allard, L. F. Mater. Res. Soc. Symp. Proc. 1989, 153, 97.
201. Paine, R. T.; Narula, C. K.; Schaeffer, R.; Datye, A. K. Chem. Mater. 1989, 1, 486. Datye, A. K.; Paine, R. T.; Narula, C. K.; Allard, L. F. Mater. Res. Soc. Symp. Proc. 1989, 153, 97.
202. Kummer, J. T. Prog. Energy Combust. Sci. 1980, 6, 177.
203. Bonardo, P.; Mortara, W. 23rd FISITA Congr. Paper No. 905117, Torino, May 7-11, 1990.
204. Shelef, M. Chem. Rev. 1995, 95, 209.
205. Ritscher, J. S.; Sandner, M. R. U.S. Patent 4,297,328, 1981.
206. Iwamoto, M.; Hamada, H. Catal. Today 1991, 10, 57.
207. Iwamoto, M.; Yahiro, H.; Tanda, K.; Mizuno, N.; Mine, Y.; Kagawa, S. J. Phys. Chem. 1991, 95, 3727.
208. Khara, K. C. C.; Robota, H. J.; Liu, D. Appl. Catal. B 1993, 2, 225.
209. Kornatowski, J.; Baur, W. H.; Pieper, G.; Rozawadowski, M.; Schmitz, W.; Cichowlas, A. J. Chem. Soc., Faraday Trans. 1992, 88, 1339.
210. d'Itri, J. L.; Sachtler, W. M. H. Appl. Catal. B 1993, 2, L7.
211. Sano, T.; Suzuki, K.; Shoji, H.; Ikai, S.; Okabe, K.; Murakami, T.; Shin, S.; Hagiwara, H.; Takaya, H. Chem. Lett. 1987, 1421. Suzuki, K.; Sano, T.; Shoji, H.; Murakami, T.; Ikai, S.; Shin, S.; Hagiwara, H.; Takaya, H. Chem. Lett. 1987, 1507.
212. Sano, T.; Suzuki, K.; Shoji, H.; Ikai, S.; Okabe, K.; Murakami, T.; Shin, S.; Hagiwara, H.; Takaya, H. Chem. Lett. 1987, 1421. Suzuki, K.; Sano, T.; Shoji, H.; Murakami, T.; Ikai, S.; Shin, S.; Hagiwara, H.; Takaya, H. Chem. Lett. 1987, 1507.
213. Kintaichi, Y.; Hamada, H.; Tabata, M.; Sasaki, M.; Ito, T. Catal. Lett. 1990, 6, 239. Ukisu, Y.; Sato, S.; Muramatsu, G.; Yoshida, K. Catal. Lett 1991, 11, 177. Ukisu, Y.; Sato, S.; Abe, A.; Yoshida, K. Appl. Catal. B 1993, 2, 147. Hamada, H.; Kintaichi, Y.; Sasaki, M.; Ito, T., Tabata, M. Appl. Catal. 1991, 75, L1. Torikai, Y.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Catal. Lett. 1991, 9, 91. Hosose, H.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Chem. Lett. 1991, 1859.
214. Kintaichi, Y.; Hamada, H.; Tabata, M.; Sasaki, M.; Ito, T. Catal. Lett. 1990, 6, 239. Ukisu, Y.; Sato, S.; Muramatsu, G.; Yoshida, K. Catal. Lett 1991, 11, 177. Ukisu, Y.; Sato, S.; Abe, A.; Yoshida, K. Appl. Catal. B 1993, 2, 147. Hamada, H.; Kintaichi, Y.; Sasaki, M.; Ito, T., Tabata, M. Appl. Catal. 1991, 75, L1. Torikai, Y.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Catal. Lett. 1991, 9, 91. Hosose, H.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Chem. Lett. 1991, 1859.
215. Kintaichi, Y.; Hamada, H.; Tabata, M.; Sasaki, M.; Ito, T. Catal. Lett. 1990, 6, 239. Ukisu, Y.; Sato, S.; Muramatsu, G.; Yoshida, K. Catal. Lett 1991, 11, 177. Ukisu, Y.; Sato, S.; Abe, A.; Yoshida, K. Appl. Catal. B 1993, 2, 147. Hamada, H.; Kintaichi, Y.; Sasaki, M.; Ito, T., Tabata, M. Appl. Catal. 1991, 75, L1. Torikai, Y.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Catal. Lett. 1991, 9, 91. Hosose, H.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Chem. Lett. 1991, 1859.
216. Kintaichi, Y.; Hamada, H.; Tabata, M.; Sasaki, M.; Ito, T. Catal. Lett. 1990, 6, 239. Ukisu, Y.; Sato, S.; Muramatsu, G.; Yoshida, K. Catal. Lett 1991, 11, 177. Ukisu, Y.; Sato, S.; Abe, A.; Yoshida, K. Appl. Catal. B 1993, 2, 147. Hamada, H.; Kintaichi, Y.; Sasaki, M.; Ito, T., Tabata, M. Appl. Catal. 1991, 75, L1. Torikai, Y.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Catal. Lett. 1991, 9, 91. Hosose, H.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Chem. Lett. 1991, 1859.
217. Kintaichi, Y.; Hamada, H.; Tabata, M.; Sasaki, M.; Ito, T. Catal. Lett. 1990, 6, 239. Ukisu, Y.; Sato, S.; Muramatsu, G.; Yoshida, K. Catal. Lett 1991, 11, 177. Ukisu, Y.; Sato, S.; Abe, A.; Yoshida, K. Appl. Catal. B 1993, 2, 147. Hamada, H.; Kintaichi, Y.; Sasaki, M.; Ito, T., Tabata, M. Appl. Catal. 1991, 75, L1. Torikai, Y.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Catal. Lett. 1991, 9, 91. Hosose, H.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Chem. Lett. 1991, 1859.
218. Kintaichi, Y.; Hamada, H.; Tabata, M.; Sasaki, M.; Ito, T. Catal. Lett. 1990, 6, 239. Ukisu, Y.; Sato, S.; Muramatsu, G.; Yoshida, K. Catal. Lett 1991, 11, 177. Ukisu, Y.; Sato, S.; Abe, A.; Yoshida, K. Appl. Catal. B 1993, 2, 147. Hamada, H.; Kintaichi, Y.; Sasaki, M.; Ito, T., Tabata, M. Appl. Catal. 1991, 75, L1. Torikai, Y.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Catal. Lett. 1991, 9, 91. Hosose, H.; Yahiro, H.; Mizuno, N.; Iwamoto, M. Chem. Lett. 1991, 1859.
219. Klug, K. H.; Kremer, H. GWF, Gas-Wasserfach: GasErdgas 1992, 133, 32. Obuchi, A.; Ohi, A.; Nakamuraa, M.; Ogata, A.; Mizuno, K.; Ohuchi, H. Appl. Catal. B 1993, 2, 71. Zhang, G.; Yamaguchi, T.; Kawakami, H.; Suzuki, T. Appl. Catal. B 1992, 1, L15.
220. Klug, K. H.; Kremer, H. GWF, Gas-Wasserfach: GasErdgas 1992, 133, 32. Obuchi, A.; Ohi, A.; Nakamuraa, M.; Ogata, A.; Mizuno, K.; Ohuchi, H. Appl. Catal. B 1993, 2, 71. Zhang, G.; Yamaguchi, T.; Kawakami, H.; Suzuki, T. Appl. Catal. B 1992, 1, L15.
221. Klug, K. H.; Kremer, H. GWF, Gas-Wasserfach: GasErdgas 1992, 133, 32. Obuchi, A.; Ohi, A.; Nakamuraa, M.; Ogata, A.; Mizuno, K.; Ohuchi, H. Appl. Catal. B 1993, 2, 71. Zhang, G.; Yamaguchi, T.; Kawakami, H.; Suzuki, T. Appl. Catal. B 1992, 1, L15.
222. Shelef, M. Catal. Rev. Sci. Eng. 1975, 11, 1.
223. Leenars, A. F. M.; Keizer, K.; Burggraaf, A. J. J. Mater. Sci. 1984, 19, 1077. Leenars, A. F. M.; Burggraaf, A. J. J. Colloid Interface Sci. 1985, 105, 27.
224. Leenars, A. F. M.; Keizer, K.; Burggraaf, A. J. J. Mater. Sci. 1984, 19, 1077. Leenars, A. F. M.; Burggraaf, A. J. J. Colloid Interface Sci. 1985, 105, 27.
225. Narula, C. K.; Jen, H.-W.; Gandhi, H. U.S. Patent application, 08/311,298, Sept 23, 1994.
226. Deeba, M.; Feeley, J.; Farrauto, R. J.; Steinbock, N.; Punke, A. SAE 952491.
227. Leyrer, J.; Lox, E. S.; Strehlau, W. SAE 952495
228. Adams, K. A., Cavataio, J. V.; Hammerle, R. H. Appl Catal. B, in press.
229. Tao, W.; Golovoy, A.; Zinbo, M.; Bauer, D. R. SPE 1993 ANTEC Proc. 1993, 39, 3427.