Wiredrawing by computer simulation

Wire Journal International

Volumn 32, Issue 4, 1999, Pages 166-183

  Shemenski, Robert M ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000966535     PISSN: 02774275     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (69)

1. A.B. Dove, "Corrosion and Hot Galvanizing of Iron and Steel," Wire and Wire Products, September 1934, p. 298.
2. A.B. Dove, "A.C. Electro-Pickling: A Better Method of Pickling," Wire and Wire Products, October 1937, p. 563.
3. A.B. Dove, "The Corrosion of Steel and its Protective Metallic Coatings," Wire and Wire Products, January 1950, p. 29.
4. A.B. Dove, "The Influence of Nail Design and Manufacturing Practices on Joint Strength," Wire and Wire Products, June 1955, p. 657.
5. A.B. Dove, "The Cleaning of Carbon Steel Wire as Affected by the Metallurgical Nature of the Scale," Wire and Wire Products, November 1960, p. 1547.
6. A.B. Dove, "The Stelmor Process for Controlled Cooling of Rod Part II: Wire Manufacture Using Stelmor Controlled Cooled Rod," Wire and Wire Products, October 1964, p. 1610.
7. A.B. Dove, "The Foundations of Ferrous Wire Operations," November 1979.
8. A.B. Dove, "A simple little tool," Wire Journal International, September 1981, p. 106.
9. A.B. Dove, "The past, present, and future of the steel wire industry," Wire Journal International, November 1983, p. 58.
10. A.B. Dove, "The production, use, and corrosion of wire for prestressed concrete reinforcement," Wire Journal International, May 1990, p. 19.
11. H.J. Godfrey, "The Physical Properties of Steel Wire as Affected by Variations in the Drawing Operations," Wire and Wire Products, February 1942, p. 704.
12. H.J. Godfrey, "The Physical Properties of High Carbon Steel Rope Wire as Affected by Variations in Patenting," Wire and Wire Products, October 1944, p. 635.
13. D. Lewis and H.J. Godfrey, "Back Pull Wire Drawing," Wire and Wire Products, October 1949, p. 873.
14. H.J. Godfrey, "Significance of the Elongation Test on Wire," Wire and Wire Products, October 1952, p. 1015.
15. H.J. Godfrey, "The Progress of Mechanical Descaling of Rods for Wire Drawing," Wire and Wire Products, May 1954, p. 501.
16. H.J. Godfrey, "Aluminum Coating of Steel Wire," Wire and Wire Products, November 1958, p. 1349.
17. H.J. Godfrey, "High Temperature Tests on Aircraft Control Cable," Wire and Wire Products, November 1959, p. 1473
18. H.J. Godfrey, "The Strengthening of Steel by Wire Drawing," Wire and Wire Products, January 1963, p. 52.
19. H.J. Godfrey, "Discussion on Flanders-Alexander paper," Wire Journal International, December 1979, p. 65.
20. E. Aernoudt, "Materials response to wiredrawing," Wire Journal International International, March 1989, p. 53.
21. B. Avitzur, "Limitations on wire size during drawing and extrusion," Wire Journal International, March 1992, p. 51.
22. B. Avitzur, Metal Forming Process and Analysis, McGraw Hill Book Company, New York, 1968.
23. B. Avitzur, W.M. Evans, "Metal flow through conical converging dies," Wire Journal International, November 1969, p. 60.
24. B. Avitzur, "The use of the personal computer for simulation of the process of wiredrawing and extrusion in an interactive, user-friendly mode," Wire Journal International, January 1990, p. 48.
25. B. Avitzur, "Lubricant evaluation for fine wiredrawing," Wire Journal International, October 1997, p. 94.
26. C.M. Bae and W.J. Nam, "Void formation at large drawing strain in pearlitic steel wires," Wire Journal International, June 1997, p. 102.
27. G. Baker and R.N. Wright, "Drawing research with a high-speed single die block," Wire Journal International, April 1992, p. 71.
28. K.J. Bowman, "Materials Concepts Using Mathcad Part VI: Principal Stress Contours in the Vicinity of a Crack Under Stress," Journal of Metals, March 1996, p. 70.
29. S. Brandal and H. Valberg, "Analysis of the deformation process during wiredrawing by means of the finite element method," Wire Journal International, March 1982, p. 64.
30. Brownrigg, "Carbide Die Design - Impact on Wire Quality," Advances in Fracture Research (Fracture '84), 2, Pergammon Press, Ltd., December 1984.
31. L. Corbin, "Interpretation of wear and failure in wiredrawing dies," Wire Journal International, November 1995, p. 68.
32. M.L. Devenpeck, "Experimental Evaluation of Theoretically Ideal Drawing Dies," Metal Forming: Interrelation Between Theory and Practice (Ed. A.L. Hoffmanner), Plenum Publishing Corp., New York, New York, USA
33. M.L. Devenpeck, and O. Richmond, "Strip-Drawing Experiments with a Sigmoidal Die Profile," Journal of Engineering for Industry, November 1965, p. 425.
34. Ferrous Wire: The Manufacture of Ferrous Wire, Vol. 1, Ed. A.B. Dove, The Wire Association International
35. J.R. Douglas, "Convex and Sigmoidal Draw Dies: What's in Them for You?" Wire Journal International, September 1971, p. 115.
36. H.L. Gegel, J.C. Malas, J.S. Gunasekera, J.T. Morgan, and S.M. Doraivelu, "Computer-Aided Design of Extrusion Dies by Metal Flow Simulation," Advisory Group for Aerospace Research and Development, Lecture Series No. 137, Neuilly sur Seine, France.
37. J. Giridhar and W.J. van Ooij, "A new NiZn / ZnCo - coated steel wire for tire cord applications," 62nd Annual Convention, Louisville, Kentucky. October 1992.
38. R. Glodowski and A Wilson. "Melt-to-tensile high carbon rods for direct drawn wire applications," Wire Journal International, November 1994, p. 78.
39. L. Godecki, "The Delamination of Spring Wires During Torsion Testing," Wire Industry, January 1969, p. 47.
40. L. Godecki, "Phenomena Associated with the Torsional Deformation of Steel Wires," Wire Industry, October 1971, p. 719.
41. L. Godecki, "Influence of Drafting Schedule and Die Angle on Properties of Steel Spring Wire," Wire Industry, 1972, p. 518.
42. J.S. Gunasekera and S. Hoshino, "Analysis of Extrusion of Polygonal Sections Through Streamlined Dies," Journal of Engineering for Industry, August 1985, p. 229.
43. G.E. Hammer, R.M. Shemensk and T.W. Starinshak, "Auger electron spectroscopy applied to a tribological model for wiredrawing," Wire Journal International, April 1993, p. 23.
44. K. Han, G.D.W. Smith and D.V. Edmonds, "Development in Ultra-High-Carbon Steels Wire Rod Production Achieved Through Microalloying Additions," Materials & Design, 14, 1993, p. 79.
45. K. Han, G.D.W. Smith, D.V. Edmonds, "Pearlite Phase Transformation in Si and V Steel," Metallurgical and Materials Transactions A, July 1995, p. 1617.
46. Lefever, U. D'Haene, W. Van Raemdonck, E. Aernoudt, P. Van Houtte and J. Gil Sevillano, "Modeling of the Delamination of High Strength Steel Wire," TMS Annual Meeting, Cincinnati, Ohio, USA, 1997.
47. P. Ligeris, "Considerations relating to the helical separation of cast wire," Wire Journal International International, January 1997, p. 84.
48. T. Maxwell, "Carbide die design - impact on wire quality," Wire Journal International, December 1991, p. 45.
49. A. Middlemiss and D.P. Hague, "Torsional Ductility in Carbon Steel Wire - Parts I, II and III," Wire Industry, 1973, p. 625.
50. Y. Nakamura, H. Kawakami and T. Fujita, Y. Yamada, "New cooling system for high-speed wiredrawing," Wire Journal International, July 1976, p. 59.
51. I. Oachiai, H. Ohba and A. Kawana. "Effects of titanium addition on strain aging of low-carbon steel wire rod," Wire Journal International, December 1994, p. 74.
52. S.P. Pednekar, "Failure of Tungsten Carbide-Cobalt Lamination Dies: A Corrosion Evaluation," Corrosion, October 1997, p. 813.
53. J.W. Pilarczyk, "Hydrodynamic drawing effects on wire ASTRO characteristics," Wire Journal International, September 1997, p. 70.
54. J.W. Pilarczyk, M. Pietrzyk, H. Dyja, B. Golis, "FEM analysis of metal flow in hydrodynamic drawing of steel wires," Wire Journal International. November 1997, p. 76.
55. A. Prakash, "Life Prediction of Steel Tire Cords," Rubber World, May 1987, 196, p. 36.
56. D. Raghu and J. B.C. Wu, "Recent Developments in Wear-and Corrosion-Resistant Alloys for the Oil Industry," Materials Protection, November 1997, p. 27.
57. G.C. Reid, "Analysis of wire-drawing using a computer program and a load cell system," Wire Journal International, March 1983, p. 52.
58. P. Renz, W. Steuff and R. Kapp, "Possibilities of influencing residual stresses in drawn wires and bars," Wire Journal International, January 1996, p. 64.
59. J.H. Rigo, "Critical process parameters in wiredrawing with dry lubricants," Wire Journal International, June 1972, p. 43.
60. A. Robonyi, "Torsion Tests on Wire," Wire Industry, 1989, p. 350.
61. J. Tranier, "Wire drafting calculations the easy way," Wire Journal International, April 1980, p. 60.
62. S.S. Vijayakar, "Lubricated Wear of Brass Coated Steel Sliding on Tungsten Carbide Die Material," Masters Thesis, The Ohio State University, 1989.
63. S.S. Vijayakar, T.W. Starinshak, A. Prakash, K.M. Kot and A.W. Bhagwat, "Optimization of die geometry and drawing parameters in high-strength cord production," Wire Journal International, November 1995, p. 78.
64. S.S. Vijayakar, "Thermal influences on residual stresses in drawn wire - a finite element analysis," Wire Journal International, June 1997, p. 116.
65. R.N. Wright, "Mechanical analysis and die design," Wire Journal International, October 1979, p. 60.
66. R.N. Wright, "Physical conditions in the lubricant layer," Wire Journal International, August 1997, p. 88.
67. W. Van Raemdonck, and I. Lefever, U. D'Haene, "Torsional tests as a tool for high strength wire evaluation," Wire Journal International, June 1994, p. 68.
68. Z. Zimmerman and R. Henry, "Drawing fine wire on wet wiredrawing machines," Wire Journal International, September 1984, p. 134.
69. J.A. Schey, "Friction in Metalworking," Tribology in Metalworking, American Society for Metals, June 1984, Chapter 2, p. 11.