Fluid mechanics of spin casting of metals

Annual Review of Fluid Mechanics

Volumn 29, Issue , 1997, Pages 373-397

  Steen, Paul H ^a   Karcher, Christian ^b  

^a Cornell University   (United States)

^b DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Chill block; Melt spinning; Planar flow; Single roll

Indexed keywords

EID: 0000673058     PISSN: 00664189     EISSN: None     Source Type: Book Series    
DOI: 10.1146/annurev.fluid.29.1.373     Document Type: Article

References (73)

1. Anderson DM, Davis SH. 1994. Fluid flow, heat transfer, and solidification near tri-junctions. J. Cryst. Growth 142:245-52
2. Anderson DM, Worster MG, Davis SH. 1996. The case for a dynamic contact angle in containerless solidification. J. Cryst. Growth 163:329-38
3. Anestiev LA. 1991. An analysis of the dependence between the ribbon dimensions and the technological parameters for the planar flow casting method. Mater. Sci. Eng. A131:115-21
4. Antony TR, Cline HE. 1979. Dimensional variations in Newtonian-quenched metal ribbons formed by melt spinning and melt extraction. J. Appl. Phys. 50(1):245-54
5. Batchelor, GK. 1956. On steady laminar flow with closed streamlines at large Reynolds number. J. Fluid Mech. 1:177-90
6. Belden RH. 1985. Commercializing a new product. Chem. Eng. Prog. May:27-31
7. Berger S, Ai D. 1988. A simple fluid mechanical model for planar flow casting melt-spinning. Met. Trans. B. 19:571-79
8. Bessemer H. 1865. U.S. Patent No. 49053
9. Birat JP. 1992. Direct casting of thin strip steel. Endeavour, New Ser. 16(3):110-16
10. Birat JP, Blin P, Jacquot JL, Riboud P, Thomas B. 1989. Near net shape continuous casting of flat products at IRSID. Rev. Met. 86:920-30
11. Brimacombe JK, Samarasekera IV. 1995. The challenges of thin slab casting. Proc. Can. Inst. Mining Metall. Petrol., Montreal, pp. 33-53. Montreal: CIM Publishers
12. Burggraf OR. 1966. Analytical and numerical studies of the structure of steady separated flows J. Fluid Mech. 24:113-51
13. Butler IG, Kurz W, Guillot J. Lux B. 1972. The production of metal fibres and wires directly from the melt. Fib. Sci. Tech. 5(4):243-62
14. Carey B, Taraglio B, Romanowski C. 1996. See Matthys & Truckner 1996, pp. 29-41
15. Carpenter JK, Agger EC, Steen PH. 1991. Fluid mechanics and heat transfer of planar-flow melt spinning. In Modeling of Casting, Welding and Advanced Solidification Processes V, ed. M Rappaz, MR Ozgu, KW Mahin, pp. 621-27. Warrendale, PA: TMS
16. Carpenter JK, Steen PH. 1992. Planar-flow spin casting of molten metals: process behavior. J. Mat. Sci. 27:215-25
17. Carpenter JK, Steen PH. 1996. Heat transfer and solidification in planar-flow melt-spinning: high wheel speeds. Int. J. Heat Mass. In press
18. Carslaw HS, Jaeger JC. 1959. Conduction of Heat in Solids, p. 282. Oxford, UK: Oxford University Press
19. Chen CW, Hwang WS. 1995. A modified free surface treatment for the modeling of puddle formation in planar flow casting process. Iron Steel Inst. Japan Int. 35(4):393-401
20. Chu MG, Giron A, Granger DA. 1986. Microstructure and heat flow in melt-spun aluminum alloys. In Proc. Int. Conf. on Rapidly Solidified Materials 03-05. Metals Park, OH: ASM
21. Chu MG, Granger DA. 1990. Solidification and microstructure analysis of rapidly solidified melt-spun Al-Fe alloys. Met. Trans. A 21:205-12
22. Clyne TW. 1984. Numerical treatment of rapid solidification. Met. Trans. B 15B:369-81
23. Cramb AW. 1996. See Matthys & Truckner 1996, pp. 1-11
24. Davis SH. 1990. Hydrodynamic interactions in directional solidification. J. Fluid Mech. 212:241-62
25. Duwez P, Willens RH, Klement Jr W. 1960. Continuous series of metastable solid solutions in silver-copper alloys. J. Appl. Phys. 31:1136
26. Fiedler H, Mühlbach H, Stehani G. 1984. The effect of the main processing parameters on the geometry of amorphous metal ribbons during planar flow casting (PFC). J. Mat. Sci. 19:3229-35
27. Forth SA, Wheeler AA. 1989. Hydrodynamic and morphological stability of the unidirectional solidification of a freezing binary alloy: asimple model. J. Fluid Mech. 202:339-66
28. Frommeyer G, Ludwig A. 1992. High-speed temperature measurements during rapid solidification of iron-silicon ribbons, produced by planar flow casting. Steel Research 63(9):399-404
29. de Gennes PG. 1985. Wetting: statistics and dynamics. Rev. Mod. Phys. 57(3)1:827-63
30. Glicksman ME, Coriell SR, McFadden GB. 1986. Interactions of flows with the crystal-melt interface. Annu. Rev. Fluid Mech. 18:307-35
31. Gong Z, Wilde P, Matthys EF. 1991. Numerical modelling of the planar flow melt-spinning process and experimental investigation of its solidification puddle dynamics. Int. J. Rapid Solidif. 6:1-28
32. Gutierrez EM, Szekely J. 1986. A mathematical model of the planar flow melt spinning process. Met. Trans. B. 17B:695-703
33. Hillmann H, Hilzinger HR. 1978. On the formation of amorphous ribbons by the melt spin technique. In Rapidly Quenched Metals III, 1:22-29. London: The Metals Soc.
34. Huang SC. 1981. The effect of melt delivery conditions on the casting of amorphous metal ribbons. In Proc. 4th Int. Conf. on Rapidly Quenched Metals (Sendai), pp. 65-68. Sendai, Japan: The Japan Institute of Metals
35. Huang SC, Fiedler HC. 1981. Effects of wheel surface conditions on the casting of amorphous metal ribbons. Met. Trans. A. 12A:1107-12
36. Ibaraki T. 1996. Planar flow melt-spinning: experimental investigation on solidification, dynamics of the liquid puddle and process operability. MS thesis. Cornell Univ., Ithaca, NY
37. Ibaraki T, Steen PH. 1995. Planar-flow spin casting: puddle dynamics and process behavior. In Modelling of Casting, Welding, and Advanced Solidification Processes VII, ed. M Cross, J Campbell, pp. 889-95. Warrendale, PA: TMS
38. Ibaraki T, Steen PH. 1996. See Matthys & Truckner 1996, pp. 159-71
39. Jones H. 1982. Rapid Solidification of Metals and Alloys, pp. 1-83. London: Inst. Metall.
40. Jones H. 1984. Review: the status of rapid solidification of alloys in research and application. J. Mater. Sci. 19:1043-76
41. Karcher C, Steen PH. 1995. Flow and solidification with transverse pulling: boundary layer scalings and their effect on interfacial stability. Bull. Am. Phys. Soc. 40(12).
42. Katgerman III L. 1980. Theoretical analysis of ribbon thickness formation during melt spinning. Scripta Metall. 14(8):861-64
43. Kavesh S. 1978. Principles of fabrication. In Metallic Glasses, ed. JH Gilman, HJ Leamy, pp. 36-73. Metals Park, OH: ASM
44. Korzekwa D, Jacobson LA. 1992. See Matthys 1992, pp. 107-22
45. Kukura J, Ford K, Singh A, Steen PH, Ibaraki T. 1995. Measurement of heat transfer coefficient in planar flow casting. In Simulations of Materials Processing: Theory, Methods, and Applications, ed. SF Shen, P Dawson, pp. 1153-57. Rotterdam: Balkema
46. Kurz W, Fischer DJ. 1989. Fundamentals of Solidification. Aedermannsdorf, Switzerland: Trans Tech. 3rd ed.
47. Li G, Thomas BG. 1996. Transient thermal model of the continuous single-wheel thin-strip casting process. Met. Trans. B 27(3):509-25
48. Liebermann HH, Bye RL. 1985. Proc. TMS-AIME Northeast Reg. Meet., Morristown, NJ, pp. 61-76. Warrendale, PA: Metall. Soc. AIME
49. Ludwig A, Frommeyer G, Gránásy L. 1991. Modelling of dendritic growth during ribbon formation in planar flow casting. Mat. Sci. Eng. A133:722-25
50. Maringer RE. 1988. Solidification on a substrate. Mat. Sci. Eng. 98:13-20
51. Matthys EF, ed. 1992. Melt Spinning, Strip Casting: Research and Implementation. Warrendale, PA: TMS
52. Matthys EF, Truckner WG, eds. 1996. Melt spinning, strip casting and slab casting. Warrendale, PA: TMS. 253 pp.
53. Mehrotra SP, Tandon, R. 1992. A mathematical model of a single-roll continuous strip caster based on fluid-mechanics considerations. Steel Research 63(5):205-11
54. Mühlbach H, Stehani G, Sellger R, Fiedler H. 1987. Cooling rate and heat transfer coefficient during planar flow casting of microcrystalline steel ribbons. Int. J. Rapid Solidif. 3:83-94
55. Mullins WW, Sekerka RF. 1964. Stability of a planar interface during solidification of a dilute binary alloy. J. Appl. Phys. 35:444-51
56. Narasimhan MC. 1979. U.S. Patent No. 4142571
57. Pond RB. 1959. U.S. Patent No. 2825108
58. Pond RB, Maringer RE, Mobley CE. 1976. High-rate continuous casting of metallic fibers and filaments. In New Trends in Materials Processing, pp. 128-164. Metals Park, OH: ASM. 363 pp.
59. Praisner TJ, Chen JSJ, Tseng AA. 1995. An experimental study of process behavior in planar flow melt spinning. Met. Mater. Trans. B 26B:1199-1208
60. Preston R. 1991. American Steel, pp. 91-102. New York, NY: Prentice Hall. 278 pp.
61. Ruschak KJ. 1985. Coating Flows. Annu. Rev. Fluid Mech. 17:65-89
62. Schlichting H. 1982. Grenzschicht Theorie, pp. 385-93. Karlsruhe: Braun. 843 pp. 8 Aufl.
63. Strange EA, Pim CH. 1908. U.S. Patent No. 905758
64. Sun Z, Davies HA. 1988. Computer modelling of ribbon formation in the melt spinning of crystalline metals. Mater. Sci. Eng. 98:71-74
65. Sung JK, Kim MC, Park CG, Kim YS. 1994. Theoretical expectation of strip thickness in planar flow casting process. Mater. Sci. Eng. A181/182:1237-42
66. Takeshita K, Shingu PH. 1983. An analysis of the ribbon formation process by the single roller rapid solidification technique. Trans. Jpn. Inst. Metals 24:529-36
67. Takeshita K, Shingu PH. 1986a. An analysis of the melt puddle formation in the single roller chill block casting. Trans. Japan Inst. Metals 27(2):141-48
68. Takeshita K, Shingu PH. 1986b. Thermal contact during the cooling by the single roller chill block casting. Trans. Japan Inst. Metals 27(6):454-62
69. Turnbull D. 1983. Thermodynamics and kinetics of laser-induced structure changes. In Physical Processes in Laser-Materials Interactions, ed. M. Bertollotti, pp. 117-42. New York: Plenum
70. Vogt E, Frommeyer G. 1987. Solidification parameters and microstructures of rapidly solidified Fe-Si and Fe-C melt spun ribbons. Zeitsch. Metallkde. 78(4):262-67
71. Wang GX, Matthys EF. 1991. Modelling of rapid solidification by melt spinning: effect of heat transfer in the cooling substrate. Mater. Sci. Eng. A136:85-97
72. Yu H. 1987. A fluid mechanics model of the planar flow melt spinning process under low Reynolds number conditions. Met. Trans. B 18B:557-63
73. Zielinski PG, Ast DG. 1983. Turbulent flow in chillblock casting. Scripta Metall. 17:291-94