Convection Heat and Mass Transfer in Alloy Solidification

Advances in Heat Transfer

Volumn 28, Issue C, 1996, Pages 231-338

  Prescott, Patrick J ^a   Incropera, Frank P ^b  

^a The Pennsylvania State University   (United States)

^b PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000450311     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(08)70142-4     Document Type: Article

References (202)

1. Cole G.S., and Boiling G.F. The importance of natural convection in casting. Trans. Metall. Soc. AIME 233 (1965) 1568-1572
2. Flemings M.C., and Nereo G.E. Macrosegregation: Part I. Trans. Metall. Soc. AIME 239 (1967) 1449-1461
3. Flemings M.C., Mehrabian R., and Nereo G.E. Macrosegregation: Part II. Trans. Metall. Soc. AIME 242 (1968) 41-49
4. Flemings M.C., and Nereo G.E. Macrosegregation: Part III. Trans. Metall. Soc. AIME 242 (1968) 50-55
5. Mehrabian R., Keane M., and Flemings M.C. Interdendritic fluid flow and macrosegregation; influence of gravity. Metall. Trans. 1 (1970) 1209-1220
6. Mehrabian R., Keane M., and Flemings M.C. Experiments on macrosegregation and freckle formation. Metall. Trans. 1 (1970) 3238-3241
7. Flemings M.C. Solidification processing. Metall. Trans. 5 (1974) 2121-2134
8. Szekely J. The smart way to make materials. Technol. Rev. 96 4 (1993) 36-44
9. Gebhart B., Jaluria Y., Mahajan R.L., and Sammakia B. Buoyancy-Induced Flows and Transport (1988), Hemisphere Publishing, New York
10. Turner J.S. Double-diffusive phenomena. Annu. Rev. Fluid Mech. 6 (1974) 37-56
11. Thompson M.E., and Szekely J. Mathematical and physical modelling of double-diffusive convection of aqueous solutions crystallizing at a vertical wall. J. Fluid Mech. 187 (1988) 409-433
12. Beckermann C., and Viskanta R. Double-diffusive convection during dendritic solidification of a binary mixture. PhysicoChem. Hydrodyn. 10 (1988) 195-213
13. Christenson M.S., and Incropera F.P. Solidification of an aqueous ammonium chloride solution in a rectangular cavity. I. Experimental study. Int. J. Heat Mass Transfer 32 (1989) 47-68
14. Thompson M.E., and Szekely J. Density stratification due to counterbuoyant flow along a vertical crystallization front. Int. J. Heat Mass Transfer 32 (1989) 1021-1036
15. Giamei A.F., and Kear B.H. On the nature of freckles in nickel base superalloys. Metall. Trans. 1 (1970) 2185-2192
16. Copley S.M., Giamei A.F., Johnson S.M., and Hornbecker M.F. The origin of freckles in unidirectionally solidified castings. Metall. Trans. 1 (1970) 2193-2204
17. Magirl C.S., and Incropera F.P. Flow and morphological conditions associated with unidirectional solidification of aqueous ammonium chloride. J. Heat Transfer 115 (1993) 1036-1043
18. Magirl, C.S., and Incropera, F.P. (1993). Flow and Morphological Conditions Associated with the Directional Solidification of Aqueous Ammonium Chloride, DOE/ER/13759-6. School of Mechanical Engineering, Purdue University, West Lafayette, IN.
19. Xu D., and Li Q. Gravity- and solidification-shrinkage-induced liquid flow in a horizontally solidified alloy ingot. Numer. Heat Transfer, A 20 (1991) 203-221
20. Krane M.J.M., and Incropera F.P. Analysis of the effect of shrinkage on macrosegregation in alloy solidification. Metall. Mater. Trans., A 26A (1996) 2329 2233, (1995)
21. Piwonka T.S., and Flemings M.C. Pore formation in solidification. Trans. Metall. Soc. AIME 236 (1966) 1157-1166
22. Poirier D.R., Yeum K., and Maples A.L. A thermodynamic prediction for microporosity formation in aluminum-rich alloys. Metall. Trans., A 18A (1987) 1979-1987
23. Cole G.S., and Bolling G.F. Augmented natural convection and equiaxed grain structure in casting. Trans. Metall. Soc. AIME 236 (1966) 1366-1368
24. Vives C., and Perry C. Effects of electromagnetic stirring during the controlled solidification of tin. Int. J. Heat Mass Transfer 29 (1986) 21-33
25. Vives, C. (1986). Effects of natural, forced and damped convections during the solidification of a pure metal. Proc. Int. Heat Transfer Conf., 8th, Vol. 4, pp. 1761-1766, 1986.
26. Vives C., and Perry C. Effects of magnetically damped convection during the controlled solidification of metals and alloys. Int. J. Heat Mass Transfer 30 (1987) 479-496
27. Stewart M.J., and Weinberg F. Fluid flow in liquid metals: 1. Theoretical analysis. J. Cryst. Growth 12 (1971) 217-227
28. Stewart M.J., and Weinberg F. Fluid flow in liquid metals: 2. Experimental observations. J. Cryst. Growth 12 (1971) 227-238
29. Wolff F., Beckermann C., and Viskanta R. Natural convection of liquid metals in vertical cavities. Exp. Therm. Fluid Sci. 1 (1988) 83-91
30. Szekely J., and Chhabra P.S. The effect of natural convection on the shape and movement of the melt-solid interface in the controlled solidification of lead. Metall. Trans. 1 (1970) 1195-1203
31. Szekely J., and Stanek V. Natural convection transients and their effects in unidirectional solidification. Metall. Trans. 1 (1970) 2243-2251
32. Szekely J., and Todd M.R. Natural convection in a rectangular cavity transient behavior and two phase systems in laminar flow. Int. J. Heat Mass Transfer 14 (1971) 467-482
33. Sparrow E.M., Patankar S.V., and Ramadhyani S. Analysis of melting in the prescence of natural convection in the melt region. J. Heat Transfer 99 (1977) 520-526
34. Ramachandran N., Gupta J.P., and Jaluria Y. Two-dimensional solidification with natural convection in the melt and convective and radiative boundary conditions. Numer. Heat Transfer 4 (1981) 469-484
35. Ramachandran N., Gupta J.P., and Jaluria Y. Thermal and fluid flow effects during solidification in a rectangular enclosure. Int. J. Heat Mass Transfer 25 (1982) 187-194
36. Kou S., Poirier D.R., and Flemings M.C. Macrosegregation in rotated remelted ingots. Metall. Trans., B 9B (1978) 711-719
37. Fujii T., Poirier D.R., and Flemings M.C. Macrosegregation in a multicomponent low alloy steel. Metall. Trans., B 10B (1979) 331-339
38. Szekely J., and Jassal A.S. An experimental and analytical study of the solidification of a binary dendritic system. Metall. Trans., B 9B (1978) 389-398
39. Ridder S.D., Kou S., and Mehrabian R. Effect of fluid flow on macrosegregation in axi-symmetric ingots. Metall, Trans., B 12B (1981) 435-447
40. Prantil V.C., and Dawson P.R. Application of a mixture theory to continuous casting. HTD [Publ.] (Am. Soc. Mech. Eng.) 29 (1983) 47-54
41. Hills R.N., Loper D.E., and Roberts P.H. A thermodynamically consistent model of a mushy zone. Q.J. Mech. Appl. Math. 36 (1983) 505-539
42. Bennon W.D., and Incropera F.P. A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems. II. Application to solidification in a rectangular cavity. Int. J. Heat Mass Transfer 30 (1987) 2171-2187
43. Bennon W.D., and Incropera F.P. A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems. I. Model formulation. Int. J. Heat Mass Transfer 30 (1987) 2161-2170
44. Bennon W.D., and Incropera F.P. Numerical analysis of binary solid-liquid phase change using a continuum model. Numer. Heat Transfer 13 (1988) 277-296
45. Prescott P.J., Incropera F.P., and Bennon W.D. Modeling of dendritic solidification systems: Reassessment of the continuum momentum equation. Int. J. Heat Mass Transfer 34 (1991) 2351-2359
46. Voller V.R., and Prakash C. A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int. J. Heat Mass Transfer 30 (1987) 1709-1719
47. Voller V.R., Brent A.D., and Prakash C. The modelling of heat, mass and solute transport in solidification systems. Int. J. Heat Mass Transfer 32 (1989) 1718-1731
48. Prakash C. Two-phase model for binary solid-liquid phase change. Part I: Governing equations. Numer. Heat Transfer, B 18 (1990) 131-145
49. Ni J., and Beckermann C. A volume-averaged two-phase model for transport phenomena during solidification. Metall. Trans., B 22B (1991) 349-361
50. Rappaz M. Modeling of microstructure formation in solidification processes. Int. Mater. Rev. 34 (1989) 93-123
51. Wang C.Y., and Beckermann C. Single- vs dual-scale volume averaging for heterogeneous multiphase systems. Int. J. Multiphase Flow 19 (1993) 397-407
52. Ni J., and Incropera F.P. Extension of the continuum model for transport phenomena occurring during metal alloy solidification. I. The conservation equations. Int. J. Heat Mass Transfer 38 (1995) 1271-1284
53. Ni J., and Incropera F.P. Extension of the continuum model for transport phenomena occurring during metal alloy solidification. II. Microscopic considerations. Int. J. Heat Mass Transfer 38 (1995) 1285-1296
54. Kececioglu I., and Rubinsky B. A continuum model for the propagation of discrete phase-change fronts in porous media in the presence of coupled heat flow, fluid flow and species transport processes. Int. J. Heat Mass Transfer 32 (1989) 1111-1130
55. Ganesan S., and Poirier D.R. Conservation of mass and momentum for the flow of interdendritic liquid during solidification. Metall. Trans., B 21B (1990) 173-181
56. Poirier D.R., Nandapurkar P.J., and Ganesan S. The energy and solute conservation equations for dendritic solidification. Metall. Trans., B 22B (1991) 889-900
57. Amberg G. Computation of macrosegregation in an iron-carbon cast. Int. J. Heat Mass Transfer 34 (1991) 217-227
58. Chiang K.C., and Tsai H.L. Shrinkage-induced fluid flow and domain change in two-dimensional alloy solidification. Int. J. Heat Mass Transfer 35 (1992) 1763-1770
59. Xu D., and Li Q. Numerical method for solution of strongly coupled binary alloy solidification problems. Numer. Heat Transfer, A 20 (1991) 181-201
60. Prescott P.J., and Incropera F.P. Numerical simulation of a solidifying Pb-Sn alloy: The effects of cooling rate on thermosolutal convection and macrosegregation. Metall. Trans., B 22B (1991) 529-540
61. Prescott P.J., Incropera F.P., and Gaskell D.R. The effects of undercooling, recalescence and solid transport on the solidification of binary metal alloys. HTD [Publ.] (Am. Soc. Mech. Eng.) 196 (1992) 31-39
62. Hassanizadeh M., and Gray W.G. General conservation equations for multiphase systems: 1. Averaging procedure. Adv. Water Resour. 2 (1979) 131-144
63. Hassanizadeh M., and Gray W.G. General conservation equations for multiphase systems: 2. Mass, momenta, energy, and entropy equations. Adv. Water Resour. 2 (1979) 191-203
64. Patankar S.V. Numerical Heat Transfer and Fluid Flow (1980), McGraw-Hill, New York
65. Zeng X., and Faghri A. Temperature-transforming model for binary solid-liquid phase-change problems. Part I: Mathematical modeling and numerical methodology. Numer. Heat Transfer, B 25 (1994) 467-480
66. Nandapurkar P.J., Poirier D.R., and Heinrich J.C. Momentum equation for dendritic solidification. Numer. Heat Transfer, A 19 (1991) 297-311
67. Drew A.A. Mathematical modeling of two-phase flow. Annu. Rev. Fluid Mech. 15 (1983) 261-291
68. Kurz W., and Fisher D.J. Fundamentals of Solidification. 3rd Ed. (1989), Trans Tech Publications, Brookfield, VT
69. Rappaz M., and Voller V. Modeling of micro-macrosegregation in solidification processes. Metall. Trans., A 21A (1990) 749-753
70. Shahani H., Amberg G., and Fredriksson H. On the formation of macrosegregations in unidirectional solidified Sn-Pb and Pb-Sn alloys. Metall. Trans., A 23A (1992) 2301-2311
71. Schneider M.C., and Beckermann C. Simulation of the solidification of a lead-tin alloy with consideration of microsegregation and contraction driven flow. HTD [Publ.] (Am. Soc. Mech. Eng.) 284 (1994) 43-58
72. Felicelli S.D., Heinrich J.C., and Poirier D.R. Numerical model for dendritic solidification of binary alloys. Numer. Heat Transfer, B 23 (1993) 461-481
73. Sundarraj S., and Voller V.R. A dual scale model of segregation phenomena. HTD [Publ.] (Am. Soc. Mech. Eng.) 284 (1994) 29-42
74. Sundarraj S., and Voller V. Effect of macro scale phenomena on microsegregation. Int. Commun. Heat Mass Transfer 21 (1994) 189-197
75. Voller V.R., and Sundarraj S. Modeling of microsegregation. Mater. Sci. Technol. 9 (1993) 474-481
76. Mo A. An internal variable description of solidification suitable for macrosegregation modeling. Metall. Mater. Trans., B 25B (1994) 597-605
77. Thevoz P., Desbiolles J.L., and Rappaz M. Modeling of equiaxed microstructure formation in casting. Metall. Trans., A 20A (1989) 311-322
78. Stefanescu D.M., Upadhya G., and Bandyopadhyay D. Heat transfersolidification kinetics modeling of solidification of castings. Metall. Trans., A 21A (1990) 997-1005
79. Rappaz M., and Gandin C.-A. Probabilistic modelling of microstructure formation in solidification processes. Acta Metall. Mater. 41 (1993) 345-360
80. Rappaz M., and Gandin C. Stochastic modeling of grain structure formation in solidification processes. MRS Bull. 19 (1994) 20-24
81. Beckermann, C., and Ni, J. (1992). Modeling of equiaxed solidification with convection. Proc. Int. Conf. Transp. Phenom. Process., 1st, Honolulu, Hawaii, 1992.
82. Beckermann C., and Viskanta R. Mathematical modeling of transport phenomena during alloy solidification. App. Mech. Rev. 46 (1993) 1-27
83. Wang C.Y., and Beckermann C. A unified solute diffusion model for columnar and equiaxed dendritic alloy solidification. Mater. Sci. Eng., A 171 (1993) 199-211
84. Wang C.Y., and Beckermann C. A multiphase solute diffusion model for dendritic alloy solidification. Metall. Trans., A 24A (1993) 2787-2802
85. Wang C.Y., and Beckermann C. Prediction of columnar to equiaxed transition during diffusion-controlled dendritic alloy solidification. Metall. Mater. Trans., A 25A (1994) 1081-1093
86. Beckermann C., and Wang C.Y. Incorporating interfacial phenomena in solidification models. JOM, J. Metals 46 (1994) 42-47
87. Asai S., and Muchi I. Theoretical analysis and model experiments on the formation mechanism of channel-type segregation. Trans. Iron Steel Inst. Jpn. 18 (1978) 90-98
88. Bird R.B., Stewart W.E., and Lightfoot E.N. Transport Phenomena (1960), Wiley, New York
89. West R. On the permeability of the two-phase zone during solidification of alloys. Metall. Trans., A 16A (1985) 693
90. Nasser-Rafi R., Deshmukh R., and Poirier D.R. Flow of interdendritic liquid and permeability in Pb-20 wt pet Sn alloys. Metall. Trans., A 16A (1985) 2263-2271
91. Poirier D.R. Permeability for flow of interdendritic liquid in columnar-dendritic alloys. Metall. Trans., B 18B (1987) 245-255
92. Poirier D.R., and Ocansey P. Permeability for flow of liquid through equiaxial mushy zones. Mat. Sci. Eng., A 171 (1993) 231-240
93. Poirier D.R., and Heinrich J.C. Continuum model for predicting macrosegregation in dendritic alloys. Mater. Charact. 32 (1994) 287-298
94. Ganesan S., Chan C.L., and Poirier D.R. Permeability for flow parallel to primary dendrite arms. Mater. Sci. Eng., A 151 (1992) 97-105
95. Bhat M.S., Poirier D.R., Heinrich J.C., and Nagelhout D. Permeability normal to columnar dendrites at fraction liquid. Scr. Metall. Mater. 31 (1994) 339-344
96. Ahuja S., Beckermann C., Zakhem R., Weidman P.D., and de Groh II H.C. Drag coefficient of an equiaxed dendrite settling in an infinite medium. HTD [Publ.] (Am. Soc. Mech. Eng.) 218 (1992) 85-91
97. de Groh III H.C., Weidman P.D., Zakhem R., Ahuja S., and Beckermann C. Calculation of dendrite settling velocities using a porous envelope. Metall. Trans., B 24B (1993) 749-753
98. Wang C.Y., Ahuja S., Beckermann C., and de Groh II H.C. Multiparticle interfacial drag in equiaxed solidification. Metall. Mater. Trans., B 26B (1995) 111-119
99. Jackson K.A., and Hunt J.D. Transparent compounds that freeze like metals. Acta Metall. 13 (1965) 1212-1215
100. Jackson K.A., Hunt J.D., Uhlmann D.R., and Seward II T.P. On the origin of the equiaxed zone in castings. Trans. Metall. Soc. AIME 236 (1966) 149-158
101. Bennon W.D., and Incropera F.P. The evolution of macrosegregation in statically cast binary ingots. Metall. Trans., B 18B (1987) 611-616
102. Christenson M.S., Bennon W.D., and Incropera F.P. Solidification of an aqueous ammonium chloride solution in a rectangular cavity. II. Comparison of predicted and measured results. Int. J. Heat Mass Transfer 32 (1989) 69-79
103. Neilson, D.G. (1991). Unidirectional solidification of a binary model alloy and the effects of induced fluid motion. Ph.D. Thesis, Purdue University, West Lafayette, IN.
104. Beckermann, C. (1987). Melting and solidification of binary mixtures with doublediffusive convection in the melt. Ph.D. Thesis, Purdue University, West Lafayette, IN.
105. Zeng X., and Faghri A. Temperature-transforming model for binary solid-liquid phase-change problems. Part II: Numerical simulation. Numer. Heat Transfer, B 25 (1994) 481-500
106. Yoo H., and Viskanta R. Effect of anisotropic permeability on the transport process during solidification of a binary mixture. Int. J. Heat Mass Transfer 35 (1992) 2335-2346
107. Sample A.K., and Hellawell A. The effect of mold precession on channel and macro-segregation in ammonium chloride-water analog castings. Metall. Trans., B 13B (1982) 495-501
108. Sample A.K., and Hellawell A. The mechanisms of formation and prevention of channel segregation during alloy solidification. Metall. Trans., A 15A (1984) 2163-2173
109. McCay M.H., and McCay T.D. Experimental measurement of solutal layers in unidirectional solidification. J. Thermophys. Heat Transfer 2 (1988) 197-202
110. McCay T.D., McCay M.H., Lowry S.A., and Smith L.M. Convective instabilities during directional solidification. J. Thermophys. Heat Transfer 3 (1989) 345-350
111. Chen C.F., and Chen F. Experimental study of directional solidification of aqueous ammonium chloride solution. J. Fluid. Mech. 227 (1991) 567-586
112. Neilson D.G., and Incropera F.P. Unidirectional solidification of a binary alloy and the effects of induced fluid motion. Int. J. Heat Mass Transfer 34 (1991) 1717-1732
113. Neilson D.G., and Incropera F.P. Numerical study of the effects of transport phenomena on macrosegregation during unidirectional solidification of a binary substance. Waerme-Stoffuebertrag. 27 (1992) 1-10
114. Sarazin J.R., and Hellawell A. Channel formation in Pb-Sn, Pb-Sb, and Pb-Sn-Sb alloy ingots and comparison with the system NH4Cl-H2O. Metall. Trans., A 19A (1988) 1861-1871
115. Neilson D.G., and Incropera F.P. Three-dimensional considerations of unidirectional solidification in a binary mixture. Numer. Heat Transfer, A 23 (1993) 1-20
116. Tait S., and Jaupart C. Compositional convection in a reactive crystalline mush and melt differentiation. J. Geophys. Res. 97 (1992) 6735-6756
117. Chen F., Yang T.L., and Lu J.W. Influence of convection on solidification of binary solutions cooling from below. J. Appl. Phys. 74 (1993) 7531-7541
118. Hellawell A., Sarazin J.R., and Steube R.S. Channel convection in partly solidified systems. Philos. Trans. R. Soc. London, Ser. A 345 (1993) 507-544
119. McCay M.H., McCay T.D., and Hopkins J.A. The nature and influence of convection on the direction dendritic solidification of a metal alloy analog, NH4Cl, and H2O. Metall. Trans., B 24B (1993) 669-675
120. Worster M.G. Instabilities of the liquid and mushy regions during solidification of alloys. J. Fluid Mech. 237 (1992) 649-669
121. Amberg G., and Homsy G.M. Nonlinear analysis of buoyant convection in binary solidification with application to channel formation. J. Fluid Mech. 252 (1993) 79-98
122. Emms P.W., and Fowler A.C. Compositional convection in the solidification of binary alloys. J. Fluid Mech. 262 (1994) 111-139
123. Magirl, C.S., and Incropera, F.P. (1994). Multidirectional solidification of an aqueous ammonium chloride solution. Proc. Int. Heat Transfer Conf. 10th, 4, 79-84. Brighton, England, 1994.
124. Murakami K., and Okamoto T. Formation of equiaxed zone in castings. Met. Sci. 18 (1984) 103-111
125. Jang J., and Hellawell A. Use of NH4Cl-H2O analogue castings to model aspects of continuous casting. Part 1. Asymmetry in inclined molds. Ironmaking Steelmaking 18 (1991) 267-274
126. Jang J., and Hellawell A. Use of NH4Cl-H2O analogue castings to model aspects of continuous casting. Part 2. Columnar-equiaxed grain transition and crystal sedimentation rates. Ironmaking Steelmaking 18 (1991) 275-283
127. Steube R.S., and Hellawell A. An alternative approach to modeling the grain structure of castings. HTD [Publ.] (Am. Soc. Mech. Eng.) 218 (1992) 73-83
128. Bennon W.D., and Incropera F.P. Numerical simulation of binary solidification in a vertical channel with thermal and solutal mixed convection. Int. J. Heat Mass Transfer 31 (1988) 2147-2160
129. Incropera F.P., Engel A.H.H., and Bennon W.D. Numerical analysis of binary solid-liquid phase change with buoyancy and surface tension driven convection. Numer. Heat Transfer, A 16 (1989) 407-427
130. Engel A.H.H., and Incropera F.P. Solidification of a binary mixture in a square cavity with a free surface. Waerme-Stoffuebertrag. 24 (1989) 279-288
131. Neilson D.G., Incropera F.P., and Bennon W.D. Numerical simulation of solidification in a horizontal cylindrical annulus charged with an aqueous salt solution. Int. J. Heat Mass Transfer 33 (1990) 367-380
132. Bennon W.D., and Incropera F.P. An experimental investigation of binary solidification in a vertical channel with thermal and solutal mixed convection. J. Heat Transfer 111 (1989) 706-712
133. Christenson M.S., and Incropera F.P. Experiments on solidification of an aqueous sodium carbonate solution in a horizontal cylindrical annulus. J. Heat Transfer 111 (1989) 998-1005
134. Prescott P.J., and Incropera F.P. Convective transport phenomena and macrosegregation during solidification of a binary metal alloy. I. Numerical predictions. J. Heat Transfer 116 (1994) 735-741
135. Prescott, P.J. (1992). Convective transport phenomena during solidification of binary metal alloys and the effects of magnetic fields. Ph.D. Thesis, Purdue University, West Lafayette, IN.
136. Prescott P.J., Incropera F.P., and Gaskell D.R. Convective transport phenomena and macrosegregation during solidification of a binary metal alloy. II. Experiments and comparisons with numerical predictions. J. Heat Transfer 116 (1994) 742-749
137. Fisher K.M. The effects of fluid flow on the solidification of industrial castings and ingots. PhysicoChem. Hydrodyn. 2 (1981) 311-326
138. Heinrich J.C., Felicelli S., and Poirier D.R. Vertical solidification of dendritic binary alloys. Comput. Meth. Appl. Mech. Eng. 89 (1991) 435-461
139. Felicelli S.D., Heinrich J.C., and Poirier D.R. Simulation of freckles during vertical solidification of binary alloys. Metall. Trans., B 22B (1991) 847-859
140. Diao Q.Z., and Tsai H.L. Modeling of solute redistribution in the mushy zone during solidification of aluminum-copper alloys. Metall. Trans., A 24A (1993) 963-973
141. Diao Q.Z., and Tsai H.L. The formation of negative- and positive-segregated bands during solidification of aluminum-copper alloys. Int. J. Heat Mass Transfer 36 (1993) 4299-4305
142. Kato H., and Cahoon J.R. Inverse segregation in directionally solidified Al-Cu-Ti alloys with equiaxed grains. Metall. Trans., A 16A (1985) 579-587
143. Diao Q.Z., and Tsai H.L. Modeling of formation of under-riser macrosegregation during solidification of binary alloys. Metall. Mater. Trans., A 25A (1994) 1051-1062
144. Chiang K.C., and Tsai H.L. Interaction between shrinkage-induced fluid flow and natural convection during alloy solidification. Int. J. Heat Mass Transfer 35 (1992) 1771-1778
145. Chidiac S.E., Brimacombe J.K., and Samarasekera I.V. A new transient method for analysis of solidification in the continuous casting of materials. Appl. Sci. Res. 51 (1993) 573-579
146. Mo A. Mathematical modeling of surface segregation in aluminum DC casting caused by exudation. Int. J. Heat Mass Transfer 36 (1993) 4335-4340
147. Shamsi M.R.R.I., and Mehrotra S.P. A two-dimensional heat and fluid flow model of single-roll continuous casting process. Metall. Trans., B 24B (1993) 521-535
148. Janssen R.J.A., Bart G.C.J., Cornelissen M.C.M., and Rebenberg J.M. Macrosegregation in continuously cast steel billets. Appl. Sci. Res. 52 (1994) 21-35
149. Davidson P.A., and Flood S.C. Natural convection in an aluminum ingot: A mathematical model. Metall. Mater. Trans., B 25B (1994) 293-302
150. Ha M.Y., Kim K., Kim K.C., and Lee S.W. Transient analysis of thermo-fluid phenomena in twin-roll continuous casting. Int. J. Heat Mass Transfer 37 (1994) 2059-2068
151. Farouk B., Kim Y.G., and Apelian D. Numerical study on the solidification processes in a twin-belt caster. Numer. Heat Transfer, A 20 (1991) 375-393
152. Farouk B., Apelian D., and Kim Y.G. A numerical and experimental study of the solidification rate in a twin-belt caster. Metall. Trans., B 23B (1992) 477-492
153. Launder B.E., and Spalding D.B. The numerical computation of turbulent flows. Comput. Meth. Appl. Mech. Eng. 3 (1974) 269-289
154. Shyy W., Pang Y., Hunter G.B., Wei D.Y., and Chen M.-H. Modeling of turbulent transport and solidification during continuous ingot casting. Int. J. Heat Mass Transfer 35 (1992) 1229-1245
155. Flood S.C., Katgerman L., and Voller V.R. The calculation of macrosegregation and heat and fluid flows in D.C. casting of aluminum alloys. In: Rappaz M., Ozgu M.R., and Mahin K.W. (Eds). Modeling of Casting, Welding, and Advanced Solidification Processes V (1991), TMS, Warrendale, Pennsylvania 683-690
156. Nandapurkar P., Poirier D.R., Heinrich J.C., and Felicelli S. Thermosolutal convection during dendritic solidification of alloys: Part I. Linear stability analysis. Metall. Trans., B 20B (1989) 711-721
157. Heinrich J.C., Felicelli S., Nandapurkar P., and Poirier D.R. Thermosolutal convection during dendritic solidification of alloys: Part II. Nonlinear convection. Metall. Trans., B 20B (1989) 883-891
158. Petrakis D.N., Flemings M.C., and Poirier D.R. Some effects of forced convection on macrosegregation. In: Brody H.D., and Apelian D. (Eds). Modeling of Casting and Welding Processes (1981), Metallurgical Society of AIME, New York 285-312
159. Neilson D.G., and Incropera F.P. Effect of rotation on fluid motion and channel formation during unidirectional solidification of a binary alloy. Int. J. Heat Mass Transfer 36 (1993) 489-505
160. Neilson D.G., and Incropera F.P. Experimental study of unidirectional solidification of aqueous ammonium chloride in a cylindrical mold with and without rotation. Exp. Heat Transfer 6 (1993) 131-155
161. Magirl, C.S., and Incropera, F.P. (1995). Effect of mold oscillation on convection and macrosegregation for unidirectional solidification from below. Proc. ASME/JSME Therm. Eng. Jt. Conf., 4th, Lahaina, Hawaii, 1995.
162. Garimella S.V., McNulty J.P., and Schlitz L.Z. Formation and suppression of channels during upward solidification of a binary mixture. Metall. Mater. Trans., A 26A (1995) 971-981
163. Asai S. Birth and recent activities of electromagnetic processing of materials. ISIJ Int. 29 (1989) 981-992
164. Kolesnichenko A.F. Electromagnetic processes in liquid material in the USSR and East European countries. ISIJ Int. 30 (1990) 8-26
165. Hoshikawa K. Czochralski silicon crystal growth in the vertical magnetic field. Jpn. J. Appl. Phys. (Lett.) 21 (1982) L545-L547
166. Hoshikawa K., Kohda H., and Hirata H. Homogeneous dopant distribution of silicon crystal grown by vertical magnetic field-applied Czochralski metho. Jpn. J. Appl. Phys. (Lett.) 23 (1984) L37-L39
167. Hirata H., and Inoue N. Macroscopic axial dopant distribution in Czochralski silicon crystals grown in a vertical magnetic field. Jpn. J. Appl. Phys. 24 (1985) 1399-1403
168. Kim K.M., and Smetana P. Striations in CZ silicon crystals grown under various axial magnetic field strengths. J. Appl. Phys. 58 (1985) 2731-2735
169. Langlois W.E., and Lee K.-J. Czochralski crystal growth in an axial magnetic field: Effects of Joule heating. J. Cryst. Growth. 62 (1983) 481-486
170. Langlois W.E. Computer simulation of Czochralski melt convection in a magnetic field. J. Cryst. Growth 70 (1984) 73-77
171. Lee K.-J., Langlois W.E., and Kim K.M. Digital simulation of oxygen transfer and oxygen segregation in magnetic Czochralski growth of silicon. PhysicoChem. Hydrodyn. 5 (1984) 135-141
172. Oreper G.M., and Szekely J. The effect of an externally imposed magnetic field on buoyancy driven flow in a rectangular cavity. J. Cryst. Growth 64 (1983) 505-515
173. Oreper G.M., and Szekely J. The effect of a magnetic field on transport phenomena in a Bridgman-Stockbarger crystal growth. J. Cryst. Growth 67 (1984) 405-419
174. Organ A.E. Flow patterns in a magnetic Czochralski crystal growth system. J. Cryst. Growth 73 (1985) 571-582
175. Mihelcic M., and Wingerath K. Numerical simulations of the Czochralski bulk flow in an axial magnetic field: Effects on the flow and temperature oscillations in the melt. J. Cryst. Growth 71 (1985) 163-168
176. Kim K.M., and Langlois W.E. Computer simulation of boron transport in magnetic Czochralski growth of silicon. J. Electrochem. Soc. 133 (1986) 2586-2590
177. Boettinger W.J., Biancaniello F.S., and Coriell S.R. Solutal convection induced macrosegregation and the dendrite to composite transition in off-eutectic alloys. Metall. Trans., A 12A (1981) 321-327
178. Coriell S.R., Cordes M.R., Boettinger W.J., and Sekerka J. Convective and interfacial instabilities during unidirectional solidification of a binary alloy. J. Cryst. Growth. 49 (1980) 13-28
179. Prescott P.J., and Incropera F.P. Magnetically damped convection during solidification of a binary metal alloy. J. Heat Transfer 115 (1993) 302-310
180. Vives C., and Ricou R. Experimental study of continuous electromagnetic casting of aluminum alloys. Metall. Trans., B 16B (1985) 377-384
181. Ricou R., and Vives C. Local velocity and mass transfer measurements in molten metals using an incorporated magnet probe. Int. J. Heat Mass Transfer 25 (1982) 1579-1588
182. Meyer J.L., El-Kaddah N., Szekely J., Vives C., and Ricou R. A comprehensive study of the induced current, the electromagnetic force field, and the velocity field in a complex electromagnetically driven flow system. Metall. Trans., B 18B (1987) 529-538
183. Meyer J., Durand F., Ricou R., and Vives C. Steady flow of liquid aluminum in a rectangular-vertical ingot mold, thermally or electromagnetically activated. Metall. Trans., B 15B (1984) 471-478
184. Dubke M., Tacke K.-H., Spitzer K.-H., and Schwerdtfeger K. Flow fields in electromagnetic stirring of rectangular strands with linear inductors: Part I. Theory and experiments with cold models. Metall. Trans., B 19B (1988) 581-593
185. Li B.Q., Evans J.W., and Cook D.P. An improved mathematical model for electromagnetic casters and testing by a physical model. Metall. Trans., B 22B (1991) 121-134
186. Vives C. Elaboration of semisolid alloys by means of new electromagnetic rheocasting processes. Metall. Trans., B 23B (1992) 189-206
187. Vives C. Elaboration of metal matrix composites from thixotropic alloy slurries using a new magnetohydrodynamic caster. Metall. Trans., B 24B (1993) 493-510
188. Szekely J., and Nakanishi K. Stirring and its effects on aluminum deoxidation in the ASEA-SKF furnace: Part II. Mathematical representation of the turbulent flow field and of tracer dispersion. Metall. Trans., B 6B (1975) 245-256
189. Tarapore E.D., and Evans J.W. Fluid velocities in induction melting furnaces: Part I. Theory and laboratory experiments. Metall. Trans., B 7B (1976) 343-351
190. Szekely J., and Chang C.W. Turbulent electromagnetically driven flow in metals processing: Part I. Formation. Ironmaking Steelmaking 4 (1977) 190-195
191. El-Kaddah N., and Szekely J. The turbulent recirculating flow field in a coreless induction furnace, a comparison of theoretical predictions with measurements. J. Fluid Mech. 133 (1983) 37-46
192. Moros A., and Hunt J.C.R. Recirculating flows in the cross-section of a channel induction furnace. Int. J. Heat Mass Transfer 31 (1988) 1497-1515
193. Spitzer K.-H., Dubke M., and Schwerdtfeger K. Rotational electromagnetic stirring in continuous casting of round strands. Metall. Trans., B 17B (1986) 119-131
194. Dubke M., Tacke K.-H., Sptizer K.-H., and Schwerdtfeger K. Flow fields in electromagnetic stirring of rectangular strands with linear inductors: Part II. Computation of flow fields in billets, blooms and slabs of steel. Metall. Trans., B 19B (1988) 595-602
195. Sakane J., Li B.Q., and Evans J.W. Mathematical modeling of miniscus profile and melt flow in electromagnetic casters. Metall. Trans., B 19B (1988) 397-408
196. Meyer J.L., Szekely J., El-Kaddah N., Vives C., and Ricou R. Electromagnetic and fluid flow phenomena in a mercury model system of the electromagnetic casting of aluminum. Metall. Trans., B 18B (1987) 539-548
197. Ilegbusi O.J., and Szekely J. Mathematical modeling of the electromagnetic stirring of molten metal-solid suspensions. Trans. Iron Steel Inst. Jpn. 28 (1988) 97-103
198. Ilegbusi O.J., and Szekely J. Three-dimensional velocity fields for Newtonian and non-Newtonian melts produced by a rotating magnetic field. ISIJ Int. 29 (1989) 462-468
199. Ilegbusi O.J., and Szekely J. Mathematical representation of the velocity, temperature and solid fraction in an electromagnetically stirred solidifying melt. ISIJ Int. 30 (1990) 372-380
200. Prescott P.J., and Incropera F.P. The effect of turbulence on solidification of a binary metal alloy with electromagnetic stirring. HTD [Publ.] (Am. Soc. Mech. Eng.) 280 (1994) 59-69
201. Prescott P.J., and Incropera F.P. The effect of turbulence on solidification of a binary metal alloy with electromagnetic stirring. J. Heat Transfer 117 (1996) 716-724
202. Jones W.P., and Launder B.E. The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence. Int. J. Heat Transfer 16 (1973) 1119-1130