Thermal stresses in materials with temperature-dependent properties

Applied Mechanics Reviews

Volumn 44, Issue 9, 1991, Pages 383-397

  Noda, Naotake ^a  

^a SHIZUOKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000320027     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3119511     Document Type: Article

References (379)

1. Abbasi F and Fletcher AJ (1985a), Effects of viscous flow on generation of thermal stress and strain during quenching of steel plates, Mat Sci Tech 1, 770-779.
2. Abbasi F and Fletcher AJ (1985b), Effect of transformation plasticity on generation of thermal stress and strain in quenched steel plates, Mat Sci Tech 1, 830-837.
3. Aboudi J (1985), The effective thermomechanical behavior of inelastic fiber-reinforced materials, Int J Eng Sci 23(7), 773-787.
4. Aboudi J and Benveniste Y (1975), Uniaxial wave propagation in a nonlinear thermoviscoelastic medium with temperature dependent properties," IntJ Solids Struct 11, 725-740.
5. Adeniji-Fashola AA and Oyediran AA (1988), Thermal gradient effects on the vibration of prestressed rectangular plates, Acta Mech 74, 235-248.
6. Allen DH and Haisler WE (1981), A theory for analysis of thermo-plastic materials, Comput Struct 13, 129-135.
7. Allen FS and Fletcher AJ (1987), Effect of surface conditions on generation of stress and strain in quenched steel plates, Mat Sci Tech 3, 291-298.
8. Allen JM (1982), Effect of temperature dependent mechanical properties on thermal stress in cooled turbine blades, J Eng Power (ASME) 104(2), 349-353.
9. Anand L (1982), Constitutive equations for the rate-dependent deformation of metals at elevated temperatures, Mater Tech (ASME) 104(1), 12-17.
10. Anand L (1985), Constitutive equations for hot working of metals, Pit J Plast 1, 213-231.
11. A nail d L and Lush AM (1987), A plasticity theory for large deformations at high temperature and its application to hot working of metals, Interdiscip Issues Mat Process Manuf 1, 163-177.
12. Anderson CA and Bridwell RJ (1980), A finite element method for studying the transient non-linear thermal creep of geological structures, Int J Nuttier Anal Meth Geomech 4, 255-276.
13. Andersson BAB (1978), Thermal stresses in a submerged-arc welded joint considering phase transformations, J Eng Mat Tech (ASME) 100(4), 356-362.
14. Andersson B and Karlsson L (1981), Thermal stresses in large butt-welded plates, J Thermal Stresses 4(3/4), 491-500.
15. Aoki S, Kishimoto K, Matsumoto I, Tachihara M, and Sakata M (1981), J-integral in thermal stress field, Trans Japan Soc Mech Eng Ser A 47(415), 304-312.
16. Aoki S, Kishimoto K, and Sakata S (1982), Elastic-plastic analysis of crack in thermally-loaded structures, Eng Tract Mech 16(3), 405-413.
17. Argyris JH and Doltsinis J St (1981a), On the natural formulation and analysis of large deformation coupled thermomechanical problems, Cornput Meth Appl Mech Eng 25, 195-253.
18. Argyris JH, Vaz LE, and William KJ (1981b), Integrated finite-element analysis of coupled thermoviscoplastic problems, J Thermal Stresses 4(2), 121-153.
19. Argyris JH, Doltsinis J, St. Pimenta PM, and Wiistenberg H (1982a), Thermomechanical response of solids at high strains—natural approach, Cornput Meth Appl Mech Eng 32, 3-57.
20. Argyris JH, Szinimat J, and Wiliam KJ (1982b), Computational aspects of welding stress analysis, Comput Meth Appl Mech Eng 33, 635-666.
21. Ariyoshi T and Shigefuji H (1988), Effect of element partitioning and evaluation of mechanical property on the accuracy of thermal stress analysis accompanied with phase transformation, J Soc Mat Sci Japan 37(421), 1153-1159.
22. Ariyoshi T, Fukuda K, Yata H, and Sueliiro M (1988), Application of a kinematic transformation model to heat transfer and thermal stress analysis, J Soc Mat Sci Japan 37(421), 1146-1152.
23. Atiuri SN, Nakagaki M, Nishioka T, and Kuang ZB (1986), Crack-tip parameters and temperature rise in dynamic crack propagation, Eng Tract Mech 23(1), 167-182.
24. Babeshko ME and Terekhov RG (1987), Investigation of process of active and repeated loading of fiber reinforced material at elevated temperature, Proble/ny Proch (9), 73-76.
25. Babeshko ME, Galishin AZ, and Prokhorenko IV (1982), Investigation of the thermoelastic-plastic state of shells of revolution with creep strain taken into account, Prikl Mekh (Engl transl) 18(10), 887-890.
26. Bamberger M, Nadiv S, and Baikay GB (1977), Mathematical model for die solidification of high-carbon steel in continuous casting, Iron Steel Int 43-48.
27. Banas A, Hsu TR, and Sun NS (1987), Coupled diennoelastic-plastic stress analysis of solids by finite-element method, J Thermal Stresses 10(4), 319-344.
28. Bauer F, Bohm HJ, Fischer FD, and Rammerstorfer FG (1987), Finite element analysis of drastic shape changes of cylinders due to thermal cycling, Comput Struct 26(1/2), 263-274.
29. Baumjohann F (1986), Calculation of thermoplastic stresses of a reactor pressure vessel with cladding from stress-relief annealing up to a Uiermal shock, Nucl Eng Des 96, 323-335.
30. Benailal A and Cheikh AB (1987), Elasto-viscoplastic behavior of structural components under cyclic thermal and mechanical loadings: Experimental and numerical analyses, 9th Int Conf Struct Mech React Tech, vol L, 327-336.
31. Bodner SR and Partom Y (1975), Constitutive equations for elastic-viscoplastic strain-hardening materials, J Appl Mech (ASME) 42(2), 385-389.
32. Brickstad B and Nilsson F (1986), Dynamic analysis of crack growth and arrest in a pressure vessel subjected to thermal and pressure loading, Eng Fract Mech 23(1), 61-70.
33. Browning RV, Miller DG, and Anderson CA (1974), TSAAS: Finite element thermal and stress analysis of axisymmetric solids with orthotropic temperature-dependent material properties, Los Alamos Scientific Laboratory Report LA-5599-MS, 1-49.
34. Browning RV, Gurtin ME, Williams WO, (1989), A model for viscoplastic materials with temperature dependence, Int J Solids Struct 25(4), 441-457.
35. Brust FW and Nakagaki M (1987), Integral parameters for use in the presence of Uiermal gradients, Numer Meth Fract Mech 851-865.
36. Brust FW and Rybicki EF (1981), A computational model of backlay welding for controlling residual stresses in welded pipes, J Press Vessel Tech (ASME) 103(3), 226-232.
37. Bumett JA and Padovan J (1979), Residual stress fields in heat-treated case-hardened cylinders, J Thermal Stresses 2(2), 251-263.
38. Case WR Jr and Walston WH Jr (1977), A finite element technique for nondeterm instic thermal deformation analyses including temperature dependent material properties, Int J Numer Meth Eng 11, 915-932.
39. Cemocky EP and Krempl E (1980), A theory of thermoviscoplasticity based on infinitesimal total strain, Int J Solids Struct 16, 723-741.
40. Chaboche JL (1977), Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of metals, Bull Acad Polon Sci 25(1), 33-42.
41. Chang CI (1987), Thermal effects on polymer composites and metal matrix composites, Theor Appl Fract Mech 8, 49-57.
42. Chang HT and Allen DH (1988), Analysis of viscoplastic plates subjected to rapid external heating, in CollectTech Paper AIAA/ASMEIASCE/AHS29thStructDyn Mat Conf, Part 3, 1640-1647.
43. Chen JK, Sun CT, and Chang CI(1985), Failure analysis of a graphite/epoxy laminate subjected to combined Uiermal and mechanical loading, J Comp Mai 19, 408-423.
44. Chen PYP (1984), Thermoviscoelastic stresses in cylinders due to cooling down from high temperatures, J Thermal Stresses 7(2), 197-205.
45. Chen, PYP (1985), Thermoviscoelastic stress problems by the Lanczos-Chebyshev method, Nucl Eng Des 86(3), 297-303.
46. Cemocky EP and Krempl E (1980), A theory of Uiermoviscoplasticity based on infinitesimal total strain, Int J Solids Struct 16, 723-741.
47. Corsi F, Fabi A, Mane ini M, Cesari F, Taddia B, and Combescure A (1983), Structure behaviour of pipes subjected to cyclic axial temperature steps, Trans 7th Struct Mech in Reactor Tech E7/3, 1.
48. Cost TL (1980), Reliability analysis of thermally stressed viscoelasUc structures by Monte Carlo simulation, in Thermal stresses in severe environments, DPH Hasselman and RA Heller (eds), Plenum, New York, 431-445.
49. Cost TL and Heard JM (1978), Finite-element analysis of coupled thermoviscoelastic structures undergoing sustained periodic vibraüons, AIAA J 16(8), 795-799.
50. Cousin M, Bahbouhi A, Jullien JF, and Cordier G (1985), Thermal ratchet; Metal structures under mechanical and cyclic thermal loads, Rev Gen Therm 24, 605-609.
51. Crochet MJ and Denayer A (1980), Transient and residual thermovisco-elastic stresses in glass, J Appl Mech (ASME) 47(2), 254-260.
52. Crose JG, Holman RL, andPagano JN (1987), Validation of advanced composite thermal stress analysis methods, J Eng Mat Tech (ASME) 109(1), 40-46.
53. Cry NA and Teter RD (1973), Finite element elastic-plastic-creep analysis of two-dimensional continuum with temperature dependent material properties, Comput Struct 3, 849-863.
54. Czuck G, Mattheck C, Munz D, and Stamm H (1985), Crack growth under cyclic thermal shock loading, Nucl Eng Des 84, 189-199.
55. Dafermos CM (1982), Global smooth solutions to the initial-boundary value problem for the equations of one-dimensional nonlinear thermovisco-elasticity, S/AM J Math Anal 13(3), 397-408.
56. Denis S, Simon A, and Beck G (1982a), Estimation of the effect of stress/phase transformation interaction when calculating internal stress during martensitic quenching of steel, Trans ISIJ22, 504-513.
57. Denis S, Simon A, and Beck G (1982b), Berücksichtigung des Werkstoffverhaltens eins Staliles mit Martensitumwandlung bei der Berechnung von Eigenspannungen Während des Abschreckvorganges, Harterei-TechMit 37(1), 18-28.
58. Dootson M, Sargent JP, Wostenholm GH, and Yates B (1980), Time- and temperature-dependent effects in the thermal expansion characteristics of carbon fibre-reinforced plastics, Composites 11, 73-78.
59. Durgaryan SM and Kaiatyan AP (1981), Axisymmetrically thermal stress problem in an orthotropic shell, MekhKompoz Mat (4), 651-656.
60. Eggert GM and Dawson PR (1986), Assessment of a theraioviscoplastic model of upset welding by comparison to experiment, Int J Mech Sci 28(9), 563-589.
61. Ekel’chik VS, Ismailov VS, Kostritskii SN, and Sborovskii AK (1977), Temperature dependence of viscoelastic properties of polymers under dynamic cond itions on the basis of the linear theory of thermovisco-elasticity, Mekh Polim (Engl transl) 13(5), 771-773.
62. El’Karamani AM (1978), Stress concentration in a medium with temperature-dependent properties, Prikl Mekh (Engl transl) 14(3), 284-290.
63. Elattary MA, Cozzarelli FA, and Shaw RP (1988), Stress intensification in a viscoelastic plate on a Winkler foundation and under a large thermal gradient, Acta Mech 72, 189-203.
64. Eremin YuA (1987), Investigation of the temperature aftereffect by the method of strain separation, Prikl Mekh (Engl transl) 23(9), 873-878.
65. Fa-rong Y and Shang-li Wu (1985), Transient-temperature and residual stress fields in axisymmetric metal components after hardening, Mat Sci Tech 1, 851-856.
66. Flaggs DL and Crossman FW (1981), Analysis of the viscoelastic response of composite laminates during hygrothermal exposure, J Comp Mat 15, 21-40.
67. Fletcher AJ (1977), Prediction of thermal stresses in quenched plates of En30B(835M30) steel, Metal Tech 4(6), 307-316.
68. Fletcher AJ (1989), Thermal stress and strain generation in heat treatment, Elsevier Applied Science, London and New York.
69. Fletcher AJ and Lewis C (1985), Effect of free edge on thermal stresses in quenched steel plates, Mat Sci Tech 1, 780-785.
70. Fletcher AJ and Price RF (1981), Generation of thermal stress and strain during quenching of low-alloy steel plates, Metals Tech 8, 427-446.
71. Fletcher AJ and Soomro AB (1986a), The effect of stress relaxation rate on the generation of thermal stress during quenching, Mat Sci Eng 82, 101-115.
72. Fletcher AJ and Soomro AB (1986b), The effect of plate thickness on the generation of thermal stress and strain in quenched steels of high hardenability, Mat Tech 57(8), 402-408.
73. Fletcher AJ and Soomro AB (1986c), Effect of transformation temperature range on generation of thermal stress and strain during quenching, Mat Sei Tech (2), 714-719.
74. Fletcher AJ and Soomro AJ (1987), The generation of thermal stress and strain during the quenching of steel plates in polyalkylene glycol, Mat Sci Eng 91, 153-160.
75. Foeken RJ (1985), Numerical analyses of reinforced concrete structures at high temperatures including cracking, plasticity and creep, Numer Methods Thermal ProblemsPsitl, 1127-1138.
76. Freudenthal AM (1954), Effect of rheological behavior on thermal stresses, J Appl Phys 25(9), 1110-1117.
77. Friedman E (1975), Thermomechanicai analysis of the welding process using the finite element method, I Pressure Vessel Tech (ASME) 97(3), 206-213.
78. Frutiger RL and Woo TC (1979), A thermoviscoelastic analysis for circular plates of thermorheologicaliy simple materials, J Thermal Stresses 2(1), 45-60.
79. Fuchs E A, Hughett P, and MacMillan DC (1988), Quantitative infrared thermography for measurement of temperature-dependent material properties, Exp Tech 12(9), 18-21.
80. Fujita Y and Nomoto T (1971), Studies on thermal elastic-plastic problems, J Soc Naval Architects Japan 130, 183-191.
81. Fukumoto M, Torii K, and Okane I (1987), Thermal stress analysis in ceramics-metal solid state bonding process, Trans Japan Soc Mech Eng Ser C 53(496), 2724-2728.
82. Galazyuk VA and Kolyano YYu (1986), Dynamic thermoelasticity in a solid with temperature dependency of the coefficient of thermal expansion, Problemy Proch 12, 8-13.
83. Galiev ShU and Zhurakhovskii SV (1984), Fracture of multilayered plates in thermoviscoeiastoplastic waves, Problemy Proch (Engl transl) 11, 1542-1549.
84. Galishin AZ (1984a), Axisymmetric thermoelastic-plastic stress-strain state of shells of revolution with a branched meridian, Prikl Mekh (Engl transl) 20(1), 63-67.
85. Galishin AZ (1984b), Axisymmetric themioelastic-plastic stress-strain state of branched shells with simple loading processes, Prikl Mekh (Engl transl) 20(8), 717-721.
86. Gasanov AB, Iliyacov MX, and Kiiko IA (1987), Propagation of transient wave in a viscoelastic half space with a internal heat generation and with temperature dependent material properties, IzvAkad Nauk 1, 124-134.
87. Geiss M, Wolf L, Fischer K, and Blume H (1986), Results of probabilistic fracture mechanics analyses for pressurized thermal shock transients in the reactor pressure vessel of B1BUS-B, NuclEng Des 96, 395-402.
88. Gellyer MA and Parnas AL (1983), Numerical study of temperature and thermal stress due to heat treatment of metal, Inzh Fz Zh 44(2), 304-310.
89. Griffin OH Jr (1983), Three-dimensional curing stresses in symmetric cross-ply laminates with temperature-dependent properties, J Comp Mat 17, 449-463.
90. Griffis CA, Masumura RA, and Chang CI (1981), Thermal response of graphite epoxy composite subjected to rapid heating, J Comp Mat 15, 427-442.
91. Griffis CA, Chang CI, and Stonesifer FR (1985), Thermo-mechanical response of tension panels under intense rapid heating, Theor Appl Tract Mech 3, 41-48.
92. Gromov VG and Miroshnikov VP (1977), An exact solution of the dynamic coupled thermal viscoelastic problem, Prikl Mekh (Engl transl) 13(6), 596-598.
93. Gularte RC, Nemes JA, Stonesifer FR, and Chang Ci (1987), Failure of mechanically loaded laminated composites subjected to intense localized heating, Numer Methods Thermal Problems 5, part 2, 983-993.
94. Gularte RC, Nemes JA, Stonesifer FR, and Chang CI (1988), Failure of mechanically loaded laminated composites subjected to intense localized heating, Int J Numer Methods Eng 25, 561-570.
95. Gumenyuk BP (1985a), Dissipative heating of a viscoelastic piezoceramic ball with temperature-dependent properties under harmonic excitation, Prikl Mekh (Engl transl) 21(11), 1070-1075.
96. Gumenyuk BP (1985b), Step method in coupled dynamic problems of thermo-electro-viscoelasticity with harmonic deformation, Prikl Mekh (Engl transl) 21(7), 709-713.
97. Gumenyuk BP and Karnaukhov VG (1978), On the thermal instability in coupled dynamic thermoviscoelastic problems, Dopov Akad Nauk JJkr SSR Ser A (7), 609-613.
98. Gumenyuk BP and Karnaukhov VG (1980), Dynamic behavior of visco-elastic bodies under harmonic excitation, Prikl Mekh (Engl transl) 16(7), 623-628.
99. Gumenyuk BP, Karnaukhov VG, and Kozlov VI (1985), Numerical study of the tliermomechanical behavior of viscoelastic bodies in plane harmonic deformation, Prikl Mekh (Engl transl) 21(1), 8-12.
100. Gurtin ME and Murphy LF (1980), On optimal temperature paths for thermorheo-logically simple viscoelastic materials, Quart Appl Math 38(2), 179-189.
101. Harper BD (1985), Optimal cooling paths for a class of thermorheologicaliy complex viscoelastic materials, J Appl Mech (ASME) 52(3), 634-638.
102. Harper BD and Weitsman Y (1985), Characterization method for a class of thermorheologicaliy complex materials, JRheol 29(1), 49-66.
103. Hart EW (1976), Constitutive relations for nonelastic deformation of metals, J Eng Mat Tech (ASME) 98(3), 193-202.
104. Hashimoto S, Inoue T, and Yamada T (1978), Elastic-plastic analysis of residual stress and deformation due to quenching of metals, J Soc Mat Sci Japan 27(296), 422-426.
105. Hashin Z, Flumphreys EA, and Goering J (1987), Analysis of thermo-viscoelastic behavior of unidirectional fiber composites, Comp Sci Tech 29, 103-131.
106. Hata T (1979), Thermoelastic problem for a Griffith crack in a plate with temperature-dependent properties under a linear temperature distribution, J Thermal Stresses 2(3/4), 353-366.
107. Hata T (1980), The effect of temperature-dependent properties on the stress intensity factors around a crack in a strip with heat dissipation at both plane surfaces, Trans Japan Soc Mech Eng Ser A 46(412), 1369-1377.
108. Hata T (1981), Thermoelastic problem for a Griffith crack in a plate whose shear modulus is an exponential function of the temperature, ZAMM 61, 81-87.
109. Hata T (1982), Analysis of the stress intensity factor for a Griffith crack under constant pressure in a plate with temperature-dependent properties, Trans Japan Soc Mech Eng Ser A 48(426), 205-212.
110. Ilegemier GA and Moriand LW (1969), Stress waves in a temperature-dependent viscoelastic half-space subjected to impulsive electromagnetic radiation, AJAA J 7(1), 35-41.
111. Heinlein M, Mukherjee S, and Richmond O (1986), A boundary element method analysis of temperature fields and stresses during solidification, Acta Mech 59, 59-81.
112. Herakovich CT, Gavis JG Jr, and Mills JS (1980), Tliennal microcracking in Celion6000/PRM-15 graphite/polyimide, in Thermal stresses in severe environments, PPH Hasselman and RA Heller (eds), Plenum, New York, 649-664.
113. Hibbit FID and Mareal PV (1973), A numerical thermo-mechanical model for the welding and subsequent loading of a fabricated structure, Comput Struct 3(5), 1145-1174.
114. Hilton HH (1954), Thermal stresses in thick-walled cylinders exhibiting temperature-dependent viscoelastic properties of Kelvin type, Proc 2nd US National Cong Appl Mech (ASME) New York, 547-553.
115. Hufferd WL and Francis EC (1980), Thermoviscoelastic interaction effects in filled polymers, in Thermal stresses in severe environments, DPH Hasselman and RA Heller (eds), Plenum, New York, 475-489.
116. Hunter SC (1961), Tentative equations for the propagation of stress, strain and temperature fields in viscoelastic solids, J Mech Phys Solids 9(1), 39-51.
117. Hyer MW and Cooper DE (1988), Thermal stresses in composite tubes using complementary virtual work, J Thermal Stresses 11(2), 93-113.
118. Hyer MW, Rousseau CQ, and Tompkins SS (1988), Thermally induced twist in graphite-epoxy tubes, J Eng Mat Tech (ASME) 110(2), 83-88.
119. ignaccoio S, Cousin M, Jullien JF, and Waeckel N (1988), Interaction of mechanical and thermal stresses on the instability of cylindrical shells, Res Mech 24, 25-33.
120. Inoue T and Raniecki B (1978), Determination of thermal-hardening stress in steels by use of thermoplasticity theory, J Mech Phys Solids 26, 187-212.
121. Inoue T and Tanaka K (1973), Temperature dependent analysis of elastoplastic thermal stresses by Finite element method, Mem Fac Eng Kyoto Univ 35(1), 1-14.
122. Inoue T and Tanaka K (1975), An elastic-plastic stress analysis of quenching when considering a transformation, Int J Mech Sci 17, 361-367.
123. Inoue T and Wang Z (1985), Coupling between stress, temperature, and metallic structures during processes involving phase transformations, Mat Sci Tech 1, 845-850.
124. Inoue T and Wang ZG (1988), Thermal and mechanical fields in continuouscasting slab—a steady state analysis incorporating solidification, IngArch 58, 265-275.
125. Inoue T, Haraguchi K, and Kimura S (1976), Stress analysis during quenching and tempering, J Soc Mat Sci Japan 25(273), 521-526.
126. Inoue T, Nagaki S, and Kawate T (1980), Successive deformation of a viscoelastic-plastic tube subjected to internal pressure under temperature cycling, JThermal Stresses 3(2), 185-198.
127. Inoue T, Nagaki S, Kishino T, and Monkawa M (1981), Description of transformation kinetics, heat conduction and elastic-plastic stress in the course of quenching and tempering of some steels, Ing Arch 50, 315-327.
128. Ishikawa H (1977a), Transient thermoelastoplastic stress analysis for a hollow sphere using the incremental theory of plasticity, Int J Solids Struct 13, 645-655.
129. Ishikawa H (1977b), Transient thermoelastoplastic stress analysis for an infinite medium with a spherical cavity, Tram Japan Soc Mech Eng 43(373), 3238-3245.
130. Ishikawa H (1977c), Transient thermo-elastoplastic problem for a thick-walled tube with temperature-dependent properties, Trans Japan Soc Mech Eng 43(376), 4454-4462.
131. Ishikawa H (1978a), Thermoelastoplastic solution for a circular solid cylinder subjected to heating and cooling, J Thermal Stresses 1(2), 211-222.
132. Ishikawa H (1978b), Residual stresses in a hollow sphere subjected to transient thermal loading, Trans Japan Soc Mech Eng 44(382), 1857-1864.
133. Ishikawa H (1980), Relaxation of thermal stress in a circular solid cylinder from creep deformation, J Thermal Stresses 3(1), 9-20.
134. Ishikawa H (1981), Effect of the external load on the thermoelastoplastic creep deformation, J Appl Mech (ASME) 48(2), 429-431.
135. Ishikawa H and Hata K (1978), Residual stresses in an infinite medium with spherical cavity subjected to transient thermal loading, Trans Japan Soc Mech Eng 44(386), 3378-3385.
136. Ishikawa H and Hata K (1980), Thermoelastoplastic creep stress analysis for a thick-walled tube, Int J Solids Struct 16, 291-299.
137. Ishikawa H and Hata K (1981), Effect of the history of temperature on the thermoelastoplastic solution, J Thermal Stresses 4(1), 39-49.
138. Ishikawa II, Wake O, and Hata K (1981), Thermal ratcheting of a thick-walled tube, Trans Japan Soc Mech Engrs Ser A 47(424), 1331-1338.
139. Ishikawa H, Sugawara Y, and Hata K (1983), Thermoeiastoplastic stress analysis during phase transformations, J Thermal Stresses 6(2/4), 365-377.
140. Itoh Y, Nagata K, Yanuki T, and Mori T (1984), Transient thermal stresses and residual stresses of 13Cr cast steels during welding, J Japan Welding Soc 2(2), 348-354.
141. Iwamura Y andRybicki EF (1973), A transient elastic-plastic thermal stress analysis of flame forming, J Eng Industry (ASME) 95(1), 163-171.
142. Iwasaki Y, Hiroe T, and Igaral I (1987), An application of the viscoplasticity theory to the inelastic analysis at elevated temperature (on the deformation and lifetime analysis under time-varying temperature), Trans Japan Soc Mech Eng Ser A 53(493), 1838-1843.
143. Iwasaki R and Ishizaki T (1987), Study on inelastic analysis using the boundary element method (1st report, study on the boundary element 3-dimensional thermal elastic plastic analysis), Trans Japan Soc Mech Eng Ser A 53(495), 2066-2070.
144. Japan Society Mechanical Engineers (ed) (1980), The modulus of elasticity of metals and alloys, Japan Society of Mechanical Engineers.
145. Jeanmart P and Bouvaist J (1985), Finite element calculation and measurement of thermal stresses in quenched plates of high-strength 7075 aluminium alloy, Mat Sci Tech 1, 765-769.
146. Jekot T (1984), Nonlinear thermoelastic problems of homogeneous and isotropic media under great temperature gradients, Arch Mech 36(1), 33-47.
147. Jekot T (1986), Numerical analysis of thermal stresses in a nonlinear thermoelastic thick cylindrical shell and cube, J Thermal Stresses 9(1), 59-68.
148. Jekot T (1987), Constitutive equations of nonlinear anisotropic nonhomogencous thermoeiasticity, J Thermal Stresses 10(2), 101-112.
149. Johnsson A (1973), Temperature fields due to ihermomechanicai coupling in a compressible viscoelastic sphere, Acta Mech 17, 201-209.
150. Jones IW and Pierre-Louis E (1985), A linear thermoviscoelastic material model for solid rocket motor structural analyses, Comput Struct 21(1/2), 235-243.
151. Jonsson M, Karlsson L, and Lindgren L (1983), Thermal stresses and plate motion in butt-welding, 3rd hit Corf Numer Meih Thermal Problems (Seattle, WA), Pineridge Press, 270-279.
152. Jonsson M, Karlsson L, and Lindgren L (1985), Deformations and stresses in butt-welding of large plates with special reference to the mechanical material properties, J Eng Mater Tech (ASME) 107(4), 265-270.
153. Josefson BL (1982), Residual stresses and their redistribution during annealing of a girth-butt welded thin-walled pipe, J Press Vessel Tech (ASME) 104(3), 245-250.
154. Josefson BL (1983), Stress redistribution during annealing of a multi-pass butt-welded pipe, J Press Vessel Tech (ASME) 105(2), 165-170.
155. Kadotani K (1980), Mechanical properties of plastic composites under low temperature conditions, Composites 11, 81-93.
156. Kalam MA (1981), Modified Rayleigh-Ritz method in nonaxisymmetric thermoelastic analysis of an orthotropic cylinder, J Thermal Stresses 4(1), 31-38.
157. Kamichika R, Yada T, and Okamoto A (1974), Internal stresses in thick plates weld-overlaid with austenitic stainless steel (Report 2), Trans Japan Welding Soc 5(1), 22-31.
158. Kamiya N (1980), Finite thermoelastic deformation of sphere with temperature-dependentproperties. JApp/Mech (ASME) 47(2), 319-323.
159. Kamiya N and Fukui A (1982), Finite deflection and postbuckling behavior of heated rectangular plates with temperature-dependent properties, Nucl Eng Des 72, 415-420.
160. Kamiya N and Kameyama E (1980), On the effect of boundary conditions on finite deflections of heated annuli exhibiting temperature-dependent properties, Nucl Eng Des 61(2), 187-196.
161. Kamiya N and Kameyama E (1981), Temperature-dependent finite thermoelastic stress and deformation in a circular cylindrical coordinate system, Res Mech Lett 1, 283-288.
162. Kamiya N, Kameyama E, and Fukui A (1980), Axisymmetric finite deflections of heated flat plates exhibiting temperature-dependent mechanical and thermal properties, Res Rep Fac Eng Mie Univ 5, 31-48.
163. Kamtekar AG (1978), The calculation of welding residual stresses in thin steel plates, hit J Mech Sci 20, 207-227.
164. Karadeniz S and Ponter ARS (1984), The influence of transient thermal loading on the bree plate: a simplified method of analysis, Nucl Eng Des 80, 359-374.
165. Karnaukhov VG and Kirichok IF (1986), Thermomechanical theory of layered viscoelastic piezoelectric shells polarized on one coordinate direction, Prikl Mekh (Engl transl) 22(11), 1074-1079.
166. Karnaukhov VG and Kozlov VI (1986), Finite-element method of solving problems of thermoelectroviscoelasticity for solids of revolution under harmonic loading, Prikl Mekh (Engl transl) 22(7), 606-613.
167. Kawakami M and Shiojiri H (1985), Thermo-elastic-plastic analysis with a plate/shell element using ADINAT/ADINA, Comput Struct 21(1/2), 165-177.
168. Kim KT (1989), Thermoeiastoplastic expansion of a strain hardening hollow sphere, J Thermal Stresses 12, 107-123.
169. Kishino T, Nagaki S, and Inoue T (1979), On transformation kinetics, heat conduction and elastic-plastic stresses during quenching of steel, J Soc Mater Sci Japan 28(312), 861-867.
170. Kleiber M and König JA (1984), Incremental shakedown analysis in the case of thermal effects, Int J Numer Meth Eng 20, 1567-1573.
171. Klepaczko JR (1987), A practical stress-strain-strain rate-temperature constitutive relation of the power form, J Mech Working Tech 15, 143-165.
172. Knauss WG (1968), Uniaxial wave propagation in a viscoelastic material using measured material properties, J Appl Mech (ASME) 35(3), 449-453.
173. Knauss WG and Emri I (1987), Volume change and the nonlinearly thermo-viscoelastic constitution of polymers, Polym Eng Sci 27(1), 86-100.
174. Koizumi T and Taniwaki T (1965), Thermal stress in a solid circular cylinder exhibiting temperature-dependent properties, Trans Japan Soc Mech Eng 31(221), 9-15.
175. Kojiö M and Bathe KJ (1987a), Thermo-elastic-plastic and creep analysis of shell structures, Comput Struct 26(1/2), 135-143
176. Kojiö M and Bathe KJ (1987b), The “effective-stress-function” algorithm for thermo-elasto-plasticity and creep, Int J Numer Meth Eng 24, 1509-1532.
177. Kokini K (1986), Thermal shock of a cracked strip: effect of temperature-dependent material properties, Eng Fract Mech 25(2), 167-176.
178. König JA (1979), On the incremental collapse criterion accounting for temperature dependence of yield point stress, Arch Mech 31(3), 317-325.
179. Kozlov VI and Karnaukhov VG (1983), Finite-element method of studying the thermomechanical behavior of viscoelastic solids of revolution under cyclic loading, Prikl Mekh (Engl transl) 19(11), 960-964.
180. Krashchenko VP, Statsenko VE, and Rudnitskii NP (1984), Effect of the rigidity of testing machines on the obtained temperature dependences of the strength and ductility characteristics, Problemy Prochn (Engl transl) 16(9), 1309-1313.
181. Kravchenko BA, Gutman GN, Batrin LE, and Fokin VG (1980), Thermoplastic strengthening of a gas-turbine engine disk lock joint. Determination of the residual stresses, Problemy Prochn (Engl transl) (9), 1113-1116.
182. Kristiansson JO (1982), Thermal stress in the early stage of solidification of steel, J Thermal Stresses 5(3/4), 315-330.
183. Kristiansson JO (1984), Thermomechanical behavior of the solidifying shell within continuous-casting billet molds—a numerical approach, J Thermal Stresses 7(3/4), 209-226.
184. Kulak RF, Belytschko TB, Kennedy JM, and Schoeberle DF (1978), Finite element formulation for thermal stress analysis of thin reactor structures, Nucl Eng Des 49, 39-50.
185. Lavrenko AS, Olshanetski VE, and Dudnik GI (1987), Effect of properties of fiber composite materials with titanium matrix to thermal stress, Problemy Proch (8), 60-64.
186. Lee EH and Rogers TG (1965), On the generation of residual stresses in thermoviscoelastic bodies, J Appl Mech (ASME) 32(4), 874-880.
187. Lee TY (1979), Coupled thermomechanical effects in high solids propellant, AIAA J 17(9), 1015-1017.
188. Lehmann HI (1985), On a generalized constitutive law in thermo-plasticity taking into account different yield mechanisms, Acta Mech 57, 1-23.
189. Lehmann Th (1988), On the influence of the coupling between mechanical and thermal processesin inelastic bifuraction, Arch Mech 40(1), 81-96.
190. Lehmann Th and Blix U (1985a), On the coupled thermo-mechanical process in the necking problem, Int J Plast 1, 175-188.
191. Lehmann Th and Blix U (1985b), On the influence of the coupling of thermal and mechanical processes in the necking problem in uniaxial tension, J Thermal Stresses 8(1), 153-165.
192. Leshkovtsev VB and Pokrovskii AM (1988), Algorithm of solution of thenno-elastoviscoplastic problem taking into consideration of structural transformation by FEM, Izv Vyssh Uchebn Zaved Mashinostr (5), 12-16.
193. Lewis RW and Bass BR (1976), The determination of stresses and temperatures in cooling bodies by finite elements, J Heat Transfer (ASME) 98(3), 478-484.
194. Lin KY and Hwang IH (1988), Thermo-viscoelastic response of graphite/epoxy composites, J Eng Mater Tech (ASME) 110(2), 113-116.
195. Lindholm US (1987), Unified viscoplastic constitutive equations and their applications, Interdiscip Issues Mater Process Manuf 1, 77-93.
196. Lugt J and Huetink J (1986), Thermal mechanically coupled finite element analysis in metal-forming processes, Comput Meth Appl Mech Eng 54, 145-160.
197. Mack W and Gamer U (1988), Instationäre Wärmespannungen beim Abkühlen einer Elastisch-Plastischen Kungel, ZAMM 68(11), 539-545.
198. Makhnenko VI and Velikoivanenko EA (1975), Elastic-plastic strains in the heat affected zone in the butt welding of sheets, Automatic Welding (Engl transl) 28(4), 9-12.
199. Maneschy CE, Miyano Y, Shimbo M, and Woo TC (1986), Residual-stress analysis of an epoxy plate subjected to rapid cooling on both surfaces, Exp Mech 26(4), 306-312.
200. Marangoni RD and Basavanhally N (1982), Mechanical vibrations in thermo-rheologically simple viscoelastic beams and plates, Int J Solids Struct 18(11), 1007-1029.
201. Marchertas AH (1984), Thermo-mechanical analysis of concrete inLMFBR programs, Nucl Eng Des 82, 47-62.
202. McKnight RL and Sobel LH (1977), Finite element cyclic thermoplasticity analysis by the method of subvolumes, Comput Struct 7(2), 189-196.
203. Merzer A and Bodner SR (1979), Analytical formulation of a rate and temperature dependent stress-strain relation, J Eng Mater Tech (ASME) 101(2), 254-257.
204. Merzlyakov VA (1985), Thermoeiastoplastic axisymmetric stress-strain state of shells of revolution with allowance for torsion, Problemy Frock (Engl transl) 17(2), 256-261.
205. Miller AK (1976a), An inelastic constitutive model for monotonic, cyclic and creep deformation: Part I—Equations development and analytical procedures, J Eng Mater Tech (ASME) 98(2), 97-105.
206. Miller AK (1976b), An inelastic constitutive model for monotonic, cyclic and creep deformation: Part II—Application to type 304 stainless steel, J Eng Mater Tech (ASME) 98(2), 106-113.
207. Miller CJ, Millavec WA, and Kicher TP (1981), Thermal stress analysis of layered cylindrical shells, AIAA J 19(4), 523-530.
208. Mishra A and Prasad T (1985), Residual stresses due to a moving heat source, IntJ Mech Sci 27(9), 571-581.
209. Miskioglu I, Gryzagorides J, and Burger CP (1981), Material properties in thermalstress analysis, Exp Mech 21(8), 295-301.
210. Miyagawa M, Yada T, Koguchi H, and Honzawa T (1988), Reliability evaluation of joints ceramics and metal (1st report, consideration on thermo-elastic-plastic stress around the interface of joined dissimilar materials), Trans Japan Soc Mech Eng Ser A 54(507), 1949-1955.
211. Miyano Y, Shim bo M, and Kunio T (1982), Viscoelastic analysis of residual stress in quenched thermosetting resin beams, Exp Mech 22(8), 310-316.
212. Miyano Y, Shimbo M, and Kunio T (1984), Residual stresses and warp generated by one-sided quench of an epoxy-resin beam, Exp Mech 24, 75-80.
213. Miyano Y, Shimbo M, Sugimori S, and Kunio T (1988), Residual stress in thermoplastic resin beam due to thermoviscoelastic behavior, 6th Int Cong Exp Mech 1, 619-623.
214. Molinari A (1985), Thennoviscoplastic instability in simple shear, J Theor Appl Mech 4(5), 659-684.
215. Molinari A and Clifton RJ (1987), Analytical characterization of shear localization in thennoviscoplastic materials, J Appl Mech (ASME) 54(4), 806-812.
216. Monkawa M, Nagaki S, and Inoue T (1980), Analysis of structural and stress changes during quenching and low-temperature-tempering of steels, J Soc Mat Sci Japan 29(327), 1173-1179.
217. Morland LW and Lee EH (1960), Stress analysis for linear viscoelastic materials with temperature variation, Trans Soc Rheol 4, 233-263.
218. Mu X and Hu H (1988), A finite element elastic-plastic-creep analysis of materials with temperature dependent properties, Comput Struct 30(4), 953-956.
219. Mukherjee S (1973), Variational principles in dynamic thermovisco-elasticity, Int J Solids Struct 9, 1301-1316.
220. Mukherjee S (1974), Thermal response of a viscoelastic rod under cyclic loading, J Appl Mech (ASME) 41(1), 229-233.
221. Muki R and Sternberg E (1961), On transient thermal stresses in viscoelastic materials with temperature-dependent properties, J Appl Mech (ASME) 28(2), 193-207.
222. Muraki T, Bryan JJ, and Masubuchi K (1975a), Analysis of thermal stresses and metal movement during welding: part 1, analytical study, J Eng Mater Tech (ASME) 97(1), 81-84.
223. Muraki T, Bryan JJ, and Masubuchi K (1975b), Analysis of thermal stresses and metal movement during welding: part 2, comparison of experimental data and analytical results, J Eng Mater Tech (ASME) 97(1), 85-91.
224. Muscati A and Lee DJ (1984), Elastic-plastic finite element analysis of thermally loaded cracked structures, Int J Fracture 25, 227-246.
225. Nagaki S, Cui W, and Abe T (1988), Coupled thermo-deformation analysis of strain-rate dependent materials with work-hardening, Trans Japan Soc Mech Eng Ser A 54(499), 571-577.
226. Nair S, Pang E, and Dix RC (1982), Residual stress generation and relaxation in butt-welded pipes, J Press Vessel Tech (ASME) 104(3), 188-192.
227. Naim J and Zoller P(1985), Matrix solidification and the resulting residual thermal stresses in composites, J Mat Sci 20, 355-367.
228. Nakamura S, Miyano Y, Sugimori S, and Kaneda A (1987), Thermo-viscoelastic analysis of residual stress by cooling in a thermosetting resin/metai laminated beam, m Proc 1987 SEM Spring Conf Exp Mech 771-777.
229. Nakamura S, Miyano Y, Sugimori S, and Kaneda A (1988), Thermo-viscoelastic analysis of residual stresses in a thermosetting resin/metal laminated beam caused by cooling, JSME Int J Ser 1 31(1), 126-131.
230. Nedopekin FV, Belousov VV, and Solonar AE (1988), Mathematical model for thermoelastic stresses in a solidifying cast, Prom Teplotekh 10(1), 48-52.
231. Nicholson DW and Kiddy KC (1984), A large deformation plasticity model with rate sensitivity and thermal softening, J Eng Mater Tech (ASME) 106(4), 388-392.
232. Nickell RE and Hibbitt HD (1975), Thermal and mechanical analysis of welded structures, Nucl Eng Des 32, 110-120
233. Noda N (1986), Thermal stresses in materials with temperature-dependent properties, in Thermal stresses I, RB Hetnarski (ed), North-Holland, Amsterdam, 391-483.
234. Noda N and Daichyo Y (1987), Transient thermoelastic problem in a long circular cylinder with temperature dependent properties, Trans Japan Soc Mech Engrs Ser A 53(487), 559-565.
235. Nunziato JW and Walsh EK (1973a), Amplitude behavior of shock waves in a thermoviscoelastic solid, Int J Solids Struct 9, 1373-1383.
236. Nunziato JW and Walsh EK (1973b), Propagation of steady shock waves in non-linear thermoviscoelastic solids, J Mech Phys Solids 21, 317-335.
237. Nyuko H, Takeuti Y, and Noda N (1978), Stationary thermal stresses for a composite hollow sphere exhibiting temperature dependent properties, Trans Japan Soc Mech Eng 44(381), 1454-1460.
238. Ogirko IV (1987), Optimal temperature distribution on the surface of a structure taking into consideration of geometrical non-linearity and temperature dependent thermoelastic material properties, J Izv Akad Nauk SSSR Mekh Tverd Tala 4, 173-177.
239. Okamura K and Kawashima H (1988), Finite element analysis of thermal stress in heat treatment, Netsushiyori 28(3), 141-148.
240. Orisamolu IR and Singh MC (1989), Thermodynamically consistent set of explicit constitutive state equations for inelastic solids, J Thermal Stresses 12(3), 351-368.
241. Orlov VS (1987), Identifying governing relations of the linear theory of tlie-rmoviscoelasticity, Prikl Mekh (Engl transl) 23(5), 482-486.
242. Padovan J and Pai SS (1984), Quasi static solution algorithms for kinematically/materially nonlinear thermomechanical problems, J Thermal Stresses 7(3/4), 227-257.
243. Padovan J, Dougherty D, Hendricks R, Braun MJ, and Chung BTF (1984), High temperature thermomechanical analysis of ceramic coatings, J Thermal Stresses 7(1), 51-74.
244. Padovan J, Dougherty D, and Hendricks B (1986a), Inelastic high-temperaturc thermomechanical response of ceramic coated gas turbine seals, J Thermal Stresses 9(1), 31-43.
245. Padovan J, Padovan P, and Xiaru Y (1986b), Analysis of thennomechanical oxidation fields in thermal barrier coatings, J Thermal Stresses 9(3), 251-277.
246. Palmaers A, Etienne A, and Mignon J (1979), Calculation of mechanical and thermal stresses in continuously cast strands, Stahl Eisen 99(19), 1039-1050.
247. Papazoglou VJ and Masubuchi K (1982), Numerical analysis of thermal stresses during welding including phase transformation effects, J Press Vessel Tech (ASME) 104(3), 198-203.
248. Parkus H (1969), Thermal effects in viscoelastic structures, Proc 2nd Canadian Cong Appl Mech Univ Waterloo, 455-465.
249. Pavlychko VM (1986), Solution of three-dimensional problems of thermo-plasticity with simple loading processes, Problemy Proch (Engl transl) 18(1), 81-86.
250. Petrof RC and Gratch S (1964), Wave propagation in a viscoelastic material with temperature-dependent properties and thermomechanical coupling, J Appl Mech (ASME) 21(3), 423-429.
251. Pich VR (1981), On the material properties concerned with thermal stresses, VGB Kraftwerkstech 61(7), 593-610.
252. Piskun W (1985), Thermoelastoplastic stress state of a cylindrical vessel in the vicinity of an annular weld with allowance for loading history, Prikl Mekh (Engl transl) 21(5), 430-434.
253. Ponter ARS and Karadeniz S (1985a), An extended shakedown theory for structures that suffer cyclic thermal loading, part 1: theory, J Appl Mech (ASME) 52(4), 877-882.
254. Ponter ARS and Karadeniz S (1985b), An extended shakedown theory for structures that suffer cyclic thermal loading, part 2: applications, J Appl Mech (ASME) 52(4), 883-889.
255. Porksheyan VM (1984), Heating of thermoviscoelastic beams and circular plates during cyclic deformation, Prikl Mekh (Engl transl) 20(1), 89-95.
256. Posmolntsk YS and Manko VM (1986), Thermoelastoplasticity in a plate with temperature dependent material properties subjected to thermal shock, Izv Vyssh Uchebn Zaved Chern Metall (2), 98-101.
257. Price RF and Fletcher AJ (1980), Determination of surface heat-transfer coefficients during quenching of steel plates, Metals Tech 7(5), 203-211.
258. Protasov ID (1986), Linear thermoviscoelastic state equations of thermorheologic-ally simple materials, Dokl Akad Nauk SSSR 298(5), 1067-1070.
259. Puilaikin PA and Maksimov LY (1983), Analysis of stress and strain distribution in a vessel with temperature dependent material properties, Kuznechno-Shtampovchnov Proizvd (6), 16-17.
260. Rafalski P (1968), Variational principle for the problem of thermal stresses in bodies with temperature-dependent viscoelastic properties, Bull Acad Polon Sci 16(5), 205-210.
261. Rammerstorfer FG, Fischer DF, Mitter W, Bathe KJ, and Snyder MD (1981), On thermo-elastic-plastic analysis of heat-treatment processes including creep and phase changes, Comput Struct 13, 771-779.
262. Raniecki B (1985), Overlay model for determining thermal-hardening stresses in metallic solids, Mat Sci Tech 1, 857-862.
263. Raniecki B and Inoue T (1977), Kinetics of phase transformations and analysis of stresses due to quenching of steel, J Soc Mat Sci Japan 26(289), 935-940.
264. Rashid YR and Sharabi MN (1980), Strain-rate dependent plasticity in thermomechanical transient analysis, Nucl Eng Des 57, 41-48.
265. Rebelo N and Kobayashi S (1980), A coupled analysis of viscoplastic deformation and heat transfer—I, theoretical considerations, Int J Mech Sci 22, 699-705.
266. Rebelo N, Nakazawa S, Wertheimer TB, and Nagtegaal JC (1987), Coupled thermo-mechanical analysis. Numerical and computational issues, Interdiscip Issues Mater Process Manufl, 111-129.
267. Richmond O and Tien RH (1971), Theory of thermal stresses and air-gap formation during the early stages of solidification in a rectangular mold, J Mech Phys Solids 19, 273-284.
268. Riff R and Simitses GJ (1988), Thermo-elasto-viscoplastic analysis of problems in extension and shear, Comput Struct 29(2), 293-300.
269. Riff R, Carlson RL, andSimitses GJ (1987), Thermodynamically consistent constitutive equations for nonisothermal large-strain, elastoplastic, creep behavior, AIAA J 25(1), 114-122.
270. Ross DA and Berke L (1981), Temperature-dependent creep buckling of plates, J Thermal Stresses 4(2), 237-247
271. Rubin MB (1982), A thermoelastic-viscoplastic model with a rate-dependent yield strength, J Appl Mech (ASME) 49(2), 305-311.
272. Rybicki EF and McGuire PA (1981), A computational model for improving weld residual stresses in small diameter pipes by induction heating, J Press Vessel Tech (ASME) 103(3), 294-299.
273. Rybicki EF and McGuire PA (1982), The effects of induction heating conditions on controlling residual stresses in welded pipes, J Eng Mater Tech (ASME) 104(4), 267-273.
274. Rybicki EF and Stonesifer RB (1979), Computation of residual stresses due to multipass welds in piping systems, J Press Vessel Tech (ASME) 101(2), 149-154.
275. Rybicki EF, Schmueser DW, Stonesifer, RW, Groom JJ, and Mishler HW (1978), A finite-element model for residual stresses and deflections in girth-butt welded pipes, J Press Vessel Tech (ASME) 100(3), 256-262.
276. Sagar V and Payne DJ (1974), Elastic-plastic deformations of thick-walled circular cylinders under transient heating and combined axial tension and torsion loads, J Mech Phys Solids 22, 47-59.
277. Schapery RA (1964a), Application of thermodynamics to thermomechanical, fracture, and birefringent phenomena in viscoelastic media, J Appl Phys 35(5), 1451-1465.
278. Schapery RA (1964b), Effect of cyclic loading on the temperature in viscoelastic media with variable properties, AIAAJ 2(5), 827-835.
279. Schapery RA (1965), Thermomechanical behavior of viscoelastic media with variable properties subjected to cyclic loading, J Appl Mech (ASME) 32(9), 611-619.
280. Schapery RA (1969), On the characterization of nonlinear viscoelastic materials, Polymer Eng Sci 9(4), 295-310.
281. Schapery RA (1974), Viscoelastic behavior and analysis of composite materials, in Mechanics of composite materials, vol 2, GP Sendeckj (ed), Academic, New York, 85-167.
282. Schapery RA and Cantey DE (1966), Thermomechanical response studies of solid propellants subjected to cyclic and random loading, AIAA J 4(2), 255-264.
283. Schreyer ML, Kennedy JM, and Schoeberle DF (1983), Thermoviscoplastic analysis of first walls subjected to fusion power transients, J Press Vessel Tech (ASME) 105(1), 42-51.
284. Schroder R (1985), Influences on development of thermal and residual stresses in quenched steel cylinders of different dimensions, Mat Sci Tech 1, 754-764.
285. Schwarzl F and Staverman AJ (1952), Tim e-temperature dependence of linear viscoelastic behavior, J Appl Phys 23(8), 838-843.
286. Senchenkov IK (1980), Extremal principles of the theory of small thermoviscoelastic deformations superposed on fully established finite deformations, Prikl Mekh (Engl transl) 16(7), 574-581.
287. Senchenkov IK (1984), Dynamic behavior of a rod taking account of the temperature dependence of its material properties, Prikl Mekh (Engl transl) 20(2), 182-187.
288. Senchenkov IK (1985), Approximate statement of problems of nonlinear thermoviscoelasticity for harmonic actions, Prikl Mekh (Engl transl) 21(2), 188-195.
289. Senchenkov IK and Gumenyuk BP (1980), Thermomechanical behavior of a viscoelastic spring-bar with an amplitude-dependent modulus, Prikl Mekh (Engl transl) 16(5), 445-449.
290. Senchenkov IK, Karnaukhov VG, and Kozlov VI (1986a), Toward a theory of governing equations of nonlinear thermoviscoelasticity for periodic deformation, Prikl Mekh (Engl transl) 22(8), 783-789.
291. Senchenkov IK, Karnaukhov VG, Kozlov VI, and Chervinko OP, (1986b), Steady oscillations and dissipative heating of viscoelastic bodies with periodic loading, Prikl Mekh (Engl transl) 21(6), 538-544.
292. Senchenkov IK, Karnaukhov VG, Kozlov VI, and Chervinko OP (1986c), Simple deformation in a problem on vibrations and heating of nonlinear viscoelastic bodies, Prikl Mekh (Engl transl) 22(9), 878-885.
293. Senchenkov IK, Dryda VI, Kozlov VI, and Maznetsova AV (1987), Calculation of the thermomechanical behavior of systems with nonlinear viscoelastic vibration dampers during harmonic excitation, Prikl Mekh (Engl transl) 23(6), 590-596.
294. Sharifi P and Yates DN (1974), Nonlinear thermo-elastic-plastic and creep analysis by the finite-element method, AIAA J 12(9), 1210-1215.
295. Shevchenko Yu N (1985), Thermoviscoplasticity boundary problems with complex nonisothermal loading processes, Prikl Mekh (Engl transl) 21(4), 413-419.
296. Shevchenko Yu N and Merzlyakov VA (1988), Thermoelastoplastic non-axisymmetric deformation of shells of revolution, Prikl Mekh (Engl transl) 24(5), 469-477.
297. Shylyakhov SM and Syerbryakov AV (1988), The contact problem of thermoelasticity in a circular ring with temperature dependent material properties, Izv Vyssh Uchebn Zaved Mashinostr (8), 14-17.
298. Snyder MD and Bathe KJ (1981), A solution procedure for thermo-elastic-plastic and creep problems, Nucl Eng Des 64, 49-80.
299. Srinatha HR and Lewis RW (1981), A finite element method for thermoviscoelastic analysis of plane problems, Comput Meth Appl Mech Eng 25, 21-33.
300. Srinatha HR and Lewis RW (1982), A finite element formulation of uncoupled thermoviscoelastic response of plane problems for all admissible values of Poisson’s ratio, Int J Numer Methods Efig 18, 765-774.
301. Stanley P and Chau FS (1980), The effects of the temperature-dependence of properties on the thermal stresses in cylinders, in Thermal stresses in severe environments, PPH Hasselman and RA Heller (eds), Plenum, New York, 61-80.
302. Stokes VK and Nied HF (1986), Solid phase sheet forming of thermoplastics—part 1: Mechanical behavior of thermoplastics to yield, J Eng Mater Tech (ASME) 108(2), 107-112.
303. Suhara T (1918), Elasticity of steel strained by unequal heating, J Japan Soc Mech Eng 21(50), 25-63.
304. Sugano Y (1983), Analysis of transient thermal stresses in an orthotropic finite rectangular plate exhibiting temperature-dependent material properties by finite difference method, Trans Japan Soc Mech Eng Ser A 49(446), 1315-1323.
305. Sugano Y (1984a), Chi a finite difference method of plane thermoelastic problem in multiply-connected region exhibiting temperature dependences of material properties, Comput Tech Appl CTAC-83, 615-624.
306. Sugano Y (1984b), A general treatise of plane thermoelastic problem in multiply-connected region exhibiting temperature-dependent properties, ZAMM 64, 163-172.
307. Sugano Y (1984c), On a stress function method of a thermoelastic problem expressed in cylindrical coordinates in a multiply-connected region exhibiting temperature-dependent material properties, IngArch 54, 301-308.
308. Sugano Y (1984d), Asymmetric thermal stresses in a hollow circular cylinder having temperature-dependent material properties, Theor Appl Mech 32, 355-366.
309. Sugano Y and Maekawa T (1983), Transient thermal stresses in multiple-connected region exhibiting temperature dependences of material properties, Trans Japan Soc Mech Eng Ser A 49(444), 960-969.
310. Sugano Y and Maekawa T (1985), Transient thermal stresses in a perforated plate of variable thickness exhibiting temperature-dependent material properties, 'Trans Japan Soc Mech Eng Ser A 51(461), 63-71.
311. Sugawara Y, Ishikawa H, and Hata K (1982), Thermoelastoplastic behavior of an infinite solid circular cylinder of low carbon steel (stress due to heating and cooling passing through A sub 3 transformation temperature), Trans Japan Soc Mech Eng 48(433), 1209-1216.
312. Sugawara Y, Ishikawa H, and Hata K (1984a), Thermoelastoplastic creep stress analysis of high frequency induction hardening steel during tempering, Trans Japan Soc Mech Eng Ser A 50(452), 764-770.
313. Sugawara Y, Ishikawa H, and Hata K (1984b), Thermoelastoplastic stress analysis of high frequency (induction hardening steel), Trans Japan Soc Mech Eng 50(454), 1228-1235.
314. Sugawara Y, Kataoka K, and Ishikawa H (1987), Thermoelastoplastic stress analysis of interruptedly quenched steel, Trans Japan Soc Mech Eng Ser A 53(486), 334-338.
315. Sugimori S, Miyano Y, and Kunio T (1984), Photoviscoelastic analysis of thermal stress in quenched epoxy beam, Exp Mech 24, 150-156.
316. Takeuchi S and Ukai T (1987), Thermoelastoplasticity simulation of a large-scaled low-alloy steel shaft material (on the shape with a fillet), Trans Japan Soc Mech Eng Ser A 53(495), 2039-2043.
317. Takeuchi S and Ukai T (1988a), Thermoelastoplasticity simulation of a large-scaled low-alloy steel shaft material (2nd report, on the circumferentially grooved cylinder loaded in the two different coolings), Trans Japan Soc Mech Eng Ser A 54(499), 561-564.
318. Takeuchi S and Ukai T (1988b), Thermoelastoplasticity simulation of a large-scaled low alloy steel shaft material (3rd report, stresses near the boundary of the thermal load through local cooling), Trans Japan Soc Mech Eng Ser A 54(506), 1851-1854.
319. Takeuchi S, Onodera S, and Tomizuka S (1982), Temperature distribution and thermoelastoplastic stress of a large-scaled steel material at heating and cooling (1st report), Trans Japan Soc Mech Eng 48(429), 565-572.
320. Takeuti Y, Noda N, and Nyuko H (1976), Temperature dependence of dynamic moduli of elasticity and its application for thermal stress analysis of a composite hollow circular cylinder, Proc 2nd Int Conf Mechanical Behavior of Materials Boston, 1962-1966.
321. Tauchert TR (1976a), Thermal stresses in a spherical pressure vessel having temperature-dependent, transversely isotropic, elastic properties, Adv Eng Sci 2, 1-11.
322. Tauchert TR (1976b), Thermal stresses in an orthotropic cylinder with temperature-dependent elastic properties, Dev Theor Appl Mech 8, 201-212.
323. Taylor CM and Bill RC (1979), Thermal stresses in a plasma-sprayed ceramic gas path seal, J Aircraft 16(4), 239-246.
324. Taylor RL, Pister KS, and Goudreau GL (1970), Thermomechanical analysis of viscoelastic solids, Int J Numer Methods Eng 2, 45-59.
325. Thomas TJ, Nair S, and Garg VK (1983), Elasto-plastic stress analysis and fatigue life prediction of a freight car wheel under mechanical and cyclic thermal loads, Comput Struct 17(3), 313-320.
326. Tien RH and Richmond O (1982), Theory of maximum tensile stresses in the solidifying shell of a constrained rectangular casting, J Appl Mech (ASME) 49(3), 481-486.
327. Ting EC and Tuan JL (1973), Effect of cyclic internal pressure on the temperature distribution in a viscoelastic cylinder, Int JMech Sci 15(11), 861-871.
328. Tomar JS and Gupta AK (1984), Thermal effect on axisymmetric vibrations of an orthotropic circular plate of variable thickness, AIAA J 22(7), 1015-1017.
329. Tomar JS and Tiwari VS (1981), Effect of thermal gradient on frequencies of a circular plate of linearly varying thickness, J Non-Equilib Thermodyn 6, 115-122.
330. Tomita Y, Shindo A, and Chu M (1988), Localization of the plastic deformation in the plane strain tension block with strain rate and temperature sensitivity, J Japan Soc Tech Plast 29(331), 835-839.
331. Touloukian YS (1970), Thermophysical properties of matter, vol 1: Conductivity— metallic elements and alloys, IFI/Plenum, New York.
332. Touloukian YS (1973a), Thermophysical properties of matter, vol 4: Specific heat—metallic elements and alloys, M/Plenum, New York.
333. Touloukian YS (1973b), Thermophysical properties of matter, vol 10: Thermal diffusivity, IFI/Plenum, New York.
334. Touloukian YS (1975), Thermophysical properties of matter, vol 12: Thermal expansion—metallic elements and alloys, IFI/Plenum, New York.
335. Trostei R (1958), Stationäre Wärmespannungen mit Ternperaturabhangingen Stoffwerten, Ingenieur-Archiv 26, 416-434.
336. Tsai CT and Dillon OW Jr (1987), Thermal viscoplastic buckling during the growth of silicon ribbon, Int J Solids Struct 23(3), 387-402.
337. Tsuji I and Yoshimura H (1979), Studies on transient stresses and deformation behavior of groove due to butt-welds of thin mild steel plates (1st report), J Soc Naval Architects Japan 146, 428-435.
338. Tsuji I and Yoshimura FI (1981), Studies on transient stresses and deformation behavior of groove due to butt-welds of thin mild steel plates (2nd report), J Soc Naval Architects Japan 149, 279-286.
339. Tsuji I and Yoshimura H (1982), Studies on transient stresses and deformation behavior of groove due to butt-welds of thin mild steel plates (3rd report), J Soc Naval Architects Japan 151, 278-284.
340. Ueda Y, Takahashi E, Fukuda K, and Nakacho K (1974), Transient and residual stresses in multi-pass welds, Trans Japan Weld Res Inst 3(1), 59-67.
341. Ueda Y, Takahashi E, Fukuda K, Sakamoto K, and Nakacho K (1976), Multipass weld ing stresses in very thick plates and their reduction from stress relief annealing, Trans Japan Weld Res Inst 5(2), 79-89.
342. Ueda Y and Nakacho K (1980), Theory of thermal elastic-plastic analysis with a more general workhardening rule, Trans Japan Weld Res Inst 9(1), 107-114.
343. Ueda Y and Nakacho K (1981), Constitutive equation for thermal elastic-plastic creep state, Trans Japan Welding Res Inst 10(1), 89-94.
344. Ueda Y and Yamakawa T (1971), Analysis of thermal elastic-plastic stress and strain during welding by finite element method, Trans Japan Welding Soc 2(2), 90-100.
345. Ueda Y and Yamakawa T (1973), Analysis of thermal elastic-plastic behavior of metals during welding by finite element method, J Japan Welding Soc 42(6), 567-577.
346. Ueda Y, Fukuda K, and Low JK (1975a), Mechanism of production of residual stress due to slit weld, J Japan Welding Soc 44(7), 580-587.
347. Ueda Y, Fukuda K, and Nakacho K (1975b), Study on type of cracking of fillet weld based on residual stresses calculated by FEM, J Japan Welding Soc 44(3), 250-257.
348. Ueda Y, Fukuda K, Nishimura I, Iiyama H, and Chiba N (1979), Dynamical characteristics of weld cracking in multipass welded comer joint, J Japan Welding Soc 48(1), 34-39.
349. Ueda Y, Nakacho K, and Fujikubo M (1985), Application of the plastic node method to thermal elastic-plastic and dynamic problems, Comput Meth Appl Mech Eng 81, 157-175.
350. Ueda Y, Nakacho K, and Shimizu T (1986), Improvement of residual stresses of circumferential joint of pipe by heat-sink welding, J Press Vessel Tech (ASME) 108(1), 14-23.
351. Uemura K, Nagaki S, Inoue T (1978), Analyses of structural changes and elastic-plastic stresses during quenching of steel, J Soc Mater Sci Japan 27(303), 1152-1157.
352. Umanskii SE (1981), On the construction and investigation of solutions of boundary value problems of thermoviscoelasticity, Prikl Mekh (Engl transl) 44(6), 786-793.
353. Valanis KC and Liams G (1964), A method of analysis of transient thermal stresses in thermorheologically simple viscoelastic solids, J Appl Mech (ASME) 31(1), 47-53.
354. Vujanovic BD (1989), A variational approach to the problem of solidification of a metal semi-infinite thermally nonlinear body, Acta Mech 77, 231-240.
355. Walker KP (1981), Research and development programs for nonlinear structural modeling with advanced time-temperature dependent constitutive relations, NASA CR-165533 1-182.
356. Wang LL (1984), A thermo-viscoplastic constitutive equation based on hyperbolic-shape thermo-activated barriers, J Eng Mater Tech (ASME) 106, 331-336.
357. Wang ZG and Inoue T (1984), A viscoplastic constitutive equation considering melting and solidification and the application to the analysis of welding process, Trans Japan Soc Mech Eng Ser A 50(459), 1900-1908.
358. Wang ZG and Inoue T (1985), Viscoplastic constitutive relation incorporating phase transformation—application to welding, Mat Sci Tech 1, 899-903.
359. Wang ZG and Inoue T (1987), Simulation of continuous casting process considering material flow (2nd report, analysis of deformation and stress), Trans Japan Soc Mech Eng Ser A 53(492), 1739-1742.
360. Wang ZG, Tanaka T, and Inoue T (1987), Simulation of continuous casting process considering material flow (1st report, analysis of temperature), Trans Japan Soc Mech Eng Ser A 53(492), 1735-1738.
361. Weinstock S and Soler A (1985), Tube-to-tubesheet joint interface pressure: pail 1—theoretical analysis with strain hardening and temperature dependent properties, ASME PVR 98(9), 227-234.
362. Weitsman Y (1979), Residual thermal stresses due to cool-down of epoxy-resin composites, J Appl Mech (ASME) 46(3), 563-567.
363. Weitsman Y (1980), Optimal cool-down in linear viscoelasticity, J Appl Mech (ASME) 47(1), 35-39.
364. Weitsman Y and Harper BD (1982), Optimal cooling of cross-ply composite laminates and adhesive joints, J Appl Mech (ASME) 49(4), 735-739.
365. Williams JR, Lewis RW, and Morgan K (1979), An elasto-viscoplastic thermal stress model with applications to the continuous casting of metals, Int J Numer Methods Eng 14, 1-9.
366. Wineman AS (1972), A note on the prediction of residual deformations in the-mioviscoelasticity. J Appl Mech (ASME) 39(3), 848-850.
367. Woelke J and Zielnica J (1989), Determination of transient and residual thermal-hardening stresses in steel plates, Ing Arch 59, 32-42.
368. Wolosewick RM and Gratch S (1965), Transient response in a visco-elastic material with temperature-dependent properties and thermomechanical coupling, J Appl Mech (ASME) 32(2), 620-622.
369. Woo TC and Elder GG (1986), Thermoviscoelastic stress analysis for 304 stainless steel, J Thermal Stresses 9(3), 193-213.
370. Yada T, Koguchi H, Honzawa T, Kaya T, and Miyagawa M (1988), Reliability evaluation of joints ceramics and metals (2nd report, The influence of changing the shape of a joint on the thermal stress of jointed dissimilar materials), Trans Japan Soc Mech Eng Ser A 54(508), 2128-2134.
371. Yamaguchi T, Wang ZG and Inoue T (1984), Analysis of temperature metallic structure and stress in course of quenching of a gear, J Soc Mat Sci Japan 33(370), 814-820.
372. Yeow YT, Morris DH, and Brinson HF (1979), Time-temperature behavior of a unidirectional graphite/epoxy composite, Comp Mat Testing Des (Fifth Conf), ASTM STP 674, ASTM, Philadephia, 263-281.
373. Yoshida H, Sasaki T, Tanaka T, and Hirose Y (1982), Analysis of non-flatness of hot strip after cooling, Tesu to Hagatie 68(8), 965-973.
374. Yoshida H, Kataoka K, Sasaki T, and Tanaka T (1983), Analysis of deflection during cooling in rolled U-type sheet piles, J Japan Soc Tech Plast 24(270), 715-721.
375. Young RW (1977), Thennomechanical response of a viscoelastic rod driven by a sinusoidal displacement, Int J Solids Struct 13, 925-936.
376. Yuan FR and Wu SL (1985), Transient temperature and residual-stress fields in axisymmetric metal components after hardening, Mat Sci Tech 1, 851-856.
377. Zabaras N, Mukherjee S, and Arthur WR (1987), A numerical and experimental study of quenching of circular cylinders, J Thermal Stresses 10(3), 177-191.
378. Zhurakhovskii S V (1985), Fracture of material in thermoviscoelasto-plastic waves, Problemy Proch (Engl transl) (7), 993-999.
379. Zienkiewicz OC, Onate E, and Heinrich JC (1981), A general formulation for coupled thermal flow of metals using finite elements, Int J Numer Methods Eng 17, 1497-1514.