Measurement techniques for unsteady flows in turbomachines

Experiments in Fluids

Volumn 28, Issue 4, 2000, Pages 285-321

  Sieverding, C H ^a   Arts, T ^a   Denos R ^a   Brouckaert, J F ^a  

^a VON KARMAN INSTITUTE FOR FLUID DYNAMICS   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000242148     PISSN: 07234864     EISSN: None     Source Type: Journal    
DOI: 10.1007/s003480050390     Document Type: Review

References (128)

1. Ainsworth RW; Allen JL; Dietz AJ (1989) Methods for making unsteady aerodynamic pressure measurements in a rotating turbine stage. AGARD Con Proc 468
2. Ainsworth RW; AlLen JL (1990) Investigating the performance of miniature semi-conductor pressure transducers for use in fast response aerodynamic probes. Proceedings of 10th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", VKI
3. Ainsworth RW; Dietz AJ; Nunn TA (1991) The use of semiconductor sensors for blade surface pressure measurements. J Eng for Gas Turbine and Power 113: 261-268
4. Ainsworth RW; Stickland AD (1992) Experimenting with fast response aerodynamic pressure probes. Proceedings of 11th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", Universität der Bundeswehr München
5. Ainsworth RW; Allen JL; Batt JJM (1995) The development of fast response aerodynamic probes for flow measurements in turbomachines. J Turbomach 117: 625-634
6. Ainsworth RW(1995) Recent developments in fast response aerodynamic probe technology. VKI LS 1995-01
7. Arts T; Heider R (1994) Aerodynamic and heat transfer performance of a three dimensional annular transonic nozzle guide vane. 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Indianapolis, USA
8. Arts T; Dénos R; Brouckaert JF (1996) Hot wire thermometry. VKI Lecture Series 1996-07 on "Temperature Measurements"
9. Arts T; Dénos R; Brouckaert JF; Popp O (1996) The dual hot wire aspirating probe. Proceedings of 13th Symposium on "Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines", ETH-Zürich
10. Battisti L; Schmeer T (1997) Experimental study of the surface heat transfer enhancement in a rib-roughened blade coolant channel by means of double layer thin films. Eurotherm Seminar 55, Santorini, Greece
11. Bellhouse BJ; Schultz DL (1966) Determination of mean and dynamic skin friction, separation and transition in lowspeed flow with a thin-film heated element. J Fluid Mech 24: 379-400
12. Bergh H; Tijdeman H (1965) Theoretical and experimental results for the dynamic response of pressure measuring systems. NLR-TR-F.238
13. Bohn D; Schnittfeld Th (1992) The dynamic response of capillary tubes for use in miniature pressure probes. Proceedings of 11th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", Universität der Bundeswehr München
14. Broichhausen KD; Kauke G; Shi Zhi-da (1983) Some aspects of semi-conductor probe development. Proceedings of 7th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", RWTH Aachen
15. Brouckaert J-F (1998) Experience with a dual hot wire aspirating probe in a transonic turbine stage. Symposium on "Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines", University of Limerick
16. Brouckaert J-F; Sieverding CH; Manna M (1998) Development of fast response 3-hole pressure probe. Proceedings of the 14th Symposium on "Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines", University of Limerick
17. Bubeck H (1987) Entwicklung einer Keilsonde zur drei-dimensinalen instationären Strömungsmessung und deren Anwendung in einem Axialversichter. Mitteilungen des Instittut für Thermische Strömungsmaschinen und Maschinenlaboratorium der Universität Stuttgart No. 27
18. Buttsworth DR; Jones TV (1996) A fast-response total temperature probe for unsteady compressible flows. ASME 96-GT-350
19. Buttsworth DR; Jones TV; Ghana KS (1996) Fast response total temperature probe experiments in a turbine facility. Proceedings of the 13th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and turbomachines", ETH, Zurich
20. Buttsworth DR; Jones TV (1997) A fast-response high spatial resolution total temperature probe using a pulsed heating technique. ASME 97-GT-301
21. Buttsworth DR; Jones TV; Ghana KS (1997) Unsteady total temperature measurements downstream of a high pressure turbine. ASME 97-GT-407
22. Carta OF; O'Brien RL (1980) Unsteady aerodynamic measurement techniques for turbomachinery research. ASME Book 100130
23. Camci C; Arts T (1985) Short duration measurements and numerical simulation of heat transfer along the suction side of a film cooled gas turbine blade. J Eng for Gas Turbine and Power 107: 991-997
24. Chabai AJ; Emrich RJ (1955) Measurement of wall temperature and heat flow in a shock tube. J Appl Phys 26: 779-780
25. Cherret MP (1990) Temperature error compensation applied to pressure measurements taken with miniature semi-conductor pressure transducers in a high speed research compressor. Proceedings of the 10th Symposium on "Measuring Technique for Transonic and Supersonic Flows in Cascades and Turbomachines", VKI
26. Cherret MA; Bryce JDZ; Ginder RB (1994) Unsteady 3D flow in a single-stage transonic fan. Part I: "Unsteady rotor exit flow field". ASME 94-GT-223 & Part II: "Unsteady stator exit flow field"; ASME 94-GT-223
27. Chivers JWH (1981) Blade pressure measurements. VKI Lecture Series 1981-7 on "Measurement Techniques in Turbomachines"
28. Chivers JWH (1995) The development and application of miniature silicon pressure transducers for gas turbine engine research and development. VKI LS 1995-01 on "Measurement Techniques"
29. Collis DC; Williams MJ (1959) Two dimensional convection from heated wires at low Reynolds number. J Fluid Mech 6: 357-384
30. Consigny H; Richards BE (1982) Short duration measurements of heat transfer rate to a gas turbine rotor blade. ASME J Eng for Power 104: 542-551
31. Cook SCP (1989) The development of a high response aerodynamic wedge probe and use on a high speed research compressor. Proceedings of 9th International Symposium on "Air Breathing Engines", Athens, Greece
32. Cook WJ; Felderman EJ (1966) Reduction of data from thin film heat transfer gauges: a concise numerical technique. AIAA J 4: 561-563
33. Cook WJ (1970) Determination of heat-transfer rates from transient surface temperature measurements. AIAA J 8: 1366-1368
34. Davies MRD; Duffy JT (1995) A semi-empirical theory for surface mounted aerodynamic wall shear stress gauges. ASME Paper 95-GT-193
35. Davies MRD; Fitzgerald JE; Duffy JT; O'Donnell FK (1997) Measurements of aerodynamic wall shear stress with heated thin film gauges. ASME Paper 97-GT-211
36. Dénos R; Sieverding CH (1997) Assessment of the cold wire resistance thermometer for high speed turbomachinery applications. Transactions of ASME: J Turbomach 119: 1140-148
37. Dénos R (1996) Aero-thermodynamic investigation of the unsteady flow in a transonic turbine rotor. Ph.D. thesis, Ecole Supérieure d'Ingénieurs de Poitiers
38. Dibelius G; Minten G (1983) Measurement of unsteady pressure fluctuations using capillary tubes. Proceedings of 7th Symposium on 'Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", RWTH Aachen
39. Dominy RG; Hodson HP (1992) An investigation of factors influencing the calibration of 5-hole probes for 3-D flow measurements. ASME 92-GT-216
40. Doorly JE; Oldfield MLG (1985a) Simulation of the effect of shock wave passing on a turbine rotor blade. ASME J Eng for Gas Turbine and Power 107: 998-1006
41. Doorly JE; Oldfield MLG (1985b) Simulation of wake passing in a stationary turbine rotor cascade. J Propulsion Power 1: 316-318
42. Doorly JE; Oldfield MLG (1987) The theory of advanced multilayer thin film heat transfer gauges. Int J Heat Mass Transfer 29: 1159-1168
43. Doorly JE (1988) Procedures for determining surface heat flux using thin film gauges on a coated metal model in a transient facility. J Turbomach 110: 242-250
44. Duffy JT; Davies MRD; Hamilton L (1995) The calibration of a surface mounted aerodynamic wall shear stress gauge in laminar flow with a free-stream pressure gradient. ASME Paper 95-GT-127
45. Dunn MG; Hause A (1982) Measurement of Heat Flux and Pressure in a turbine stage. ASME J Eng for Power 104: 215-223
46. Dunn MG; Chupp RE (1988) Time-averaged heat flux distributions and comparison with prediction for the Teledyne 702 HP turbine stage. ASME J Eng for Power 110 (1): 51-56
47. Dunn MG (1995) The thin-film gauge. VKI Lecture Series 1995-01 on "Measurement Techniques"
48. Eklund TI; Dobbins RA (1977) Application of the hot wire anemometer to temperature measurements in transient gas flows. Int J Heat Mass Transfer 20: 1051-105
49. Elmendorf W; Kauke GK (1988) Semi-conductor wedge probes for unsteady flow measurements. Proceedings of 9th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", St. Catherines College Oxford
50. Epstein AH (1985) High frequency response measurements in turbomachines. VKI LS 1985-03
51. Epstein AH; Guenette GR; Norton RJG; Yuzhang C (1986) High frequency response heat flux gauge. Rev Scient Instrum 57: 639-649
52. Fitzgerald JE; Niven AJ; Davies MRD (1998) Turbine blade aerodynamic wall shear stress measurements and predictions Paper presented at the 1998 IGTI Conference, Stockholm, Sweden
53. Fournier P (1990) Aéroacoustique des écoulements pulsés compressibles, métrologie et étude expérimentale du circuit d'admission d'un moteur thermique, Ph.D. thesis, Université de Poitiers
54. Giles MB; Haimes R (1991) Validation of a numerical method for unsteady flow calculations, ASME IGTI, Cologne
55. Gossweiler C; Humm HJ; Kupferschmied P (1990) The use of piezo resistive semi-conductor pressure transducers for fast response pressure measurements in turbomachinery, Proceeding of 10th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", VKI
56. Gossweiler CR; Herter D; Kupferschmied P (1992) Fast response aerodynamic probe measurements in a turbulent pipe flow. Proceeding of 11th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", Universität der Bundeswehr München
57. Gossweiler CR (1993) Sonden und Messsysteme für schnelle aerodynamische Strömungsmessung mit piezoresistiven Druckgebern. Dissertation ETH Zürich No. 10253
58. Graham LJW; Bremhorst K (1991) Instantaneous time-constant adjustment of cold-wires acting as resistance thermometers when using multi-wire anemometer probes. Meas Sci Technol 2: 238-241
59. Guo SM; Spencer MC; Lock GD; Jones TV; Harvey NW (1995) The application of thin film gauges on flexible plastic substrates to the gas turbine situation. ASME Paper 95-GT-357
60. Guo SM; Jones TV; Lock GD (1997) Gas turbine heat transfer measurements with engine simulated film cooling; 2nd European Conference on Turbomachinery-Fluid Dynamics and Thermodynamics, Antwerpen, Belgium
61. Heneka A (1983a) Instantaneous 3-D flow measurements with a four-hole wedge probe. Proceeding of 7th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", RWTH Aachen
62. Heneka A (1983b) Development and application of a wedge probe for unsteady 3-D flow measurements in turbomachines. Ph.D. thesis, University Stuttgart
63. Hilditch MA; Ainsworth RW (1990) Unsteady heat transfer measurements on a rotating blade. ASMA Paper 90-GT-175
64. Hinze OJ (1975) Turbulence. 2nd Edition, McGraw-Hill, London
65. Hodson HP (1984) The detection of boundary-layer transition and separation in high speed turbine cascades. Proceedings of 7th Symposium on "Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines", RWTH Aachen
66. Hodson HP (1985) Boundary layer transition and separation near the leading edge of a high-speed turbine blade. ASME J Eng Gas Turbines Power 107: 127-134
67. Hodson HP; Itsman I; Steele AB (1994) An investigation of boundary layer development in a multi stage LP turbine. J Turbomach 116: 375-383
68. Hodson HP (1998) Blade row interactions in low pressure turbines. VKI Lecture Series 1998-02 on "Blade row interference effects in axial turbomachinery stages"
69. Hoheisel H; Kiock R; Lichtfuss HJ; Fottner L (1987) Influence of free stream turbulence and blade pressure gradient on boundary layer and loss behavior on turbine cascades. J Turbomach 109: 210-219
70. Humm HJ; Verdegaal JI (1992) Aerodynamic design criteria for fast response probes. Proceedings of 11th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", Universität der Bundeswehr München
71. Humm HJ; Gizzi WP; Gyarmathy G (1994) Dynamic response of aerodynamic probes in fluctuating 3-D flows. Proceedings of 12th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", Institute of Thermomechanics, Prague
72. Ji Ryong Cho; Kyung Chun Kim (1993) A simple high performance cold-wire thermometer. Meas Sci Technol 4: 1346-1349
73. Jones TV; Schultz DL (1971) Film cooling studies in subsonic and supersonic flow using a shock tunnel. 8th Int Shock Tube Symposium, Eds A.G. Gaydon and P.R. Owen, Chapman & Hall
74. Jones TV; Schultz DL; Oldfield MLG; Daniels LC (1978) Measurement of heat transfer rate to turbine blades and nozzle guide vanes in a transient cascade. 6th International Heat Transfer Conference, Toronto, Canada
75. Kerrebrock JL; Epstein AH; Tompkins WT (1980) A miniature high frequency sphere probe. ASME Book No. 100130 "Measurement Methods in Rotating Components of Turbomachines"
76. Kidd SR; Sinha PG; Barton SR; Jones JDC (1993) Wind tunnel evaluation of novel interferometric optical fibre heat transfer gauges. Meas Sci Technol 4: 362-368
77. Kidd SR; Barton JS; Inci MN; Jones DC (1994) Unsteady gas temperature measurement using ultra-short optical fibre Fabry-Pérot interferometer. Meas Sci Technol 5: 816-822
78. Kidd SR; Barten JS; Meredith P; Jones JDC; Cherret MA; Ghana KS (1995) A fibre optic probe for gas total temperature measurements in turbomachinery. J Turbomach 117: 635-641
79. Kotidis PA; Epstein AH (1989) Unsteady radial transport in a transonic in a transonic compressor stage. J Turbomach 113: 207-218
80. Kovasznay LSG; Tani I; Kawaura M; Fujita H (1981) Instantaneous pressure distribution around a sphere in unsteady flow. J Fluids Eng 103: 497-503
81. Kupferschmied P; Gossweiler CR; Gyarmathy G (1994) Aerodynamic fast response probe measurement system: state of development, limitations, future trends. Proceedings of 12th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines"; Institute of Thermomechanics, Prague
82. Lagraff JE; Ashworth DA; Schultz DL (1988) Measurement and modeling of the gas turbine blade transition process as disturbed by wakes. ASME Paper 88-GT-232
83. La Rue JC; Deaton T; Gibson CH (1974) Measurement of high-frequency turbulent temperature. Rev Scient Instrum 46: 757-764
84. Larguier R (1981) Experimental analysis methods for unsteady flows in turbomachines. J Eng Power 103: 415-424
85. Laufer J (1954) The structure of turbulence in fully developed pipe flow. NACA TR 1174, 1954 (update 1975)
86. Lienhard V; Helland KN (1989) An experimental analysis of fluctuating temperature measurements using hot-wires at different overheats. Exp Fluids 7: 256-270
87. Liepmann HW; Skinner GT (1954) Shearing-stress measurements by use of a heated element. NACA TN 3268
88. Louis JF; Goulios GN; Demirjian AM; Topping RF; Wiedhopf JM (1974) Short duration studies of turbine heat transfer and film cooling effectiveness. ASME Paper 74-GT-131
89. Maass M (1992) Temperature error compensation of a miniature semiconductor pressure transducers and first results of measurements taken in a ducted propfan rotor. Proceedings of 11th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines", Universität der Bundeswehr München
90. Matsunaga S; Ishibashi H; Nishi M (1978) Accurate measurement of non-steady 3-D incompressible flow by means of a combined 5-hole probe. In: Crow DE; Miller JH (eds) Non-steady fluid dynamics. ASME
91. Menendez AN; Ramaprian BR (1985) The use of flush-mounted hot-film gauges to measure skin friction in unsteady boundary layers. J Fluid Mech 161: 139-159
92. Miller CG (1981) Comparison of thin-film resistance heat transfer gauges with thin skin transient calorimeter gages in conventional hypersonic wind tunnels. NASA Report TM-83197
93. Millon F; Paranthoen P; Trinite M (1978) Influence des échanges thermiques entre le capteur et ses supports sur la mesure des fluctuations de température dans un écoulement turbulent. Int J Heat Mass Transfer 21: 1-16
94. Ng WF; Epstein AH (1983) High frequency temperature and pressure probe for unsteady compressible flows, Rev Scient Instrum 54: 1678-1683
95. Ng WF (1986) Simultaneous measurements of stagnation pressure and temperature using an aspirating probe. International Symposium on Pressure and Temperature Measurements, ASME Winter Annual Meeting, Anaheim, USA
96. O'Brien WF; Cousins WT; Sexton MR (1980) Unsteady pressure measurements and data analysis techniques in axial flow compressors. ASME Book 100130
97. Oldfield MLG; Kiock R; Holmes AT; Graham CG (1981) Boundary layer studies on highly loaded cascades using heated thin films and a traversing probe. ASME J Eng Gas Turbines Power 103: 237-246
98. Oldfield MLG; Burd HJ; Doe HG (1984) Design of wide bandwidth analogue circuits for heat transfer instrumentation in transient tunnels. 16th ICHMT Symposium on Heat and Mass Transfer, Dubrovnik, pp 233-258
99. Olson HF (1957) Acoustical engineering. Princeton: Van Nostrand
100. Paranthoen P; Petit C; Lecordier JC (1982) The effect of thermal prong-wire interaction on the response of a cold wire in gaseous flow. J Fluid Mech 124: 457-473
101. Pelle O; Arts T (1997) Development of a double-layer thin film gauge for surface heat transfer measurements. Eurotherm Seminar 55, Santorini, Greece
102. Pope RJ (1972) Skin friction measurements in laminar and turbulent flows using heated thin film gauges. AIAA J 10: 729-730
103. Portat M; Bruere A; Godefroy JC; Helias F (1981) Measurements possibilities on turbomachines with thin film transducers. Proceedings of 6th Sympposium on Measuring techniques for transonic and supersonic flows in cascades and turbomachines, Ecole Centrale de Lyon
104. Pucher P; Göhl R (1987) Experimental investigation of boundary layer separation with heated thin-film sensors. J Turbomach 109: 303-309
105. Rabinowicz J; Jessey ME; Bartsch CA (1955) Resistance thermometer for transient high temperature studies. J Appl Phys 27: 97-98
106. Richards BE (1976) Heat transfer to cooled turbine blades - a review. VKI Lecture Series 83 on "Turbine Blade Cooling"
107. Richards WB (1986) Propagation of sound waves in tubes of non-circular cross section. NASA TP 2601
108. Rodriguez O (1984) The circular cylinder in subsonic and transonic flow. AIAA J 22: 1713-1719
109. Ruck G (1988) Turbulence measurements with a high response pressure probe. Proceedings of 9th Symposium on Measuring techniques for transonic and supersonic flows in cascades and turbomachines, St. Catherine's College Oxford
110. Ruck G; Stetter H (1990) Unsteady velocity and turbulence measurements with a fast response pressure probe. ASME 90-GT-232
111. Schäffer A; Miatt DC (1985) Experimental evaluation of heavy fan-high-pressure compressor interaction in a three-shaft engine; Part 1 - experimental set-up and results. J Eng for Gas Turbines and Power 107: 828-833
112. Schröder T (1991) Investigations of blade row interaction and boundary layer transition phenomena in a multi-stage aero engine low pressure turbine by measurements with hot film probes and surface mounted hot film gauges. VKI Lecture Series 1991-06 on "Boundary Layers in Turbomachines"
113. Schulte V; Hodson HP (1998) Unsteady wake induced boundary layer transition in high lift LP turbines. J Turbomach 120: 28-35
114. Schultz DL; Jones TV (1973) Heat transfer measurements in short duration facility. AGARDograph 165
115. Schultz DL; Jones TV; Oldfield MLG; Daniels LC (1977) A new transient cascade facility for the measurement of heat transfer rates. AGARD CP 229 "High Temperature Problems in Gas Turbine Engines"
116. Shepherd IC (1981) A four-hole pressure probe for fluid flow measurements in 3-dimensions. J Fluids Eng 103: 590-594
117. Shreeve RP; Neuhoff F (1984) Measurements of the flow from a high speed compressor rotor using dual probe sampling technique. J Eng for Gas Turbines & Power 106(2): 366-375
118. Sieverding CH; Arts T; Dénos (1995) Annular cascade tests. In: Dunker R (ed) Advances in Engines Technology, J. Wiley & Sons, pp 235-284
119. Suryavamshi N; Lakshminarayana B; Prato J (1998) Aspirating probe measurements of the unsteady total temperature field downstream of an embedded stator in a multi-stage axial flow compressor. J Turbomach 120: 156-169
120. Tsuji T; Nagano Y; Tagawa M (1992) Frequency response and instantaneous temperature profile of cold-wire sensors for fluid temperature fluctuation measurements. Exp Fluids 13: 171-178
121. Van Zante DE; Suder KL; Strazisar AJ; Okiishi TH (1995) An improved aspirating probe for total temperature and total pressure measurements in compressor flows. J Turbomach 117: 642-649
122. Vidal RJ (1956) Model instrumentation techniques for heat transfer and force measurements in a hypersonic shock tunnel. Cornell Aeronautical Laboratory Report AD-917-A-1
123. Wallace JD; Davies MRD (1996) Turbulence measurement with a calibrated pilot mounted pressure transducer. Proceedings of 13th Symposium on "Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines"; ETH Zürich
124. Warshawski I (1990) Foundation of Measurement and Instrumentation. NASA Reference Publication 1222
125. Weeks AR; Beck JK; Joshi ML (1988) Response and compensation of temperature sensors. J Phys E: Scient Instrum 21: 989-993
126. Welsh BL; Pyne CR (1980) A method to improve the temperature stability of semiconductor strain gauge transducers J. Phys E: Sci Instrum 13: 816-818
127. Weyer H (1975) On the measurement of the fluctuating total and static pressure in turbomachines including the determination of correct time weighted pressures. In: "Modern Methods of Testing Rotating Components of Turbomachines (Instrumentation)". AGARD-AG-207
128. Wood NB; Langford RW; Pridly WJ (1981) Effects of flow unsteadiness on the time-mean response of a Kiel-type total pressure probe: preliminary investigation; Proceedings of 6th Symposium on "Measuring Technique for Transonic and Supersonic Flow in Cascades and Turbomachines", Ecole Centrale de Lyon