Organic-inorganic hybrid materials

Current Opinion in Solid State and Materials Science

Volumn 1, Issue 6, 1996, Pages 806-811

  Chujo, Yoshiki ^a  

^a KYOTO UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000086330     PISSN: 13590286     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-0286(96)80105-7     Document Type: Article

References (50)

1. Chujo Y, Saegusa T: Organic polymer hybrids with silica gel formed by means of the sol-gel method. Adv Polym Sci 1992, 100:11-29.
2. Sanchez C, Ribot F: Design of hybrid organic-inorganic materials synthesized via sol-gel chemistry. New J Chem 1994, 18:1007-1047.
3. Judeinstein P, Sanchez C: Hybrid organic-inorganic materials: a land of multidisciplinarity. J Mater Chem 1996, 6:511-525.
4. Schubert U, Hüsing N, Lorenz A: Hybrid inorganic-organic materials by sol-gel processing of organofunctional metal alkoxides. Chem Mater 1995, 7:2010-2027.
5. Novak BM: Hybrid nanocomposite materials between inorganic glasses and organic polymers. Adv Mater 1993, 5:422-433.
6. Loy DA, Shea KJ: Bridged polysilsesquioxanes. Highly porous hybrid organic-inorganic materials. Chem Rev 1995, 95:1431-1442.
7. Mark JE: Novel reinforcement techniques for elastomers. J Appl Polym Sci Appl Polym Symp 1992, 50:273-282.
8. Mark JE, Lee CY, Bianconi PA (Eds): Hybrid organic-inorganic composites. Washington; American Chemical Society; 1995. [American Chenical Society Symposium Series, vol 585.]
9. 12: a model for the vibrational structure of zeolite A. J Phys Chem 1994, 98:2817-2831.
10. Sellinger A, Laine RM: Silsesquioxanes as synthetic platforms. Thermally curable and photocurable inorganic/organic hybrids. Macromolecules 1996, 29:2327-2330. The product in this study can be used as the 'so-called' macromonomer for the preparation of new organic-inorganic hybrid materials.
11. Sellinger A, Laine RM, Chu V, Viney C: Palladium- and platinum-catalyzed coupling reactions of allyloxy aromatics with hydridosilanes and hydridosiloxanes: novel liquid crystalline/organosilane materials. J Polym Sci Polym Chem 1994, 32:3069-3089.
12. Cardenas A, Hovnanian N, Smaihi M: Sol-gel formation of heteropolysiloxanes from diethylphosphatoethyltriethoxysilane and tetraethoxysilane. J Appl Polym Sci 1996, 60:2279-2288. The hybrid materials obtained consist of Si-C and P-C bonds, which are stable toward hydrolysis.
13. Burkett SL, Sims SD, Mann S: Synthesis of hybrid inorganic-organic mesoporous silica by co-condensation of siloxane and organosiloxane precursors. Chem Commun 1996:1367-1368. The surfactant added is very important as it acts as a template to control the pore size of the porous silica formed.
14. Reetz MT, Zonta A, Simpelkamp J: Efficient heterogeneous biocatalysts by entrapment of lipases in hydrophobic sol-gel materials. Angew Chem Int Ed 1995, 34:301-303. The immobilized lipase showed much higher activity than the commercial one. This heterogeneous biocatalyst can be used for the kinetic resolution of 1-phenylethanol producing much higher enatiomerically pure products.
15. Schwertfeger F, Glaubitt W, Schubert U: Hydrophobic aerogels from tetramethoxysilane/methyltrimethoxysilane mixtures. J Non-Cryst Solids 1992, 145:85-89.
16. Reetz MT, Zonta A, Simpelkamp J, Könen W: In situ fixation of lipase-containing hydrophobic sol-gel materials on sintered glass - highly efficient heterogeneous biocatalysts. Chem Commun 1996:1397-1398. Fixation of lipase-containing hybrid materials on sintered glass resulted in the formation of highly active and mechanically satble heterogeneous biocatalysts, which is very useful in their applications.
17. Avnir D: Organic chemistry within ceramic matrices: Doped sol-gel materials. Accounts Chem Res 1995, 28:328-334.
18. Miasik JJ, Hooper A, Tofield BC: Conducting polymer gas sensors. J Chem Soc Faraday Trans 1 1986, 82:1117-1126.
19. Lacy Costello BPJ, Evans P, Ewen RJ, Honeyboume CL, Ratcliffe M: Novel composite organic-inorganic semiconductor sensors for the quantitative detection of target organic vapours. J Mater Chem 1996, 6:289-294. The combination of organic and inorganic semiconductors should be pointed out to give reversible changes in electrical resistance.
20. Maekawa T, Tamaki J, Miura N, Yamazoe N, Matsushima S: Development of tin dioxide-based ethanol gas sensor. Sensors Actuators B Chem 1992, 9:63-69.
21. Gardner JW, Hines EL, Tang HC: Detection of vapors and odors from a multisensor array using pattern-recognition techniques 2. Artificial neural networks. Sensors Actuators B Chem 1992, 9:9-15.
22. Persaud K, Dodd G: Analysis of discrimination mechanisms in the mammalian olfactory system using a model nose. Nature 1982, 299:352-355.
23. Nenov T, Yordanov S: Ceramic sensor device materials. Sensors Actuators B Chem 1992, 8:117-122.
24. Oriakhi CO, Lemer MM: Poly(pyrrole) and poly(thiophene)/clay nanocomposites via latex-colloid interaction. Mater Res Bull 1995, 30:723-729. Clays are also used as an inorganic component for the preparation of hybrid materials. The direction of the components in the matrix can sometimes be controlled in these materials.
25. Lemmon JP, Lemer MM: Preparation and characterization of nanocomposites of polyethers and molybdenum disulfide. Chem Mater 1994, 6:207-210.
26. Vaia R, Ishii H, Giannelis E: Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates. Chem Mater 1993, 5:1694-1696.
27. 29Si MAS NMR spectroscopy. Macromolecules 1996, 29:1305-1312. Spectroscopic characterization is very important in the elucidation the structure of hybrid materials.
28. Liz-Marzán LM, Philipse AP: Synthesis and optical properties of gold-labeled silica particles. J Colloid Interface Sci 1995, 176:459-466.
29. Liz-Marzán LM, Giersig M, Mulvaney P: Homogeneous silica coating of vitreophobic colloids. Chem Commun 1996:731-732. The results in this paper present the preparation of new three-component hybrid materials consisting of organic polymers, inorganic materials, and metal colloids.
30. Betrabet C, Wilkes GL: Optically abrasion resistant materials using a sol-gel approach. Amer Chem Soc Polym Prep 1992, 33:286-287.
31. Tamami B, Betrabet C, Wilkes GL: New ceramer high optical abrasion resistant transparent coating materials based on functionalyzed maleimide and a tris(m-aminophenyl)phosphine oxide compound. Polym Bull 1993, 30:39-45.
32. Tamami B, Betrabet C, Wilkes GL: Synthesis and application of abrasion resistant coating materials based on functionalyzed bis and tris maleimides. Polym Bull 1993, 30:393-399.
33. Wang B, Wilkes GL: Novel hybrid inorganic-organic abrasion-resistant coatings prepared by a sol-gel process. J Macromol Sci Pure Appl Chem 1994, A31:249-260.
34. Wen J, Wilkes GL: Novel abrasion resistant inorganic/organic coating materials based on functionalized diethylenetriamine, glycerol and diols. Amer Chem Soc Polym Prep 1995, 36:429-430. The advantage of hybrid materials as abrasion-resistant coatings has been well demonstrated in this paper.
35. Ellsworth MW, Novak BM: Mutually interpenetrating inorganic-organic networks. New routes into nonshrinking sol-gel composite materials. J Am Chem Soc 1991, 113:2756-2758.
36. Novak BM, Davies C: "Inverse" organic-inorganic composite materials 2. Free-radical routes into nonshrinking sol-gel composites. Macromolecules 1991, 24:5461-5483.
37. Novak BM, Ellsworth MW: "Inverse" organic-Inorganic composite materials. High glass content non-shrinking sol-gel composites. Mater Sci Eng A 1993, 162:257-264.
38. Ellsworth MW, Novak BM: "Inverse" organic-inorganic composite materials 3. High glass content "nonshrinking" sol-gel composites via poly(silicic acid esters). Chem Mater 1993, 5:839-844.
39. Wei Y, Jin D, Yang C, Wei G: Synthesis of organic-inorganic hybrid sol-gel materials with low volume-shrinkages. Am Chem Soc Polym Mater Sci Eng 1996, 74:244-245. Large volume shrinkage is one of the inherent problems in industrial application of hybrid materials. This paper describes a very convenient and useful technique to overcome this disadvantage.
40. Wei Y, Yang D, Bakthavatchalam R: Thermal stability and hardness of new polyacrylate-silica hybrid sol-gel materials, Mater Lett 1992, 13:261-266.
41. Wei Y, Yang D, Tang L, Hutchins MK: Synthesis, characterization, and properties of new polystyrene-silica hybrid sol-gel materials. J Water Res 1993, 8:1143-1152.
42. Wei Y, Yang D, Tang L: Synthesis of new polyacrylonitrile-silica hybrid sol-gel materials and their thermal properties. Makromol Chem Rapid Commun 1993, 14:273-278.
43. Wei Y, Wang W, Yang D, Tang L: Synthesis of water-soluble polyacrylics modified silica sol-gel materials. Chem Mater 1994, 6:1737-1741.
44. Wei Y, Yeh J, Jin D, Jia X, Wang J: Composites of electronically conductive polyaniline with polyacrylate-sillca hybrid sol-gel materials. Chem Mater 1995, 7:969-974.
45. Kodokian GKA, Kinloch AJ: Surface pretreatment and adhesion of thermoplastic fiber composites. J Mater Sci Lett 1988, 7:625-627.
46. Banerjee AN, Saha N: Flexural behavior of unidirectional polyethylene-carbon fibers-PMMA hybrid composite laminates. J Appl Polym Sci 1996, 60:139-142. The combination of an organic polymer and carbon fiber produced interesting hybrid materials having a good balance of flexural behavior.
47. Scobbo JJ: Effect of solid-state curing on the viscoelastic properties of poly(phenylene sulfide). J Appl Polym Sci 1993, 47:2169-2175.
48. Menon N, Blum FD, Dharani LR: Use of titanate coupling agents in Kevlar-phenolic composites. J Appl Polym Sci 1994, 54:113-123.
49. Jang J, Kim H: Performance improvement of glass fiber- poly(phenylene sulfide) composite. J Appl Polym Sci 1996, 60:2297-2306. Fiber-reinforced polymer composites have been widely used as high performance materials in aerospace and automotive applications. This paper describes surface modification of a glass fiber using silane coupling agents.
50. Ghosh K, Maiti SN: Mechanical properties of silver-powder-filled polypropylene composites. J Appl Polym Sci 1996, 60:323-331. A titanate coupling agent may assist the hybridization of isotactic polypropylene and silver powder.