Dynamic constitutive and failure behavior of a two-phase tungsten composite

Journal of Applied Mechanics, Transactions ASME

Volumn 64, Issue 3, 1997, Pages 487-494

  Zhou, M ^a   Clifton, R J ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b Brown University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000080976     PISSN: 00218936     EISSN: 15289036     Source Type: Journal    
DOI: 10.1115/1.2788919     Document Type: Article

References (33)

1. Andrews, E. W., Bower, A. F., and Duffy, J., 1992, “Shear Band Formation in a Tungsten Heavy Alloy,” Proc. Symposium on Shear Bands and Viscoplastic Theories, The 29th Annual Technical Meeting of the Society for Engineering Science, Sep. 14-16, La Jolla, CA.
2. Baek, W. H., Hong, M.-H., Lee, S., and Chung, D.-T., 1994, “A Study of the Shear Localization Behavior of Tungsten Heavy Alloys,” Proc. Of the 2nd International Conference on Tungsten and Refractory Metals, A. Bose and R. Dowding, eds., Mclean, VA, pp. 463-471.
3. Belk, J. A., Waltson, C. H., Bentley, A. R., and Hogwood, M. C., 1994, “Dynamic Deformation Characteristics of Tungsten Alloys,” Proc. Of the 2nd International Conference on Tungsten and Refractory Metals, A. Bose and R. Dowding, eds., Mclean, VA, pp. 389-399.
4. Bose, A., Sims, D., and German, R. M., 1988, “Test Temperature and Strain Rate Effects on the Properties of a Tungsten Heavy Alloy,” Metallurgical Transactions A, Vol. 19A, pp. 487-494.
5. Churn, K.-S., and German, R. M., 1984, “Fracture Behavior of W-Ni-Fe Heavy Alloys,” Metallurgical Transactions A, Vol. 15A, pp. 331-338.
6. Clifton, R. J., and Klopp, R. W., 1985 “Pressure-Shear Plate Impact Testing,” Metals Handbook, Vol. 8, 9th ed., Amer. Soc. Metals, pp. 230-239.
7. Coates, R. S., and Ramesh, K. T., 1990a, “The Rate-Dependent Deformation of a Tungsten Heavy Alloy,” The Johns Hopkins University Report, No. DIL-9001, June, Baltimore, MD.
8. Coates, R. S., and Ramesh, K. T., 1990b, “The Deformation of Tungsten Alloys at High Strain Rates,” The Johns Hopkins University Report, No. DIL-9002, Nov., Baltimore, MD.
9. Costin, L. S., Crisman, E. E., Hawley, R. H., and Duffy, J., 1979, “On the Localization of Plastic Flow in Mild Steel Tubes under Dynamic Torsional Loading,” Proc. 2nd Conf. On Mech. Properties of Materials at High Rates of Strain, J. Harding, ed., The Institute of Physics, London, pp. 90-100.
10. Duffy, J., Campbell, J. D., and Hawley, R. H., 1971, “On the Use of a Torsional Split-Hopkinson Bar to Study Rate Effects in 1100-0 Aluminum,” ASME Journal of Applied Mechanics, Vol. 38, pp. 83-91.
11. Ekbom, L., 1981, “Microstructural Study of the Deformation and Fracture Behavior of a Sintered Tungsten-Base Composite,” Modem Developments in Powder Metallurgy, Vol. 14, H. H. Hausner, H. W. Antes, and G. D. Smith, eds., Metal Powder Industries Federation, Princeton, NJ, pp. 177-188.
12. Hartley, K. A., Duffy, J., and Hawley, R. H., 1985, The Torsional Kolsky (Split-Hopkinson) Bar, Metals Handbook, Vol. 8, ASM, pp. 218-228.
13. Hofmann, H., and Petzow, G., 1984, “Influence of Sintering Atmosphere on Mechanical Properties of Tungsten Based Heavy Alloys,” Modern Developments in Powder Metallurgy, Vol. 17, pp. 17-31.
14. Krock, R. H., and Shepard, L. A., 1963, “Mechanical Behavior of the Two-Phase Composite, Tungsten-Nickel-Jron,” Transactions of The Metallurgical Society of AIME, Vol. 227, pp. 1127-1134.
15. Krock, R. H., 1964, “Effect of Composition and Temperature on the Dynamic Elastic Moduli of W-Ni-Fe Composite Materials,” Proc. ASTM, Vol. 64, pp. 712-718.
16. Kumar, P., and Clifton, R. J., 1976, Optical Alignment of Impact Faces for Plate Impact Experiments, J. Appl. Phy Vol. 48, No. 3, pp. 1366-1367.
17. Lassila, D. H., and Connor, A., 1991, “Fracture Behavior of Warm Forged and CVD Tungsten,” Lawrence Livermore National Laboratory Report, No. UCRL-JC-106552, Proc. Of the Symposium Tungsten Heavy Alloys-Recent Advances, TMS/AIME Refractory Metals Committee, TMS/AIME 1991 Annual Meeting, New Orleans, LA.
18. Magness, L. S., 1992, “Properties and Performance of KE Penetrator Materials,” Proceedings of the First International Conference on Tungsten and Tungsten Alloys, A. Bose and R. J. Dowding, eds., Nov. 15-18, Arlington VA, Metal Powder Industries Federation, pp. 15-22.
19. Meyer, L. W., Kunze, H.-D., and Staskewitsch, E., 1983, “Dynamic Strength and Ductility of a Tungsten-Alloy for KE-Penetrators in Swaged and Unswaged Condition under Various Loading,” Proc. 7th International Symposium on Ballistics, The Hague, pp. 289-293.
20. Molinari, A., and Clifton, R. J., 1987, “Analytical Characterization of Shear Localization in Thermoviscoplastic Materials,” ASME Journal of Applied Mechanics, Vol. 54, pp. 806-812.
21. O’Donnell, R. G., and Woodward, R. L., 1990, “The Composition and Temperature Dependence of the Mechanical Properties of Tungsten Alloys,” Metallurgical Transactions A, Vol. 21A, pp. 744-748.
22. Rabin, B. H., and German, R. M., 1988, “Microstructure Effects on Tensile Properties of Tungsten-Nickel-Iron Composites,” Metallurgical Transactions A, Vol. 19A, pp. 1523-1532.
23. Ramesh, K. T., and Coates, R. S., 1992, “Microstructural Influences on the Dynamic Response of Tungsten Heavy Alloys,” Metallurgical Transactions A, Vol. 23A, pp. 2625-2630.
24. Tham, R. H., and Hohler, V., 1995, “Dynamic Behavior of Novel Tungsten Penetra-tor Materials,” Proc. Of the 3rd International Conference on Tungsten and Refractory Metals, A. Bose and R. Dowding, eds., Mclean, VA, pp. 159-166.
25. Yadav, Y., and Ramesh, K. T., 1995, “The Mechanical Properties of Tungsten-based Composites at Very High Strain Rates,” Materials Science and Engineering, Vol. A203, pp. 140-153.
26. Weerasooriya, T., 1994, “Effect of Sudden Change in Strain Rate on the Deformation and Failure Behavior of a Tungsten Heavy Alloy,” Proc. Of the 2nd International Conference on Tungsten and Refractory Metals, A, Bose and R. Dowding, eds., Mclean, VA, pp. 455-471.
27. Weerasooriya, T., Beaulieu, P. A., and Swanson, R., 1992, “Deformation and Failure Behavior of 93W-5Ni-2Fe at High Strain Rate Shear Loading,” U.S. Army Materials Technology Laboratory Report, No. MTL TR 92-19, Watertown, MA.
28. Weerasooriya, Moy. P., and Dowding R. J., 1994, “Effect of W-W grain Contiguity on the High Shear Strain Rate Behavior of 93W-5Ni-2Fe Tungsten Heavy Alloy,” Proc. Of the 2nd International Conference on Tungsten and Refractory Metals, A. Bose and R. Dowding, eds., Mclean, VA, 401-409.
29. Woodward, R. L., Alkemade, S. J., and Magness, L. S., 1994, “Strain Localization and Fracture in Dynamic Dumbbell Compression of Tungsten Alloys,” Proc. Of the 2nd International Conference on Tungsten and Refractory Metals, A. Bose and R. Dowding, eds., Mclean, VA, pp. 431-445.
30. Woodward, R. L., Baldwin, N.J., Burch, I., and Baxter, B.J., 1985, “Effect of Strain Rate on the Flow Stress of Three Liquid Phase Sintered Tungsten Alloys,” Metallurgical Transactions A, Vol. 16A, pp. 2031-2037.
31. Zhao, D., Valencia, J. J., and McCabe, T. J., 1995, “Mechanical and Microstructural Behavior of Tungsten Alloys during High Rate Deformation,” Proc. Of the 3rd International Conference on Tungsten and Refractory Metals, A. Bose and R. Dowding, eds., Mclean, VA, pp. 123-130.
32. Zhou, M., Needleman, A., and Clifton, R. J., 1994, “Finite Element Simulations of Dynamic Shear Localization,” Journal of Mechanics and Physics of Solids, Vol. 42, No. 3, pp. 423-458.
33. Zurek, A. K., and Follansbee, P. S., 1995, “A Comparison of Shear Localization Susceptibility in U-0.75 Wt Pet Ti and W-Ni-Fe during High Strain Rate Deformation,” Metallurgical and Materials Transactions A, Vol. 26A, pp. 1483-1490.