Mechanics of cylindrical shells with non-circular cross-section: A survey

Applied Mechanics Reviews

Volumn 52, Issue 8, 1999, Pages 237-274

  Soldatos, Kostas P ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000022048     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3098937     Document Type: Article

References (197)

1. Albus J, Miermeister M, Friese H, and Fry H (1996) Stress and stability analysis of shells with elliptic cross-section, Z Flugwiss Weltraumforsch 20,117-127.
2. Allakhverdiev DE, Amenzade Ryu, and Shikhlinskaya GT (1990) Numerical analysis of problems of loss of stability of transversely inhomo-geneous cylindrical shells with noncircular contour and its comparison with the asymptotic solution, Mech Comp Mat 26, 94-97.
3. Almroth BO (1966) Influence of edge conditions on the stability of axially compressed cylindrical shells, AIAA J 4, 134-140.
4. Almroth BO, Brogan FA, and Marlowe MB (1971) Collapse analysis of elliptic cones, AIAA J 9, 32-37.
5. Amenzade RY and Shikhlinskaya GT (1985) Stability of cylindrical shells made of inhomogeneous material, DoklAcadNaukAzSSR 41,15-18.
6. Andreev LV, Antsiferov AV, Kucherenko VM, and Pavlenko ID (1985) Regions of stability of elliptical cylinders under loading by static and impulsive external pressure, Strength Mat 17, 1606-1609.
7. Arnold RN and Warburton GB. (1949) Flexural vibrations of the walls of thin cylindrical shells having freely supported ends, Proc Royal Soc, A, 197, 238-256.
8. Baker EH, Kovalevsky L, and Rish FL (1972) Structural Analysis of Shells. McGraw Hill, New York.
9. Baskar S, Varadan VV, and Varadan VK (1984) Thin shell theories and acoustic wave scattering by infinitely long cylindrical shells of arbitrary cross-section, J Acoust Soc Am 75, 1673-1679.
10. Batterman SC (1965) Plartic buckling of axially compressed cylindrical shells, AIAA J3, 316-325.
11. Bergman RM (1973) Investigation of the free vibrations of noncircular cylindrical shells, J Math Mech 37, 1068-1077.
12. Bert CW and Kumar M (1982) Vibration of cylindrical shells of bimodulus composite materials, J Sound Vibr 81, 107-121.
13. Bespalova El (1981) On free vibrations of laminated cylindrical shells of arbitrary open profile, Sov Appl Mech 16, 972-976.
14. Bhimaraddi A and Stevens LK (1984) A higher order theory for free vibration of orthotropic and laminated rectangular plates, J Appl Mech 51, 195-198.
15. Bickford WB (1982) A consistent higher-order beam theory, Dev Theor Appl Mech 11, 137-142.
16. Boyd DE (1969) Analysis of open non-circular cylindrical shells, AIAA J 7, 563-565.
17. Boyd D and Rao KP (1973) A theoretical analysis of ring and/or stringer stiffened elliptical cylinders with arbitrary end conditions. Volume 1 -Analytical derivation and applications, NASACR-1251.
18. Boyd D, Rao KP, and Brugh RL (1972) A theoretical analysis of ring and/or stringer stiffened elliptical cylinders with arbitrary end conditions. Volume II - Users manual for computer program, NASA CR-112174.
19. Brigman GA, Libuha JJ, and Radlinski RP (1977) Analysis of scattering from large planar gratings of compliant cylindrical shells, J Acoust Soc Am 61,48-59.
20. Brush DO and Almroth BO (1975) Buckling of Bars, Plates and Shells, McGraw-Hill, New York.
21. Bushnell D (1969) Stress, stability, and vibration of complex shells of revolution: Analysis and user’s manual for BOSOR3, Rept N-5J-69-1 and SAMSO TR-69-375, Lockheed Missiles & Space Co.
22. Bushnell D (1970) Analysis of buckling and vibration of ring-stiffened, segmented shells of revolution, Int J Solids Struct 6, 157-181.
23. Bushnell D (1971a) Analysis of ring stiffened shells of revolution under combined thermal and mechanical loading, AIAA J 9, 401-410.
24. Bushnell D (1971b) Stress, buckling, and vibration of prismatic shells, AIAA J 9,2004-2013.
25. Bushnell D (1981) Buckling of shells - Pitfall for designers, AIAA J 19, 1183-1226.
26. Chen YN and Kempner J (1976) Buckling of oval cylindrical shells under compression and asymmetric bending, AIAA J 14, 1235-1240.
27. Chen YN and Kempner J (1978) Modal method for free vibration of oval cylindrical shells with simply supported or clamped ends, J Appl Mech 45, 142-148.
28. Cheung YK, Yuan CZ, and Xiong ZJ (1991) Transient response of cylindrical shells with arbitrary shaped sections, Thin-Walled Struct 11, 305-318.
29. Chinnery PA and Humphrey VF (1998) Fluid column resonances of water-filled cylindrical shells of elliptical cross-section, J Acoust Soc Am 103, 1296-1305.
30. Couch WP and Pulos JG (1963) Experimental stresses and strains in a ring-stiffened cylinder of oval cross-section. David Taylor Model Basin Report 1726
31. Culberson LD and Boyd DE (1971) Free vibrations of freely supported oval cylinders, AIAA J 9, 1474-1480.
32. Das A (1967) Stresses on some non-circular cylindrical shells, J Sei Eng Res 11, 327-337
33. Das A (1969) Displacements in non-circular cylindrical shells, J Sei Eng Res 13, 201-208.
34. Dong SB and Tso FKW (1972) On a laminated orthotropic shell theory including transverse shear deformations, J Appl Mech 39, 1091-1096.
35. Donnell LH (1934) Stability of thin-walled tubes under torsion, NACA Rept 479.
36. Donnell LW and Wan CC (1950) Effectes of imperfections on buckling of thin cylinders and collumns under axial compression, J Appl Mech 17, 73-83.
37. Draigor ND (1986) Design of open, noncircular, cylindrical shells with bidirectional variable rigidity, SovApplMech 22, 853-857.
38. Egle DM and Sewall JL (1968) An analysis of free vibration of orthogonally stiffened cylindrical shells with stiffeners treated as discrete elements, AIAA J. 6,518-526.
39. Egle DM and Sober Jr. KE (1969) A theoretical analysis of the free vibrations of discretely stiffened cylindrical shells with arbitrary end conditions, NASA CR-1316.
40. Elsbemd GF and Leissa AW (1973) The vibrations of non-circular cylindrical shells with initial stress, J Sound Vibr 29, 309-329.
41. Feinstein G, Chen YN, and Kempner J (1971a) Buckling of clamped oval cylindrical shells under axial compression, AIAA J 9, 1733-1738.
42. Feinstein G, Erickson B, and Kempner J (1971b) Stability of oval cylindrical shells, Exper Mech 11, 514-520.
43. Firer M and Sheinman I (1995) Nonlinear analysis of laminated noncircular cylindrical shells, IntJ Solids Struct 32, 1405-1416.
44. Flügge W (1934) Statik and Dynamik der Schalen, p 191, SpringerVerlag, Berlin.
45. Flügge W (1961) Stresses in Shells, Springer-Verlag, Berlin.
46. Forsberg K (1964) Influence of boundary conditions on the modal characteristics of thin cylindrical shells, AIAA J 2,2150-2156.
47. Gavelya SP and Sharapova DI (1986) Deformation of noncircular cylindrical shells, PriklMekl 22, 63-68; SovApplMech 22, 52-56.
48. Goldenveizer AL (1961) Theory of Thin Shells, Pergamon Press, New York.
49. Goto Y (1998) Analysis of localization of plastic buckling patterns under cyclic loading, Eng Struct 20,413-424.
50. Goto Y, Toba Y, and Matsuoka H (1995) Localization of plastic buckling patterns under cyclic loading, J EngMech 121,493-501.
51. Grigorenko YM, Vlaikov GG, and Shevchenko AN (1986) Stress state of thick-walled cylindrical shells of noncircular cross section, Prikl Mekh 22, 37-43.
52. Grigorenko YM, Vlaikov GG, and Shevchenko AN (1991) Study of the stress state of thick-walled noncircular cylinders in relation to indices of the variability of the load along the generatrix and diretrix, Sov Appl Mech 27, 231-236.
53. Grigorenko YM, Vlaikov GG, and Shevchenko AN (1995) Stress state of hollow orthotropic noncircular cylinders under local loading, Int Appl Mech 31, 331-337.
54. Heck OS (1937) The stability of orthotropic elliptic cylinders in pure bending, NACA TM no 834.
55. Hedgren AW and Billington DP (1966) Numerical analysis of translational shell roofs, ASCEJ StructDiv 92,223-244.
56. Herrmann G and Mirsky I (1956) Three-dimensional and shell-theory analysis of axially symmetric motions of cylinders, J Appl Mech 23,563-568.
57. Herrmann G and Mirsky I (1957) On vibrations of cylindrical shells of elliptic cross-section, Tech Rept No 5, Columbia Univ, Contract No AF 18(600)-1247.
58. Hui D and Du IHY (1986) Effects of axial imperfections on vibrations of anti-symmetric cross-ply, oval cylindrical shells, J Appl Mech 53, 675-680.
59. Hutchinson JW (1968) Buckling and initial postbuckling behavior of oval cylindrical shells under axial compression, J Appl Mech 35, 66-72.
60. Hutchinson JW (1973) Post-bilurcation behaviour in the plastic range, J Mech Phys Solids 21,163-191.
61. Hutchinson JW (1974) Plastic buckling, Adv Appl Mech 14,67-144.
62. Ine T, Yamada G, and Kobayashi Y (1984) Free vibration of noncircular cylindrical shells with longitudinal interior partitions, J Sound Vibr 96,133-142.
63. Jones RM (1975) Mechanics of Composite Materials, Hemisphere, New York.
64. Karman T, vonand Tsien H -S (1941) The buckling of thin cylindrical shells under axial compression, J Aeron Sci 8, 303-312.
65. Kempner J (1958) Energy expressions and differential equations for stress and displacement analysis of arbitrary cylindrical shells, J Ship Res 1, 8-19.
66. Kempner J (1960) Unified thin shell theory, PIBAL Rept 556, Polytech Inst, Brooklyn NY.
67. Kempner J (1962) Some results on buckling and postbuckling of cylindrical shells, In Collected Papers on Instability of Shell Structures, NASATND-1510, 173-186.
68. Kempner J and Chen YN (1964) Large deflections of an axially compressed oval cylindrical shell, Proc 11th Int CongrAppl Mech, 299-306, Munich, Springer Verlag, Berlin.
69. Kempner J and Chen YN (1967) Buckling and postbuckling of an axially compressed oval cylindrical shell, Proc Symp on Theory of Shells to Honor Lloyd Hamilton Donnell, 141-183, Univ Houston, McCutchaw Pubi.
70. Kempner J and Chen YN (1968) Postbuckling of an axially compressed oval cylindrical shell, Proc 12th Int Congr Appl Mech, 246-256, Stanford Univ.
71. Kempner J and Chen YN (1974) Buckling and initial postbuckling of oval cylindrical shells under combined axial compression and bending, Trans New York Acad Sci, Ser 11,36, 171-191.
72. Kempner J, Vafakos WP, and Nissel N (1964) Reinforced oval cylinder -Comparison of theory with DTMB tests, J Appl Mech 31, 710-711.
73. Klosner JM (1959) Frequencies of an infinitely long noncircular cylindrical shell. Part II - Plane strain, torsional and flexural modes, PIBAL Rept 552, Polytech Inst, Brooklyn NY.
74. Klosner JM (1960) Free and forced vibrations of a long noncircular cylindrical shell, PIBAL Rept 561, Polytech Inst, Brooklyn NY.
75. Klosner JM and Pohle FV (1958) Natural frequencies of an infinitely long noncircular cylindrical shell, PIBAL Rept 476, Polytech Inst, Brooklyn NY.
76. Koiter WT (1945) On the stability of elastic equilibrium, PhD Thesis, Delft Univ, Holland.
77. Koiter WT (1960) A consistent first approximation in the general theory of thin elastic shells, Proc IUTAM Symp Delft 1959 on The Theory of Thin Elastic Shells, WT Koiter (ed), North Holland, 12-33.
78. Koiter WT (1963a) Elastic stability and postbuckling behavior, Proc Symp Non-Linear Problems, RE Langer (ed), Univ Wisconsin Press, Madison, 257-275.
79. Koiter WT (1963b)The effect of axisymmetric imperfections on the buckling of cylindrical shells under axial compression, Proc Royal Netherlands Acad, Ser R, 66, Amsterdam.
80. Koroleva EM (1974) Stability of cylindrical shells of oval cross-section in the bending stress-state, Prikl Mat Mekh 37, 901-903.
81. Koumousis VK (1996) An explicit method for the free vibrations of noncircular cylindrical panels, J Sound Vib 191, 681-694.
82. Koumousis VK and Armenàkas AE (1983) Free vibrations of simply supported cylindrical shells of oval cross section, AIAA J 21, 1017-1027.
83. Koumousis VK and Armenàkas AE (1984a) Free vibrations of noncircular cylindrical panels with symply supported curved edges, ASCEJ EngMech 110, 810-827.
84. Koumousis VK and Armenàkas AE (1984b) Free vibrations of oval cylindrical panels, ASCE J Eng Mech 110, 1107-1123.
85. Koumousis VK and Armenàkas AE (1986) Vibrations of infinitely long cylindrical shells of noncircular cross section, AIAA J 24, 536-539.
86. Kryukov NN (1984) Numerical solution of problems on the deformation of open flexible noncircular cylindrical shells of variable stiflhess, Sov Appl Mech 20, 1052-1057.
87. Kryukov NN (1986) Nonlinear deformation of noncircular orthotropic cylindrical shells of variable rigidity, SovApplMech 22, 435-439.
88. Kryukov NN (1993) Deformation of orthotropic noncircular cylindrical shells in an elastic bed, Int Appl Mech 29, 204-207.
89. Kumar V and Singh AV (1992) Approximate vibration analysis of noncircular cylinders having varying thickness, AIAA J 30, 1929-1931.
90. Kumar V and Singh AV (1993) Vibration analysis of noncircular cylindrical shells using Bezier functions, J Sound Vib 161,333-354.
91. Kumar V and Singh AV (1995) Vibrations of composite noncircular cylindrical shells, ASME J Vib Acoust 117,470-476.
92. Kumar V and Singh AV (1996) Vibrations of fiber-reinforecd deep shells, ASME J Press Vess Tech 118,407-414.
93. Kurt CE and Boyd DE (1971) Free vibrations of noncircular cylindrical shell segements, A1AA J 9, 239-244.
94. Leissa AW (1973) Vibration of Shells, NASA SP-288. Reprinted, 1993, by the Acoustical Soc of Am.
95. Love AEH (1927) Treatise on the Mathematical Theory of Elasticity, 4th Ed, Cambridge Univ Press, New York.
96. Magnucki K (1993) Some problems of optimisation of beam and shell structures, Rept No 292, Poznan Univ of Tech, Poznan (in Polish)
97. Magnucki K and Szyc W (1996) Optimal design of a cylindrical shell loaded by internal pressure, Struct Optim 11,263-266.
98. Magnucki K and Tertel E (1997) Parametric optimisation of sandwich pipes of rectangular cross-section, Proc XXXVIth Symp Model Mech 4, 217-221, 16-20 Feb. 1997, Polytech Slaska (in Polish).
99. Malkina RL (1960) Vibrations of noncircular cylindrical shells, Inzv AN SSR, Mekh. Masinostr 1, 172-175 (In Russian). English translation in NASA N67-13085, 1967.
100. Malkina RL (1963) Forced Oscillations of Cylindrical Shells, FTD-TT-63-742/1+2, Transl Div, Foreign Tech Div, Wright-Patterson AFB.
101. Marguerre K (1942) Stabilität der Zylinderschale veränderlicher Krümmung, Zentrale für wissenschaftliches Berichtswesen der Luftfahrtforschung des Generalluftzeugmeisters (ZWB), Berlin-Adlershof, Forschungsbericht No 1671.
102. Marguerre K (1951) Stability of the Cylindrical Shell of Variable Curvature, NACA TM No 1302.
103. Marlowe MB and Brogan FA (1971) Collapse of elliptic cylinders under uniform external pressure, AIAA J 9, 2264-2266.
104. Massalas C, Leontitsis A, Tzivanidis G, and Soldatos K (1979) Dynamic behaviour of a noncircular cylindrical panel under initial stress state, Proc 20th Aniv World Congr Shells and Spat Struct 2, Sept 24-28, 1979, Madrid, 2.45-2.58.
105. Massalas C, Soldatos K, and Tzivanidis G (1980) Free vibrations of noncircular cylindrical panels with arbitrary boundary conditions, J Sound Vib 69, 491-495.
106. McDaniel TJ and Logan JD (1971) Dynamics of cylindrical shells with variable curvature, J Sound Vib 19, 39-48.
107. Meyers CA and Hyer MW (1997) Response of elliptical composite cylinders to internal pressure loading, Mech Comp Mat Struct 4, 317-343.
108. Mikhasev GI (1996) Localized families of bending waves in a noncircular cylindrical shell with sloping edges, J Appl Math Mech 60, 629-637.
109. Mindlin RD (1951) Influence of rotatory inertia and shear on flexural vibrations of isotropic elastic plates, J Appl Mech 18, 31-38.
110. Mirsky I and Herrmann G (1957) Nonaxially symmetric motions of cylindrical shells, J Acoust Soc Am 29, 1116-1123.
111. Moxham KE (1971) Buckling tests on individual steel plates in compression, Rep CUED/C-Struct/TR 3, Eng Dept, Cambridge Univ.
112. th Anniv Vol, HG Hopkins and MJSewell (eds) 453-498.
113. Nemish YN (1993) Solution of three-dimensional boundary-value problems for laminated noncircular cylinders, Int Appl Mech 29, 738-744.
114. Noor AK (1973) Noncircular cylinder vibration by multilocal method, J Eng Mech Div, Proc ASCE 99, 389-407.
115. Noor AK (1990) Bibliography of monographs and surveys on shells, Appl Mech Rev 43, 223-234.
116. Noor AK and Stephens WB (1973) Mixed finite-difference scheme for the free vibration analysis of noncircular cylinders, NASA TN D-7107.
117. Noor AK and Burton WS (1990) Assessment of computational models of multilayered composite shells, Appl Mech Rev 43, 67-97.
118. Noor AK and Burton WS (1992a) Mechanics of anisotropic plates and shells - a new look at an old subject, Comput Struct 44, 499-514.
119. Noor AK and Burton WS (1992b) Computational models for high-temperature multilayered composite plates and shells, Appl Mech Rev 45, 419-446.
120. Noor AK, Burton WS, and Bert CW (1996) Computational models for sandwich panels and shells, Appl Mech Rev 49, 155-198.
121. Novozhilov W (1964) The Theory of Thin Elastic Shells, P NoordhofF, Groningen, The Netherlands.
122. Park AC (1965) Dynamics of shell-like lifting bodies Part II. The experimental investigation, Tech Rept AFFDL-TR-65-17, Part II, Wright Patterson AFB, Ohio.
123. Qatu MS (1992) Review of shallow shell vibration research, Shock Vib Dig 24, 3-15.
124. Radlinski RP and Simon MM (1993)Acoustic and elastic wave scattering from elliptic cylindrical shells, J Acoust Soc Am 93, 2443-2453.
125. Reddy JN (1984) A simple higher-order theory for laminated composite plates, J Appl Mech 51, 745-752.
126. Reissner E (1945) The effect of transverse shear deformation on the bending of elastic plates, J Appl Mech 12, A69-A77.
127. Romano F and Kempner J (1958) Stress and displacement analysis of simply supported noncircular cylindrical shells under lateral pressure, PIBAL Rept 415, Polytech Inst, Brooklyn NY.
128. Romano F and Kempner J (1962) Stresses in short noncircular cylindrical shells under lateral pressure, J Appl Mech 29, 669-674.
129. Sanders, J.L. (1959) Improved First Approximation Theory for Thin Shells, NASA Rept R-24.
130. Sathyamoorthy M and Pandalai KAV (1970) Nonlinear flexural vibrations of orthotropic oval shells, Studies in Structural Mechanics, HofFs 65th Anniversary Volume, 47-74, Indian Inst of Tech, Madras-36.
131. Semenyuk NP (1984) Stability of noncircular cylindrical shells under axial comression, SovApplMch 20, 813-818.
132. Sewall JL and Pusey CG (1971) Vibration study of clamped-free elliptical cylindrical shells, AIAA J 9, 1004-1011.
133. Sewall JL, Thompson Jr. WM, and Pusey CG (1971) An experimantal and analytical vibration study of elliptical cylindrical shells, TN D-6089, NASA
134. Sheinman I and Firer M (1994) Buckling analysis of laminated cylindrical shells with arbitrary noncircular cross section, AIAA J 32, 648-654.
135. Shikhlinskaya GT (1986) Stability non-circular cylindrical shells made of inhomogeneous material, Izv Acad Nauk AzSSR Ser Fiz-Tekh Mat Nauk, No 4, 58-63.
136. Shikhlinskaya GT (1987) Loss of stability of a non-circular, transversely inhomogeneous, cylindrical shell subjected to longitudinal compressive forces, Dokl Acad Nauk AzSSR, 43, 3-7.
137. Shirakawa K and Monta M (1982) Vibration and buckling of cylinders with elliptical cross section, J Sound Vibr 84, 121-131.
138. Simitses GJ (1986) Buckling and postbuckling of imperfect cylindrical shells: A review, Appl Mech Rev 39, 1517-1524.
139. Simmonds JG (1974) On an accurate theory for circular cylindrical shells, J Appl Mech 41, 541-542.
140. Simon MM and Radlinski RP (1982) Elastic wave scattering from elliptical shells, J Acoust Soc Am 71,273-281.
141. Slepov BI (1962) Vibrations and stability of anisotropic and sandwich cylindrical shells of arbitrary cross-section, Theory of Shells and Plates, Proc of IVth All-Union Conf, 826-834, Yerevan, Armenian SSR.
142. Slepov BI (1964) Vibrations and stability of an elliptical shell, IzvAkad Nauk USSR, Mekh Mashinostr 3, 144-146.
143. Soedel W (1982) On the vibrations of shells with Timoshenko-Mindlin type shear deflections and rotatory inertia, J Sound Vib 83, 67-79.
144. Sokolnikoff IS (1956) Mathematical Theory of Elasticity, 2nd Ed, McGraw Hill, New York.
145. Soldatos KP (1983) Equivalence of some methods used for the dynamic analysis of cross-ply laminated oval cylindrical shells, J Sound Vib 91, 461-465.
146. Soldatos KP (1984a) A comparison of some theories used for the dynamic analysis of cross-ply laminated circular cylindrical panels, J Sound Vib 97, 305-319.
147. Soldatos K P (1984b) A Flügge-type theory for the analysis of anisotropic laminated non-circular cylindrical shells, Int J Solids Struct 20, 107-120.
148. Soldatos KP (1985) On the theories used for the wave propagation in laminated composite thin elastic shells, ZAMP 36, 120-133.
149. Soldatos KP (1986a) Stability and vibration of thickness shear deformable cross-ply laminated non-circular cylindrical shells, in Nonlinear Analysis of Composite Material Vessels and Components, D Hui et al, (eds), ASME PVP-115, 23-34.
150. Soldatos KP (1986b) On thickness shear deformation theories for the dynamic analysis of non-circular cylindrical shells, Int J Solids Struct 22, 625-641.
151. Soldatos KP (1987) Free vibration analysis of thickness shear deformable cross-ply laminated oval cylindrical shells, in Refined Dynamical Theories of Beams, Plates and Shells; Lect Notes Eng. 28,1 Elishakoff et al (eds), Springer, Berlin, 324-332.
152. ioldatos KP (1988) On certain refined theories for plate bending, J Appl Mech 55, 994-995.
153. Soldatos KP (1991) A refined laminated plate and shell theory with applications, J Sound Vib 144, 109-129.
154. Soldatos KP (1992a) Non-linear analysis of transverse shear deformable laminated composite cylindrical shells part I: derivation of governing equations, ASME J Pressure Vessels Tech 114,105-109.
155. Soldatos KP (1992b) Non-linear analysis of transverse shear deformable laminated composite cylindrical shells part II: buckling of axially compressed cross-ply circular and oval cylinders, ASME J Pressure Vessels Tech 114, 110-114.
156. Soldatos KP (1994) Review of three-dimensional dynamic analyses of circular cylinders and cylindrical shells, Appl Mech Rev 47, 501-516.
157. Appl Mech Rev vol 52, no 8, August 1999 274 Soldatos: Mechanics of cylindrical shells
158. Soldatos KP and Tzivanidis GJ (1982) Buckling and vibration of cross ply laminated non-circular cylindrical shells, J Sound Vib 82, 425-434.
159. Soldatos KP and Timarci T (1993) A unified formulation of laminated composite shear deformable five-degrees-of-freedom cylindrical shell theories, Compos Struct 25,165-171.
160. Soldatos KP and Messina A (1998) Vibration studies of cross-ply laminated shear deformable-circular cylinders on the basis of orthogonal polynomials, J Sound Vib 218.,219-243.
161. Spence J and Toh SL (1979) Collapse of thin orthotropic elliptical cylindrical shells under combined bending and pressure loads, J Appl Mech 46, 363-371.
162. Sun G (1991) Buckling and initial post-buckling behavior of laminated oval cylindrical shells under axial compression, J Appl Mech 58, 848-851.
163. Suzuki K and Leissa AW (1985) Free vibrations of noncircular cylindrical shells having circumferential varying thickness, J Appl Mech 52, 149-154.
164. Suzuki K and Leissa AW (1986) Exact solutions for the free vibrations of open cylindrical shells with circumferentially varying curvature and thickness, J Sound Vib 107, 1-15.
165. Suzuki K and Leissa AW (1990) Analysis of free vibrations of noncircular thick cylindrial shells having circumferential varying thickness, IntJ Solids Struct 26, 255-270.
166. Suzuki K, Tamura S, Kosawada T, and Takahashi S (1978) In-plane vibrations of curved bars, BullJSME 21,618-627.
167. Suzuki K, Takahashi S, and Ishiyama H (1983) Vibrations of noncircular cylindrical shells, Bull JSME 26, 818-826.
168. Suzuki K, Shikanai G, and Leissa AW (1994) Free vibrations of laminated composite thin noncircular cylindrical shells, J Appl Mech 61, 861-871.
169. Suzuki K, Shikanai G and Leissa AW (1996) Free vibrations of laminated composite thick noncircular cylindrical shells, Int J Solids Struct 33, 4097-4100.
170. Tang SC, Chu CC, and Yeung KS (1982) Elasto-plastic bending of noncircular cylindrical shells, Proc Int Conf FEM 1, 252-263, He and Cheung (eds), Shangai, China.
171. Tang SC, Chu CC, and Yeung KS (1985) Collapse of long, noncircular, cylindrical shells under pure bending, Comp Struct 21, 1345-1353.
172. Teng JG (1996) Buckling of shells: Recent advances and trends, Appl Mech Rev 49,263-506.
173. Tennyson RC and Muggeridge DB (1969) Buckling of axisymmetric imperfect circular cylindrical shells under axial compression, AIAA J 7, 2127-2131.
174. Tennyson RC, Booton M, and Caswell RD (1971) Buckling of imperfect elliptical cylindrical shells under axial compression, AIAA J 9, 250-255.
175. Tennyson RC and Hansen JS (1983) Optimum design for buckling of laminated cylinders, Proc IUTAM Symp: Collapse: The Buckling of Structures in Theory and Practice, JMT Thompson and GW Hunt (eds), Cambridge Univ Press, Cambridge.
176. Thorton, E. A (1993) Thermal buckling of plates and shells, Appl Mech Rev 46, 274-674.
177. Timarci T and Soldatos KP (1995) Comparative dynamic studies for symmetric cross-ply circular cylindrical shells on the basis of a unified shear deformable shell theory, J Sound Vib 187,609-624.
178. Timoshenko SP (1922) On the transverse vibrations of bars of uniform cross-section, Philos Mag 43, 125-131.
179. Timoshenko SP and Gere JM (1961) Theory of Elastic Stability, 2nd Ed, McGraw Hill, New York.
180. Tvergaard V (1976) Buckling of elastic-plastic oval cylindrical shells under axial compression, IntJ Solids Struct 12, 683-691.
181. Tvergaard V (1983) On the transition from a diamond mode of collapse in cylindrical shells, IntJ Solids Struct 19, 845-856.
182. Tvergaard V and Needleman A (1980) On the localization of buckling patterns, J Appl Mech 47, 613-619.
183. Vafakos WP (1964) Analysis of uniform deep oval reinforcing rings, J Ship Res 7,21-28.
184. Vafakos WP, Romano F, and Kempner J (1962) Clamped short oval cylindrical shells under hydrostatic pressure, J Aerospace Sci 29, 1347-1357.
185. Vafakos WP, Nissel N, and Kempner J (1964) Energy solution for simply supported oval shells, AIAA J 2, 555-557.
186. Vafakos WP, Nissel N, and Kempner J (1966) Pressurised oval cylinders with closely spaced rings, AIAA J 4, 338-345.
187. Vasilenko AT and Golub GP (1986) Numerical analysis of the stress state of open noncircular cylindrical shells, Sov Appl Mech 10, 917-920.
188. Vlasov V (1964) General theory of shell and its application in engineering, NASA TT F-99.
189. Volpe V, Chen YN, and Kempner J (1980) Buckling of orthogonally stiffened finite oval cylindrical shells under axial compression, AIAA J 18, 571-580.
190. Vronnay DF and Smith BL (1970) Free vibration of circular cylindrical shells of finite length, AIAA JS, 601-603.
191. Warburton GB and Soni SR (1977) Resonant response of cylindrical shells, J Sound Vib 53, 1-23.
192. Watanabe N, Suzuki K, and Shikanai G (1995) Vibration analysis of laminated composite elliptical cylindrical shells, Proc JSME Dyn Des Conf ‘95 A, 72-75, Aug 21-24, 1995, Tokyo.
193. Whitney JM (1987) Structural Analysis of Laminated Anisotropic Plates, Technomic, Lancaster.
194. Yamada G, Irie T, and Tagawa Y (1984) Free vibrations of non-circular cylindrical shells with variable circumferential profile, J Sound Vib 95, 117-136.
195. Yamada G, Irie T, and Notoya S (1985) Natural frequencies of elliptical cylindrical shells, J Sound Vib 101, 133-139.
196. Yao JC and Jenkins WC (1970) Buckling of elliptic cylinders under normal pressure, AIAA J 8, 22-27.
197. Zhu JX and Cheung YK (1992) Analysis of closed cross-section thin-walled structures, Thin-Walled Struct 14, 21-35