Particle breakage and attrition

KONA Powder and Particle Journal

Volumn 18, Issue May, 2000, Pages 108-120

  Kalman, Haim ^a  

^a BEN GURION UNIVERSITY OF THE NEGEV   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

BREAKAGE MECHANISM; COMPLEX MECHANISMS; ENGINEERING DESIGN; ENVIRONMENTAL POLLUTIONS; EXPERIMENTAL SYSTEM; LITERATURE REVIEWS; PARTICLE BREAKAGE; PARTICULATE MATERIALS;

MATERIALS HANDLING;

EID: 0000003910     PISSN: 02884534     EISSN: 21875537     Source Type: Journal    
DOI: 10.14356/kona.2000017     Document Type: Article

References (65)

1. PJ Hill and K. M. Ng: Statistics of Multiple Particle Breakage, AIChEJournal 42(6) (1996) pp. 1600-1611.
2. A. V. Potapov and C. S. Campbell: Computer Simulation of Particle Breakage, Proceedings of the First Int. Particle Technology Forum, Denver, USA (1994) pp. 225-230.
3. British Materials Handling Board: Particle Attrition: State-ofthe-Art Review, Trans. Tech. Publications, Germany (1987).
4. R. Hogg: Breakage Mechanisms and Mill Performance in Ultrafine Grinding, Powder Technology 105 (1999) pp. 135-140.
5. H. Kalman and D. Goder: Design Criteria for Particle Attrition, Advanced Powder Technol. 9 (1998) pp. 153-167.
6. S. Rajagopal, K. M. Ng and J. M. Douglas: A Hierarchical Procedure for the Conceptual Design of Solids Processes, Comput. Chern. Eng. 16 (1992) 675 p.
7. B. J. Ennis, J. Green and R. Davies: Particle Technology: the Legacy of Neglect in the US, Chern. Eng. Prog. 90 (1995) 32 p.
8. S. Y. Yashima, Y. Kanda and S. Sano: Relationship Between Particle Size and Fracture Energy or Impact Velocity Required to Fracture as Estimated from Single Particle Crushing, Powder Technology 51 (1987) 277 p.
9. M. Ghadiri, K. R. Yuregir, H. M. Pollock, J. D. J. Ross and N. Rolfe: Influence of Processing Conditions on Attrition of NaCl Crystals, Powder Tech. 65 (1991) 311 p.
10. C. R. Bemrose andJ. Bridgwater: A Review of Attrition and Attrition Test Methods, Powder Technol. 49 (1987) pp. 97-126.
11. M. J. Adams, M. A. Mullier and J. P. K. Seville: Agglomerate Strength Measurement Using a Uniaxial Confined Compression Test, Powder Technology 78 (1994) pp. 5-13.
12. P. H. Shipway and I. M. Hutchings: Attrition of Brittle Spheres by Fracture Under Compression and Impact Loading, Powder Technology 76 (1993) pp. 23-30.
13. O. Tsoungui, D. Vallet and J-C Charmet: Numerical Model of Crushing of Grains Inside Two Dimensional Granular Materials, Powder Technology 105 (1999) pp. 190-198.
14. K. Danjo, H. Kato, A. Otsuka and K. Ushimaru: Fundamental Study on the Evaluation of Strength of Granular particles, Chern. Pharm. Bull. 42(12) (1994) pp. 2598-2603.
15. L. Sikong, H. Hashimoto and S. Yashima: Breakage Behavior of Fine Particles of Brittle Minerals and Coals, Powder Technology 61 (1990) pp. 51-57.
16. M. K. Gundepudi, B. V. Sankar, J. J. Mecholsky Jr. and D. C. Clupper: Stress Analysis of Brittle Spheres Under Multiaxial Loading, Powder Technology 94 (1997) pp. 153-161.
17. H. Kalman, D. Goder and S. Targan: Preliminary Investigation on the Effect of Production Parameters on the Strength of Large Tablets, Part. Part. Syst. Charact. 15 (1998) pp. 150-155.
18. J. J. Mecholsky Jr., D. C. Clupper, B. Sankar and M. Gundepudi: Fracture Mechanics, Fractals and Failure Analysis as Tools for Understanding Attrition and Comminution of Particles, World Congress on Particle Technology 3, Brighton, UK, Paper 127 (1998).
19. M. Song, B. M. Li, A. Steiff and P. M. Weinspach: Stochastic Simulation of Particulate Dynamic Breakup, Journal of Chemical Engineering ofJapan 31 (2) (1998) pp. 201-207.
20. Y. Kanda, S. Takahashi, Y. Hata and T. Honma: The Compressive Crushing of Powder Bed, Kona 7 (1989) pp. 37-42.
21. L. E. Holman: The Compaction Behavior of Particulate Materials. An Elucidation Based on Percolation Theory, Powder Technology 66 (1991) pp. 265-280.
22. J. Liu and K. Schilinert: Modeling of Interparticle Breakage, Int. J. Miner. Process 44-45 (1996) pp. 101-115.
23. P. Guigon, A. Thomas andJ. Dodds: Experimental Study of a jet Impacting on a Plate, Proceedings IFPRI Annual Meeting, Goslar (1994).
24. L. M. Tavares and R. P. King: Single-Particle Fracture Under Impact Loading, Int. J. Miner. Process. 54 (1998) pp. 1-28.
25. L. M. Tavares: Energy Absorbed in Breakage of Single Particles in Drop Weight Testing, Minerals Engineering 12 (1999) pp. 43-50.
26. A. D. Salman, D. A. Gorham and A Verba: A Study of Solid Particle Failure Under Normal and Oblique Impact, Wear 186-187 (1995) pp. 92-98.
27. A. D. Salman, M. Szabo, I. Angyal, A Verba and D. Mills: The Design of Pneumatic Conveying Systems to Minimise Product Degredation, In: Proc. 13th Powder and Bulk Solids Conf., Chicago, IL (1988).
28. A Verba, A. D. Salman and M. Szabo: Particle Degredation in Dilute Pneumatic Conveying, In: Proc. 5th Conf. On Applied Chemistry Unit Operations and Processes, Budapest, Hungary (1989).
29. A. D. Salman, A. Verba and D. Mills: Particle Degredation in Dilute Phase Pneumatic Conveying Systems, In: Proc. 18th Powder and Bulk Solids Conf., Chicago, IL (1992).
30. M. Ghadiri and D. G. Papadopoulos: Influence of Material Properties on Attrition and Comminution of Particulate Solids, In: Proc. IFPRI Annual Meeting, Goslar (1994).
31. D. A. Gorham and A. D. Salman: The Fracture of Glass Spheres, The 9th European Symposium on Comminution, 8-10, Albi, France (1998).
32. J. A. S. Cleaver, M. Ghadiri and N. Rolfe: Impact Attrition of Sodium Carbonate Monohydrate Crystals, Powder Technology 76 (1993) pp. 15-22.
33. P. M. M. Vervoorn and B. Scarlett: The Attrition Behaviour of Alumina Extrudates in Pneumatic Transport and Fluidized Beds, Proc. of the Powder and Bulk Solids Conf., Chicago, USA (1987).
34. J. J. Pis, A. B. Fuertes, A. Artos, A. Suarey and F. Rubiera: Attrition of Coal Ash Particles in a Fluidized Bed, Powder Technology 66 (1991) pp. 41-46.
35. S. Veesler and R. Boistelle: Attrition of Hydrargillite (Al OHJ 3): Mechanism and Quantification of Particle Fragility by a New Attrition Index, Powder Technology 76 (1993) pp. 49-57.
36. M. Mebtoul, J. F. Large and P. Guigon: High Velocity Impact of Particles on a Target-an Experimental Study, Int. Miner. Process. 44-45 (1996) pp. 77-91.
37. J. Subero, Z. Ning, M. Ghadiri and C. Thornton: Effect of Interface Energy on the Impact Strength of Agglomerates, Powder Technology 105 (1999) pp. 66-73.
38. A. V. Potatov and C. S. Campbell: The Two Mechanisms of Particle Impact Breakage and the Velocity Effect, Powder Technology 93 (1997) pp. 13-21.
39. C. Couroyer, Z. Ning and M. Ghadiri: Distinct Element Analysis of Bulk Crushing: Effect of Particle Proper-ties and Loading Rate, Powder Technology 109 (2000) pp. 241-254.
40. C. Couroyer, Z. Ning, F. Bassam and M. Ghadiri: Bulk Crushing Behaviour of Porous Alumina Particles Under Compressive Loading, World Congress on Particle Technology 3, Brighton, UK, Paper 61 (1998).
41. C. Couroyer, Z. Ning, M. Ghadiri, N. Brunard, F. Kolenda, D. Bortzmeyer and P. Laval: Breakage of Macroporous Alumina Beads Under Compressive Loading: Simulation and Experimental Validation, Powder Technology 105 (1999) pp. 57-65.
42. O. Gutsche and D. W. Fuerstenau: Fracture Kinetics of Particle Bed Comminution-Ramifications for Fines Production and Mill Optimization, Powder Technology 105 (1999) pp. 113-118.
43. P. H. Shipway and I. M. Hutchings: Fracture of Brittle Spheres Under Compression and Impact Loading. II. Results/or Bead-Glass and Sapphire Spheres, Philosophical Magazine A 67(6) (1993) pp. 1405-1421.
44. P. H. Shipway and I. M. Hutchings: Fracture of Brittle Spheres Under Compression and Impact Loading. I. Elastic Stress Distribution, Philosophical Magazine A, 67 (6) (1993) pp. 1389-1404.
45. P. M. M Vervoorn and L. G. Austin: The Analysis of Repeated Breakage Events as an Equivalent Rate Process, Powder Technology 63 (1990) pp. 141-147.
46. A. S. Kheifets and I. J. Lin: Energetic Approach to Kinetics of Batch Ball Milling, Int. J. Miner. Process 54 (1998) pp. 81-97.
47. A. V. Potapov and C. S. Campbell: Computer Simulation of Shear-Induces Particle Attrition, Powder Technology 94 (1997) pp. 109-122.
48. H. Berthiaux, C. Chiron and J. Dodds: Modeling Fine Grinding in a Fluidized Bed Opposed jet Mill Part II: Continuous Grinding, Powder Technology 106 (1999) pp. 88-97.
49. H. Berthiaux and J. Dodds: Modelling Fine Grinding in a Fluidized Bed Opposed jet Mill Part I: Batch Grinding Kinetics, Powder Technology 106 (1999) pp. 78-87.
50. D. Goder and H. Kalman: Fatigue Characteristics of Particles, World Congress on Particle Technology 3, Brighton, UK, Paper 130 (1998).
51. D. Goder, O. Eskin and H. Kalman: Fatigue Characteristics of Granular Materials, The Third Israeli Conference for Conveying and Handling of Particulate Solids 1, Eds. H. Kalman, A. Levy and M. Hubert, Dead Sea, Israel (2000) pp. 3. 32-3. 38.
52. E. Coppinger, L. Discepola, G. I. Tardos and G. Bellamy: The Influence of Granule Morphology on Attrition Dur-ing Fluidization and Pneumatic Transport, Advances Powder Technol. 3(3) (1992) pp. 201-218.
53. W. J. Beekman, G. M. H. Meesters and B. Scarlett: Measurement of Granule Impact Strength Distributions in a Vibrating Container, World Congress on Particle Technology 3, Brighton, UK, Paper 131 (1998).
54. Q-Q Zhao, S. Yamada and G. Jimbo: The Mechanism and Grinding Limit of Planetary Ball Milling, Kona 7 (1989) pp. 29-36.
55. S. L. Mckee, T. Dyakowski, R. A. Williams, T. A. Bell and T. Allen: Solids Flow Imaging and Attrition Studies in a Pneumatic Conveyer, Powder Technology 82 (1995) pp. 105-113.
56. J. D. Hilbert: Alternatives in Pneumatic Conveying Bends, The Best of Bulk Solids Handling, Pneumatic Conveying of Bulk Powders, Vol. D/86, Trans Tech Publications (1984) pp. 107-110.
57. V. K. Agarwal, D. Mills and J. S. Mason: Some Aspects of Bend Erosion in Pneumatic Conveying System Pipelines, The Best of Bulk Solids Handling, Pneumatic Conveying of Bulk Powders, Vol. D/86, Trans Tech Publications (1985) pp. 111-116.
58. T. A. Bell, A. Boxman and J. B. Jacobs: Attrition of Salt During Pneumatic Conveying, Proceedings of The 5th World Congress of Chemical Engineering V (1996) pp. 238-243.
59. D. G. Papadopoulos, C. S. Teo, M. Ghadiri and T. A. Bell: Attrition of Common Salt, World Congress on Particle Technology 3, Brighton, UK, Paper 156 (1998).
60. H. Kalman and D. Goder: Pressure Drop, Wear and Attrition in Various Bends for Pneumatic Conveying Pipelines, Proceedings of the 5th World Congress of Chemical Engineering VI (1996) pp. 411-416.
61. K. Aked, D. Goder, H. Kalman and A. Zvieli: Attrition of Very Fine Powders During Pneumatic Conveying, Powder Handling and Processing 9 (1997) pp. 345-348.
62. H. Kalman and K. Aked: Attrition of Fine Powders and Granules at Various Bends During Pneumatic Conveying, World Congress on Particle Technology 3, Brighton, UK, Paper 154 (1998).
63. H. Kalman: Attrition Control by Pneumatic Conveying, Powder Technology 104 (1999) pp. 214-220.
64. H. Kalman: Attrition of Powders and Granules at Various Bends During Pneumatic Conveying, Powder Technology 112 (2000) pp. 244-250.
65. T. Taylor: Specific Energy Consumption and Particle Attrition in Pneumatic Conveying, Powder Technology 95 (1998) pp. 1-6.